Download or read book RF and Microwave Passive and Active Technologies written by Mike Golio and published by CRC Press. This book was released on 2018-10-03 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the high frequency world, the passive technologies required to realize RF and microwave functionality present distinctive challenges. SAW filters, dielectric resonators, MEMS, and waveguide do not have counterparts in the low frequency or digital environment. Even when conventional lumped components can be used in high frequency applications, their behavior does not resemble that observed at lower frequencies. RF and Microwave Passive and Active Technologies provides detailed information about a wide range of component technologies used in modern RF and microwave systems. Updated chapters include new material on such technologies as MEMS, device packaging, surface acoustic wave (SAW) filters, bipolar junction and heterojunction transistors, and high mobility electron transistors (HMETs). The book also features a completely rewritten section on wide bandgap transistors.
Download or read book Nonlinear Microwave and RF Circuits written by Stephen A. Maas and published by Artech House. This book was released on 2003 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly and thoroughly revised edition of the 1988 Artech House classic offers you a comprehensive, up-to-date treatment of nonlinear microwave and RF circuits. It gives you a current, in-depth understanding of the theory of nonlinear circuit analysis with a focus on Volterra-series and harmonic-balance methods. You get practical guidance in designing nonlinear circuits and modeling solid-state devices for nonlinear circuit analysis by computer. Moreover, you learn how characteristics of such models affect the analysis of these circuits. Critical new topics include microwave heterojunction bipolar transistors (HBTs), heterojunction FETs (HEMTs), silicon MOSFETs, modern IC design approaches, new methods of harmonic-balance analysis, multitone analysis methods, Fourier methods for multitone problems, and artificial frequency mapping. What's more, the second edition has been updated to include discussions on nonlinear analysis of oscillators and design issues relating to RF and wireless technology. More than 120 illustrations support key topics throughout the book.
Download or read book Handbook of RF Microwave and Millimeter wave Components written by Leonid A. Belov and published by Artech House. This book was released on 2012 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and comprehensive resource offers you a detailed treatment of the operations principles, key parameters, and specific characteristics of active and passive RF, microwave, and millimeter-wave components. The book covers both linear and nonlinear components that are used in a wide range of application areas, from communications and information sciences, to avionics, space, and military engineering. This practical book presents descriptions and clear examples and of the best materials and products used in the field, including laminates, prepregs, substrates; microstrip, coaxial and waveguide transmission lines; fixed and rotating connectors; matching and adjusting elements; frequency filters; phase shifters; and ferrite gates and circulators. Moreover, the book offers you in-depth discussions on microwave switches and matrices, including MEMS technology, solid state and vacuum amplifiers, mixers, modulators and demodulators, and oscillation sources. You also find coverage of the stable frequency synthesizer structure and sources of modulated or noisy signals. Greatly adding to the usefulness of this volume is the inclusion of more than 700 Internet addresses of manufacturers from across the globe.
Download or read book Principles of RF and Microwave Design written by Matthew A. Morgan and published by Artech House. This book was released on 2019-11-30 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource provides a thorough introduction to the principles of electronic circuits operating in the radio, microwave, and millimeter-wave frequency ranges. The book highlights the fundamental physical laws of classical electromagnetics using a foundation of Maxwell’s equations to give insight into the operating principles of circuit elements of all kinds, from lumped elements to transmission lines, waveguides, optical fibers, and quasi-optical structures. Standard passive system components like filters, splitters, couplers, hybrids, baluns, and antennas are explained to acclimate the reader to considering multiple technological solutions for common design problems. A basic overview of active circuit designs, such as amplifiers, mixers, and multipliers is also provided, along with discussion of the performance characteristics of electronic systems, including noise and linearity. Emphasis is placed on visualization and understanding of how and why electronic circuits of all frequencies are built and operate the way they do. Readers learn how to match an amplifier for optimum noise performance over the broadest bandwidth with the fewest number of elements and how to visualize the coupling of various modes in a mixed waveguide-type structure and avoid resonances due to trapped, higher-order modes. The book provides the tools needed to design and optimize a launcher from microstrip into waveguide, and whether the best characteristics can be achieved by incorporating matching elements in the microstrip section, the waveguide section, or both. Packed with references and examples, readers learn not only how to do the math but what the math means.
Download or read book Active and Passive RF and Microwave Frequency Multipliers written by Donald Thomas Jr. Gonzelas and published by . This book was released on 1998 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lumped Elements for RF and Microwave Circuits Second Edition written by Inder J. Bahl and published by Artech House. This book was released on 2022-12-31 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated and including entirely new chapters, this Second Edition provides in-depth coverage of the different types of RF and microwave circuit elements, including inductors, capacitors, resistors, transformers, via holes, airbridges, and crossovers. Featuring extensive formulas for lumped elements, design trade-offs, and an updated and current list of references, the book helps you understand the value and usefulness of lumped elements in the design of RF, microwave and millimeter wave components and circuits. You’ll find a balanced treatment between standalone lumped elements and their circuits using MICs, MMICs and RFICs technologies. You’ll also find detailed information on a broader range RFICs that was not available when the popular first edition was published. The book captures – in one consolidated volume -- the fundamentals, equations, modeling, examples, references and overall procedures to design, test and produce microwave components that are indispensable in industry and academia today. With its superb organization and expanded coverage of the subject, this is a must-have, go-to resource for practicing engineers and researchers in industry, government and university and microwave engineers working in the antenna area. Students will also find it a useful reference with its clear explanations, many examples and practical modeling guidelines.
