Download or read book Active Control of Vibration written by Christopher C. Fuller and published by Academic Press. This book was released on 1996-02-08 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a companion text to Active Control of Sound by P.A. Nelson and S.J. Elliott, also published by Academic Press. It summarizes the principles underlying active vibration control and its practical applications by combining material from vibrations, mechanics, signal processing, acoustics, and control theory. The emphasis of the book is on the active control of waves in structures, the active isolation of vibrations, the use of distributed strain actuators and sensors, and the active control of structurally radiated sound. The feedforward control of deterministic disturbances, the active control of structural waves and the active isolation of vibrations are covered in detail, as well as the more conventional work on modal feedback. The principles of the transducers used as actuateors and sensors for such control strategies are also given an in-depth description. The reader will find particularly interesting the two chapters on the active control of sound radiation from structures: active structural acoustic control. The reason for controlling high frequency vibration is often to prevent sound radiation, and the principles and practical application of such techniques are presented here for both plates and cylinders. The volume is written in textbook style and is aimed at students, practicing engineers, and researchers. Combines material from vibrations, signal processing, mechanics, and controls Summarizes new research in the field

Download or read book Vibration Control of Active Structures written by A. Preumont and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: My objective in writing this book was to cross the bridge between the structural dynamics and control communities, while providing an overview of the potential of SMART materials for sensing and actuating purposes in active vibration c- trol. I wanted to keep it relatively simple and focused on systems which worked. This resulted in the following: (i) I restricted the text to fundamental concepts and left aside most advanced ones (i.e. robust control) whose usefulness had not yet clearly been established for the application at hand. (ii) I promoted the use of collocated actuator/sensor pairs whose potential, I thought, was strongly underestimated by the control community. (iii) I emphasized control laws with guaranteed stability for active damping (the wide-ranging applications of the IFF are particularly impressive). (iv) I tried to explain why an accurate pred- tion of the transmission zeros (usually called anti-resonances by the structural dynamicists) is so important in evaluating the performance of a control system. (v) I emphasized the fact that the open-loop zeros are more difficult to predict than the poles, and that they could be strongly influenced by the model trun- tion (high frequency dynamics) or by local effects (such as membrane strains in piezoelectric shells), especially for nearly collocated distributed actuator/sensor pairs; this effect alone explains many disappointments in active control systems.

Download or read book Active Control of Noise and Vibration written by Colin Hansen and published by CRC Press. This book was released on 2012-11-02 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating active control of both sound and vibration, this comprehensive two-volume set combines coverage of fundamental principles with the most recent theoretical and practical developments. The authors explain how to design and implement successful active control systems in practice and detail the pitfalls one must avoid to ensure a reliable and stable system. Extensively revised, updated, and expanded throughout, the second edition reflects the advances that have been made in algorithms, DSP hardware, and applications since the publication of the first edition.

Download or read book Dynamic Modeling and Active Vibration Control of Structures written by Moon Kyu Kwak and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the active vibration control techniques which have been developed to suppress excessive vibrations of structures. It covers the fundamental principles of active control methods and their applications and shows how active vibration control techniques have replaced traditional passive vibration control. The book includes coverage of dynamic modeling, control design, sensing methodology, actuator mechanism and electronic circuit design, and the implementation of control algorithms via digital controllers. An in-depth approach has been taken to describe the modeling of structures for control design, the development of control algorithms suitable for structural control, and the implementation of control algorithms by means of Simulink block diagrams or C language. Details of currently available actuators and sensors and electronic circuits for signal conditioning and filtering have been provided based on the most recent advances in the field. The book is used as a textbook for students and a reference for researchers who are interested in studying cutting-edge technology. It will be a valuable resource for academic and industrial researchers and professionals involved in the design and manufacture of active vibration controllers for structures in a wide variety of fields and industries including the automotive, rail, aerospace, and civil engineering sectors.

