Download or read book Active Flow and Combustion Control 2021 written by Rudibert King and published by Springer Nature. This book was released on 2021-11-12 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest theoretical and experimental findings in the field of active flow and combustion control, in the context of energy conversion for power and propulsion systems. It covers new developments in actuator technology and sensing, robust and optimal open- and closed-loop control, model reduction for control purposes, and unsteady turbine cooling and performance, among other relevant topics. Gathering contributions to the Active Flow and Combustion Control (AFCC 2021), held virtually on September 28-29, 2021, from the Technische Universität Berlin, Germany, this book describes research that has been carried out within, and supported by, the collaborative research center SFB 1029 on “Substantial efficiency increase in gas turbines through direct use of coupled unsteady combustion and flow dynamics”, and funded by the German Research Foundation (DFG). It highlights theoretical and practical aspects, and corresponding solutions, that are important for the development of future energy conversion systems, thus offering a timely guide for researchers and practitioners in the field of aeronautics, turbomachinery, control and combustion.
Download or read book Active Flow and Combustion Control 2021 written by Rudibert King and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest theoretical and experimental findings in the field of active flow and combustion control, in the context of energy conversion for power and propulsion systems. It covers new developments in actuator technology and sensing, robust and optimal open- and closed-loop control, model reduction for control purposes, and unsteady turbine cooling and performance, among other relevant topics. Gathering contributions to the Active Flow and Combustion Control (AFCC 2021), held virtually on September 28-29, 2021, from the Technische Universität Berlin, Germany, this book describes research that has been carried out within, and supported by, the collaborative research center SFB 1029 on "Substantial efficiency increase in gas turbines through direct use of coupled unsteady combustion and flow dynamics", and funded by the German Research Foundation (DFG). It highlights theoretical and practical aspects, and corresponding solutions, that are important for the development of future energy conversion systems, thus offering a timely guide for researchers and practitioners in the field of aeronautics, turbomachinery, control and combustion. .
Download or read book Combustion Chemistry and the Carbon Neutral Future written by Kenneth Brezinsky and published by Elsevier. This book was released on 2023-02-16 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the demands for cleaner, more efficient, reduced and zero carbon emitting transportation increase, the traditional focus of Combustion Chemistry research is stretching and adapting to help provide solutions to these contemporary issues. Combustion Chemistry and the Carbon Neutral Future: What will the Next 25 Years of Research Require? presents a guide to current research in the field and an exploration of possible future steps as we move towards cleaner, greener and reduced carbon combustion chemistry. Beginning with a discussion of engine emissions and soot, the book goes on to discuss a range of alternative fuels, including hydrogen, ammonia, small alcohols and other bio-oxygenates, natural gas, syngas and synthesized hydrocarbon fuels. Methods for predicting and improving efficiency and sustainability, such as low temperature and catalytic combustion, chemical looping, supercritical fluid combustion, and diagnostic monitoring even at high pressure, are then explored. Some novel aspects of biomass derived aviation fuels and combustion synthesis are also covered. Combining the knowledge and experience of an interdisciplinary team of experts in the field, Combustion Chemistry and the Carbon Neutral Future: What will the Next 25 Years of Research Require? is an insightful guide to current and future focus areas for combustion chemistry researchers in line with the transition to greener, cleaner technologies. - Provides insight on current developments in combustion chemistry as a tool for supporting a reduced-carbon future - Reviews modeling and diagnostic tools, in addition to key approaches and alternative fuels - Includes projections for the future from leaders in the field, pointing current and prospective researchers to potentially fruitful areas for exploration
Download or read book Advances in Critical Flow Dynamics Involving Moving Deformable Structures with Design Applications written by Marianna Braza and published by Springer Nature. This book was released on 2021-02-10 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the latest knowledge concerning critical phenomena arising in fluid-structure interaction due to movement and/or deformation of bodies. The focus of the book is on reporting progress in understanding turbulence and flow control to improve aerodynamic / hydrodynamic performance by reducing drag, increasing lift or thrust and reducing noise under critical conditions that may result in massive separation, strong vortex dynamics, amplification of harmful instabilities (flutter, buffet), and flow -induced vibrations. Theory together with large-scale simulations and experiments have revealed new features of turbulent flow in the boundary layer over bodies and in thin shear layers immediately downstream of separation. New insights into turbulent flow interacting with actively deformable structures, leading to new ways of adapting and controlling the body shape and vibrations to respond to these critical conditions, are investigated. The book covers new features of turbulent flows in boundary layers over wings and in shear layers immediately downstream: studies of natural and artificially generated fluctuations; reduction of noise and drag; and electromechanical conversion topics. Smart actuators as well as how smart designs lead to considerable benefits compared with conventional methods are also extensively discussed. Based on contributions presented at the IUTAM Symposium “Critical Flow Dynamics involving Moving/Deformable Structures with Design applications”, held in June 18-22, 2018, in Santorini, Greece, the book provides readers with extensive information about current theories, methods and challenges in flow and turbulence control, and practical knowledge about how to use this information together with smart and bio-inspired design tools to improve aerodynamic and hydrodynamic design and safety.