Download or read book Wideband RF Technologies and Antennas in Microwave Frequencies written by Dr. Albert Sabban and published by John Wiley & Sons. This book was released on 2016-06-10 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents wideband RF technologies and antennas in the microwave band and millimeter-wave band This book provides an up-to-date introduction to the technologies, design, and test procedures of RF components and systems at microwave frequencies. The book begins with a review of the elementary electromagnetics and antenna topics needed for students and engineers with no basic background in electromagnetic and antenna theory. These introductory chapters will allow readers to study and understand the basic design principles and features of RF and communication systems for communications and medical applications. After this introduction, the author examines MIC, MMIC, MEMS, and LTCC technologies. The text will also present information on meta-materials, design of microwave and mm wave systems, along with a look at microwave and mm wave receivers, transmitters and antennas. Discusses printed antennas for wireless communication systems and wearable antennas for communications and medical applications Presents design considerations with both computed and measured results of RF communication modules and CAD tools Includes end-of-chapter problems and exercises Wideband RF Technologies and Antennas in Microwave Frequencies is designed to help electrical engineers and undergraduate students to understand basic communication and RF systems definition, electromagnetic and antennas theory and fundamentals with minimum integral and differential equations. Albert Sabban, PhD, is a Senior Researcher and Lecturer at Ort Braude College Karmiel Israel. Dr. Sabban was RF and antenna specialist at communication and Biomedical Hi-tech Companies. He designed wearable compact antennas to medical systems. From 1976 to 2007, Dr. Albert Sabban worked as a senior R&D scientist and project leader in RAFAEL.
Download or read book Modern RF and Microwave Measurement Techniques written by Valeria Teppati and published by Cambridge University Press. This book was released on 2013-06-20 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, hands-on review of the most up-to-date techniques in RF and microwave measurement combines microwave circuit theory and metrology, in-depth analysis of advanced modern instrumentation, methods and systems, and practical advice for professional RF and microwave engineers and researchers. Topics covered include microwave instrumentation, such as network analyzers, real-time spectrum analyzers and microwave synthesizers; linear measurements, such as VNA calibrations, noise figure measurements, time domain reflectometry and multiport measurements; and non-linear measurements, such as load- and source-pull techniques, broadband signal measurements, and non-linear NVAs. Each technique is discussed in detail and accompanied by state-of-the-art solutions to the unique technical challenges associated with its use. With each chapter written by internationally recognised experts in the field, this is an invaluable resource for researchers and professionals involved with microwave measurements.
Download or read book The RF and Microwave Handbook 3 Volume Set written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 2208 pages. Available in PDF, EPUB and Kindle. Book excerpt: By 1990 the wireless revolution had begun. In late 2000, Mike Golio gave the world a significant tool to use in this revolution: The RF and Microwave Handbook. Since then, wireless technology spread across the globe with unprecedented speed, fueled by 3G and 4G mobile technology and the proliferation of wireless LANs. Updated to reflect this tremendous growth, the second edition of this widely embraced, bestselling handbook divides its coverage conveniently into a set of three books, each focused on a particular aspect of the technology. Six new chapters cover WiMAX, broadband cable, bit error ratio (BER) testing, high-power PAs (power amplifiers), heterojunction bipolar transistors (HBTs), as well as an overview of microwave engineering. Over 100 contributors, with diverse backgrounds in academic, industrial, government, manufacturing, design, and research reflect the breadth and depth of the field. This eclectic mix of contributors ensures that the coverage balances fundamental technical issues with the important business and marketing constraints that define commercial RF and microwave engineering. Focused chapters filled with formulas, charts, graphs, diagrams, and tables make the information easy to locate and apply to practical cases. The new format, three tightly focused volumes, provides not only increased information but also ease of use. You can find the information you need quickly, without wading through material you don’t immediately need, giving you access to the caliber of data you have come to expect in a much more user-friendly format.
Download or read book Microwave Electronics written by Giovanni Ghione and published by Cambridge University Press. This book was released on 2018 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: A self-contained guide to microwave electronics, covering passive and active components, linear, low-noise and power amplifiers, microwave measurements, and CAD techniques. It is the ideal text for graduate and senior undergraduate students taking courses in microwave and radio-frequency electronics, as well as professional microwave engineers.