Download or read book Passive and Active Structural Vibration Control in Civil Engineering written by T.T. Soong and published by Springer. This book was released on 2014-05-04 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Base isolation, passive energy dissipation and active control represent three innovative technologies for protection of structures under environmental loads. Increasingly, they are being applied to the design of new structures or to the retrofit of existing structures against wind, earthquakes and other external loads. This book, with contributions from leading researchers from Japan, Europe, and the United States, presents a balanced view of current research and world-wide development in this exciting and fast expanding field. Basic principles as well as practical design and implementational issues associated with the application of base isolation systems and passive and active control devices to civil engineering structures are carefully addressed. Examples of structural applications are presented and extensively discussed.

Download or read book Active and Passive Vibration Damping written by Amr M. Baz and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the application of viscoelastic damping materials to control vibration and noise of structures, machinery, and vehicles Active and Passive Vibration Damping is a practical guide to the application of passive as well as actively treated viscoelastic damping materials to control vibration and noise of structures, machinery and vehicles. The author — a noted expert on the topic — presents the basic principles and reviews the potential applications of passive and active vibration damping technologies. The text presents a combination of the associated physical fundamentals, governing theories and the optimal design strategies of various configurations of vibration damping treatments. The text presents the basics of various damping effective treatments such as constrained layers, shunted piezoelectric treatments, electromagnetic and shape memory fibers. Classical and new models are included as well as aspects of viscoelastic materials models that are analyzed from the experimental characterization of the material coefficients as well as their modeling. The use of smart materials to augment the vibration damping of passive treatments is pursued in depth throughout the book. This vital guide: Contains numerical examples that reinforce the understanding of the theories presented Offers an authoritative text from an internationally recognized authority and pioneer on the subject Presents, in one volume, comprehensive coverage of the topic that is not available elsewhere Presents a mix of the associated physical fundamentals, governing theories and optimal design strategies of various configurations of vibration damping treatments Written for researchers in vibration damping and research, engineers in structural dynamics and practicing engineers, Active and Passive Vibration Damping offers a hands-on resource for applying passive as well as actively treated viscoelastic damping materials to control vibration and noise of structures, machinery and vehicles.

Download or read book Active and Passive Vibration Control of Structures written by Peter Hagedorn and published by Springer. This book was released on 2014-10-20 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Active and Passive Vibration Control of Structures form an issue of very actual interest in many different fields of engineering, for example in the automotive and aerospace industry, in precision engineering (e.g. in large telescopes), and also in civil engineering. The papers in this volume bring together engineers of different background, and it fill gaps between structural mechanics, vibrations and modern control theory. Also links between the different applications in structural control are shown.

Download or read book Vibration Theory and Applications with Finite Elements and Active Vibration Control written by Alan Palazzolo and published by John Wiley & Sons. This book was released on 2016-01-11 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on many years of research and teaching, this book brings together all the important topics in linear vibration theory, including failure models, kinematics and modeling, unstable vibrating systems, rotordynamics, model reduction methods, and finite element methods utilizing truss, beam, membrane and solid elements. It also explores in detail active vibration control, instability and modal analysis. The book provides the modeling skills and knowledge required for modern engineering practice, plus the tools needed to identify, formulate and solve engineering problems effectively.

Download or read book Spatial Control of Vibration written by S. O. Reza Moheimani and published by World Scientific. This book was released on 2003 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration is a natural phenomenon that occurs in a variety of engineering systems. In many circumstances, vibration greatly affects the nature of engineering design as it often dictates limiting factors in the performance of the system. The conventional treatment is to redesign the system or to use passive damping. The former could be a costly exercise, while the latter is only effective at higher frequencies. Active control techniques have emerged as viable technologies to fill this low-frequency gap. This book is concerned with the study of feedback controllers for vibration control of flexible structures, with a view to minimizing vibration over the entire body of the structure.The book introduces a variety of flexible structures such as beams, strings, and plates with specific boundary conditions, and explains in detail how a spatially distributed model of such systems can be obtained. It addresses the problems of model reduction and model correction for spatially distributed systems of high orders, and goes on to extend robust control techniques such as H-infinity and H2 control design methodologies to spatially distributed systems arising in active vibration control problems. It also addresses other important topics, such as actuator and sensor placement for flexible systems, and system identification for flexible structures with irregular boundary conditions. The text contains numerous examples, and experimental results obtained from laboratory-level apparatus, with details of how similar test beds may be built.