Download or read book Nonlinear Model Predictive Control of Combustion Engines written by Thivaharan Albin Rajasingham and published by Springer Nature. This book was released on 2021-04-27 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the nonlinear model predictive control (NMPC) concept for application to innovative combustion engines. Readers can use this book to become more expert in advanced combustion engine control and to develop and implement their own NMPC algorithms to solve challenging control tasks in the field. The significance of the advantages and relevancy for practice is demonstrated by real-world engine and vehicle application examples. The author provides an overview of fundamental engine control systems, and addresses emerging control problems, showing how they can be solved with NMPC. The implementation of NMPC involves various development steps, including: • reduced-order modeling of the process; • analysis of system dynamics; • formulation of the optimization problem; and • real-time feasible numerical solution of the optimization problem. Readers will see the entire process of these steps, from the fundamentals to several innovative applications. The application examples highlight the actual difficulties and advantages when implementing NMPC for engine control applications. Nonlinear Model Predictive Control of Combustion Engines targets engineers and researchers in academia and industry working in the field of engine control. The book is laid out in a structured and easy-to-read manner, supported by code examples in MATLAB®/Simulink®, thus expanding its readership to students and academics who would like to understand the fundamental concepts of NMPC. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Combustion Physics written by Michael A. Liberman and published by Springer Nature. This book was released on 2021-11-14 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest achievements and original research work in physics of combustion processes and application of the methods developed in combustion physics for astrophysical problems of stars burning, supernovae explosions and a confined thermonuclear fusion. All the materials in the book are presented in a concise and easily accessible way, but at the same time provides a deep physical inside in the phenomena considered. It is an effective theoretical course with the direct practical implications in engineering fields of engine’s development, energy production, safety issues inherent to terrestrial combustion, as well as in thermonuclear combustion in the inertial fusion. This book is aimed at university students, Ph.D. students and engineers, as well as professionals in combustion, energy-related research, astrophysics and researchers in neighboring fields.
Download or read book Model Reduction of Complex Dynamical Systems written by Peter Benner and published by Springer Nature. This book was released on 2021-08-26 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume presents some of the latest research related to model order reduction of complex dynamical systems with a focus on time-dependent problems. Chapters are written by leading researchers and users of model order reduction techniques and are based on presentations given at the 2019 edition of the workshop series Model Reduction of Complex Dynamical Systems – MODRED, held at the University of Graz in Austria. The topics considered can be divided into five categories: system-theoretic methods, such as balanced truncation, Hankel norm approximation, and reduced-basis methods; data-driven methods, including Loewner matrix and pencil-based approaches, dynamic mode decomposition, and kernel-based methods; surrogate modeling for design and optimization, with special emphasis on control and data assimilation; model reduction methods in applications, such as control and network systems, computational electromagnetics, structural mechanics, and fluid dynamics; and model order reduction software packages and benchmarks. This volume will be an ideal resource for graduate students and researchers in all areas of model reduction, as well as those working in applied mathematics and theoretical informatics.
Download or read book Advanced Technologies in Flow Dynamics and Combustion in Propulsion and Power written by Lei Luo and published by Frontiers Media SA. This book was released on 2022-08-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Operations Management written by Antonella Petrillo and published by BoD – Books on Demand. This book was released on 2021-03-03 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global competition has caused fundamental changes in the competitive environment of the manufacturing and service industries. Firms should develop strategic objectives that, upon achievement, result in a competitive advantage in the market place. The forces of globalization on one hand and rapidly growing marketing opportunities overseas, especially in emerging economies on the other, have led to the expansion of operations on a global scale. The book aims to cover the main topics characterizing operations management including both strategic issues and practical applications. A global environmental business including both manufacturing and services is analyzed. The book contains original research and application chapters from different perspectives. It is enriched through the analyses of case studies.
Download or read book System and Data Driven Methods and Algorithms written by Peter Benner and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-11-08 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: An increasing complexity of models used to predict real-world systems leads to the need for algorithms to replace complex models with far simpler ones, while preserving the accuracy of the predictions. This two-volume handbook covers methods as well as applications. This first volume focuses on real-time control theory, data assimilation, real-time visualization, high-dimensional state spaces and interaction of different reduction techniques.