Download or read book RF and Microwave Power Amplifier Design written by Andrei Grebennikov and published by McGraw Hill Professional. This book was released on 2004-09-15 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a rigorous tutorial on radio frequency and microwave power amplifier design, teaching the circuit design techniques that form the microelectronic backbones of modern wireless communications systems. Suitable for self-study, corporate training, or Senior/Graduate classroom use, the book combines analytical calculations and computer-aided design techniques to arm electronic engineers with every possible method to improve their designs and shorten their design time cycles.
Download or read book The RF and Microwave Handbook written by Mike Golio and published by CRC Press. This book was released on 2000-12-20 with total page 1377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent shift in focus from defense and government work to commercial wireless efforts has caused the job of the typical microwave engineer to change dramatically. The modern microwave and RF engineer is expected to know customer expectations, market trends, manufacturing technologies, and factory models to a degree that is unprecedented in the
Download or read book Microwave Active Circuit Analysis and Design written by Clive Poole and published by Academic Press. This book was released on 2015-11-03 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the skills and knowledge required by today's RF and microwave engineer in a concise, structured and systematic way. Reflecting modern developments in the field, this book focuses on active circuit design covering the latest devices and design techniques. From electromagnetic and transmission line theory and S-parameters through to amplifier and oscillator design, techniques for low noise and broadband design; This book focuses on analysis and design including up to date material on MMIC design techniques. With this book you will: - Learn the basics of RF and microwave circuit analysis and design, with an emphasis on active circuits, and become familiar with the operating principles of the most common active system building blocks such as amplifiers, oscillators and mixers - Be able to design transistor-based amplifiers, oscillators and mixers by means of basic design methodologies - Be able to apply established graphical design tools, such as the Smith chart and feedback mappings, to the design RF and microwave active circuits - Acquire a set of basic design skills and useful tools that can be employed without recourse to complex computer aided design - Structured in the form of modular chapters, each covering a specific topic in a concise form suitable for delivery in a single lecture - Emphasis on clear explanation and a step-by-step approach that aims to help students to easily grasp complex concepts - Contains tutorial questions and problems allowing readers to test their knowledge - An accompanying website containing supporting material in the form of slides and software (MATLAB) listings - Unique material on negative resistance oscillator design, noise analysis and three-port design techniques - Covers the latest developments in microwave active circuit design with new approaches that are not covered elsewhere
Download or read book Radio Engineering for Wireless Communication and Sensor Applications written by Antti V. Räisänen and published by Artech House. This book was released on 2003 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of application areas, from wireless communications and navigation, to sensors and radar, this practical resource offers you the first comprehensive, multidisciplinary overview of radio engineering. You learn important techniques to help you with the generation, control, detection and utilization of radio waves, and find detailed guidance in radio link, amplifier, and antenna design. The book approaches relevant problems from both electromagnetic theory based on MaxwellOCOs equations and circuit theory based on KirchoffOCOs and OhmOCOs laws, including brief introductions to each theory."
Download or read book RF Technologies for Low Power Wireless Communications written by Tatsuo Itoh and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of microwave technology tailored for professionals in wireless communications RF Technologies for Low Power Wireless Communications updates recent developments in wireless communications from a hardware design standpoint and offers specialized coverage of microwave technology with a focus on the low power wireless units required in modern wireless systems. It explores results of recent research that focused on a holistic, integrated approach to the topics of materials, devices, circuits, modulation, and architectures rather than the more traditional approach of research into isolated topical areas. Twelve chapters deal with various fundamental research aspects of low power wireless electronics written by world-class experts in each field. The first chapter offers an overview of wireless architecture and performance, followed by detailed coverage of: Advanced GaAs-based HBT designs InP-based devices and circuits Si/SiGe HBT technology Noise in GaN devices Power amplifier architectures and nonlinearities Planar-oriented components MEMS and micromachined components Resonators, filters, and low-noise oscillators Antennas Transceiver front-end architectures With a clear focus and expert contributors, RF Technologies for Low Power Wireless Communications will be of interest to a wide range of electrical engineering disciplines working in wireless technologies.
Download or read book Electronic Engineers Master Catalog written by and published by . This book was released on 1993 with total page 2062 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radio Frequency Micromachined Switches Switching Networks and Phase Shifters written by Shiban Kishen Koul and published by CRC Press. This book was released on 2019-05-03 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Frequency Micromachined Switches, Switching Networks, and Phase Shifters discusses radio frequency microelectromechanical systems (RF MEMS)-based control components and will be useful for researchers and R&D engineers. It offers an in-depth study, performance analysis, and extensive characterization on micromachined switches and phase shifters. The reader will learn about basic design methodology and techniques to carry out extensive measurements on MEMS switches and phase shifters which include electrical, mechanical, power handling, linearity, temperature stability, reliability, and radio frequency performance. Practical examples included in the book will help readers to build high performance systems/subsystems using micromachined circuits. Key Features Provides simple design methodology of MEMS switches and switching networks including SPST to SP16T switches Gives an in-depth performance study of micromachined phase shifters. Detailed study on reliability and power handling capability of RF MEMS switches and phase shifters presented Proposes reconfigurable micromachined phase shifters Verifies a variety of MEMS switches and phase shifters experimentally