Download or read book Vibration with Control written by Daniel J. Inman and published by John Wiley & Sons. This book was released on 2006-11-02 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers are becoming increasingly aware of the problems caused by vibration in engineering design, particularly in the areas of structural health monitoring and smart structures. Vibration is a constant problem as it can impair performance and lead to fatigue, damage and the failure of a structure. Control of vibration is a key factor in preventing such detrimental results. This book presents a homogenous treatment of vibration by including those factors from control that are relevant to modern vibration analysis, design and measurement. Vibration and control are established on a firm mathematical basis and the disciplines of vibration, control, linear algebra, matrix computations, and applied functional analysis are connected. Key Features: Assimilates the discipline of contemporary structural vibration with active control Introduces the use of Matlab into the solution of vibration and vibration control problems Provides a unique blend of practical and theoretical developments Contains examples and problems along with a solutions manual and power point presentations Vibration with Control is an essential text for practitioners, researchers, and graduate students as it can be used as a reference text for its complex chapters and topics, or in a tutorial setting for those improving their knowledge of vibration and learning about control for the first time. Whether or not you are familiar with vibration and control, this book is an excellent introduction to this emerging and increasingly important engineering discipline.

Download or read book Comprehensive Investigation on Active Passive Hybrid Isolation and Tunable Dynamic Vibration Absorption written by Fei Wang and published by Springer. This book was released on 2018-12-17 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses efforts to control the low-frequency vibration transmission of typical power equipment and pipeline systems of ships, exploring the use of active and passive hybrid vibration isolation and adjustable dynamic vibration absorption technologies. It also proposes an adaptive feed-forward control strategy and studies a distributed feed-forward control hardware system. In addition, the book presents a three-way dynamic vibration absorption theory used to design a pipeline-system adjustable dynamic vibration absorber, which offers a number of advantages, such as compact structure, easy assembly and disassembly, low power consumption, excellent vibration control effect and wide frequency band adjustable ability, etc. This book is a valuable resource for researchers and engineers in the fields of noise and vibration control, active control systems, active vibration isolation and adaptive dynamic vibration absorption.

Download or read book Model Predictive Vibration Control written by Gergely Takács and published by Springer Science & Business Media. This book was released on 2012-03-14 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time model predictive controller (MPC) implementation in active vibration control (AVC) is often rendered difficult by fast sampling speeds and extensive actuator-deformation asymmetry. If the control of lightly damped mechanical structures is assumed, the region of attraction containing the set of allowable initial conditions requires a large prediction horizon, making the already computationally demanding on-line process even more complex. Model Predictive Vibration Control provides insight into the predictive control of lightly damped vibrating structures by exploring computationally efficient algorithms which are capable of low frequency vibration control with guaranteed stability and constraint feasibility. In addition to a theoretical primer on active vibration damping and model predictive control, Model Predictive Vibration Control provides a guide through the necessary steps in understanding the founding ideas of predictive control applied in AVC such as: · the implementation of computationally efficient algorithms · control strategies in simulation and experiment and · typical hardware requirements for piezoceramics actuated smart structures. The use of a simple laboratory model and inclusion of over 170 illustrations provides readers with clear and methodical explanations, making Model Predictive Vibration Control the ideal support material for graduates, researchers and industrial practitioners with an interest in efficient predictive control to be utilized in active vibration attenuation.