Download or read book Rock Dynamics Progress and Prospect Volume 1 written by Jianchun Li and published by CRC Press. This book was released on 2022-12-06 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Dynamics: Progress and Prospect contains 153 scientific and technical papers presented at the Fourth International Conference on Rock Dynamics and Applications (RocDyn-4, Xuzhou, China, 17-19 August 2022). The two-volume set has 7 sections. Volume 1 includes the first four sections with 6 keynotes and 5 young scholar plenary session papers, and contributions on analysis and theoretical development, and experimental testing and techniques. Volume 2 contains the remaining three sections with 74 papers on numerical modelling and methods, seismic and earthquake engineering, and rock excavation and engineering. Rock Dynamics: Progress and Prospect will serve as a reference on developments in rock dynamics scientific research and on rock dynamics engineering applications. The previous volumes in this series (RocDyn-1, RocDyn-2, and RocDyn-3) are also available via CRC Press.
Download or read book Innovative Data Communication Technologies and Application written by Jennifer S. Raj and published by Springer Nature. This book was released on 2022-02-24 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research in the fields of computational intelligence, ubiquitous computing models, communication intelligence, communication security, machine learning, informatics, mobile computing, cloud computing, and big data analytics. The best selected papers, presented at the International Conference on Innovative Data Communication Technologies and Application (ICIDCA 2021), are included in the book. The book focuses on the theory, design, analysis, implementation, and application of distributed systems and networks.
Download or read book Active Flow and Combustion Control 2018 written by Rudibert King and published by Springer. This book was released on 2018-09-03 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest theoretical and experimental findings in the field of active flow and combustion control. It covers new developments in actuator technology and sensing, in robust and optimal open- and closed-loop control, as well as in model reduction for control, constant volume combustion and dynamic impingement cooling. The chapters reports oncutting-edge contributions presented during the fourth edition of the Active Flow and Combustion Control conference, held in September 19 to 21, 2018 at the Technische Universität Berlin, in Germany. This conference, as well as the research presented in the book, have been supported by the collaborative research center SFB 1029 on “Substantial efficiency increase in gas turbines through direct use of coupled unsteady combustion and flow dynamics”, funded by the DFG (German Research Foundation). It offers a timely guide for researchers and practitioners in the field of aeronautics, turbomachinery, control and combustion.
Download or read book The Proceedings of 2023 4th International Symposium on Insulation and Discharge Computation for Power Equipment IDCOMPU2023 written by Xuzhu Dong and published by Springer Nature. This book was released on 2024-03-28 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the 2023 4th International Symposium on Insulation and Discharge Computation for Power Equipment (IDCOMPU2023), held in Wuhan, China. The topics covered include but are not limited to: insulation, discharge computations, electric power equipment, and electrical materials. The papers share the latest findings in the field of insulation and discharge computations of electric power equipment, making the book a valuable asset for researchers, engineers, university students, etc.
Download or read book Progress in Astronautics and Aeronautics written by and published by . This book was released on 1963 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Energy and Combustion written by Ashwani K. Gupta and published by Springer Nature. This book was released on 2021-08-07 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art advances in several areas of importance in energy, combustion, power, propulsion, environment using fossil fuels and alternative fuels, and biofuels production and utilization. Availability of clean and sustainable energy is of greater importance now than ever before in all sectors of energy, power, mobility and propulsion. Written by internationally renowned experts, the latest fundamental and applied research innovations on cleaner energy production as well as utilization for a wide range of devices extending from micro scale energy conversion to hypersonic propulsion using hydrocarbon fuels are provided. The tailored technical tracks and contributions from the world renowned technical experts are portrayed in the respective field to highlight different but complementary views on fuels, combustion, power and propulsion and air toxins with special focus on current and future R&D needs and activities. The energy and environment sustainability require a multi-pronged approach involving development and utilization of new and renewable fuels, design of fuel-flexible combustion systems that can be easily operated with the new fuels, and develop novel and environmentally friendly technologies for improved utilization of all kinds of gas, liquid and solid fuels. This volume is a useful book for practicing engineers, research engineers and managers in industry and research labs, academic institutions, graduate students, and final year undergraduate students in Mechanical, Chemical, Aerospace, Energy and Environmental Engineering.
Download or read book Active Flow Control written by Rudibert King and published by Springer Science & Business Media. This book was released on 2007-05-31 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains contributions presented at the Active Flow Control 2006 conference, held September 2006, at the Technische Universität Berlin, Germany. It contains a well balanced combination of theoretical and experimental state-of-the-art results of Active Flow Control. Coverage combines new developments in actuator technology, sensing, robust and optimal open- and closed-loop control and model reduction for control.