Download or read book Control of Noise and Structural Vibration written by Qibo Mao and published by Springer Science & Business Media. This book was released on 2013-06-02 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Noise and Structural Vibration presents a MATLAB®-based approach to solving the problems of undesirable noise generation and transmission by structures and of undesirable vibration within structures in response to environmental or operational forces. The fundamentals of acoustics, vibration and coupling between vibrating structures and the sound fields they generate are introduced including a discussion of the finite element method for vibration analysis. Following this, the treatment of sound and vibration control begins, illustrated by example systems such as beams, plates and double walls. Sensor and actuator placement is explained as is the idea of modal sensor–actuators. The design of appropriate feedback systems includes consideration of basic stability criteria and robust active structural acoustic control. Positive position feedback (PPF) and multimode control are also described in the context of loudspeaker–duct and loudspeaker–microphone models. The design of various components is detailed including the analog circuit for PPF, adaptive (semi-active) Helmholtz resonators and shunt piezoelectric circuits for noise and vibration suppression. The text makes extensive use of MATLAB® examples and these can be simulated using files available for download from the book’s webpage at springer.com. End-of-chapter exercises will help readers to assimilate the material as they progress through the book. Control of Noise and Structural Vibration will be of considerable interest to the student of vibration and noise control and also to academic researchers working in the field. It’s tutorial features will help practitioners who wish to update their knowledge with self-study.

Download or read book Vibration Control for Building Structures written by Aiqun Li and published by Springer Nature. This book was released on 2020-03-11 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive introduction to the field of structural vibration reduction control, but may also be used as a reference source for more advanced topics. The content is divided into four main parts: the basic principles of structural vibration reduction control, structural vibration reduction devices, structural vibration reduction design methods, and structural vibration reduction engineering practices. As the book strikes a balance between theoretical and practical aspects, it will appeal to researchers and practicing engineers alike, as well as graduate students.

Download or read book Vibration Analysis and Control in Mechanical Structures and Wind Energy Conversion Systems written by Francisco Beltran-Carbajal and published by BoD – Books on Demand. This book was released on 2018-04-18 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on recent and innovative methods on vibration analysis, system identification, and diverse control design methods for both wind energy conversion systems and vibrating systems. Advances on both theoretical and experimental studies about analysis and control of oscillating systems in several engineering disciplines are discussed. Various control devices are synthesized and implemented for vibration attenuation tasks. The book is addressed to researchers and practitioners on the subject, as well as undergraduate and postgraduate students and other experts and newcomers seeking more information about the state of the art, new challenges, innovative solutions, and new trends and developments in these areas. The six chapters of the book cover a wide range of interesting issues related to modeling, vibration control, parameter identification, active vehicle suspensions, tuned vibration absorbers, electronically controlled wind energy conversion systems, and other relevant case studies.

Download or read book Motion and Vibration Control written by Heinz Ulbrich and published by Springer Science & Business Media. This book was released on 2008-12-23 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion and vibration control is a fundamental technology for the development of advanced mechanical systems such as mechatronics, vehicle systems, robots, spacecraft, and rotating machinery. Often the implementation of high performance, low power consumption designs is only possible with the use of this technology. It is also vital to the mitigation of natural hazards for large structures such as high-rise buildings and tall bridges, and to the application of flexible structures such as space stations and satellites. Recent innovations in relevant hardware, sensors, actuators, and software have facilitated new research in this area. This book deals with the interdisciplinary aspects of emerging technologies of motion and vibration control for mechanical, civil and aerospace systems. It covers a broad range of applications (e.g. vehicle dynamics, actuators, rotor dynamics, biologically inspired mechanics, humanoid robot dynamics and control, etc.) and also provides advances in the field of fundamental research e.g. control of fluid/structure integration, nonlinear control theory, etc. Each of the contributors is a recognised specialist in his field, and this gives the book relevance and authority in a wide range of areas.

Download or read book Piezoelectric Transducers for Vibration Control and Damping written by S.O. Reza Moheimani and published by Springer Science & Business Media. This book was released on 2006-06-29 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent developments in vibration control systems that employ embedded piezoelectric sensors and actuators, reviewing ways in which active vibration control systems can be designed for piezoelectric laminated structures, paying distinct attention to how such control systems can be implemented in real time. Includes numerous examples and experimental results obtained from laboratory-scale apparatus, with details of how similar setups can be built.