Download or read book Active Aeroelastic Tailoring of High Aspect Ratio Composite Wings written by and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the proposed work is to study the fundamental mechanisms of active aeroelastic tailoring of high-aspect-ratio composite wings. The emphasis will be on actively exploring structural flexibility to enhance flight performance and reduce structural weight, while controlling aeroelastic instabilities. To investigate the effects of distributed anisotropic strain actuation and their synergism with the passive aeroelastic tailored composite structure, a suitable nonlinear active aeroelastic framework is required. Therefore, an analysis and design tool is being developed for high aspect ratio active flexible wings. The formulation is capable of modeling the nonlinear large deflection behavior of the wings, deformation due to applied voltages on the active plies in the skin of the wing, and the unsteady subsonic aerodynamic forces acting on the wing. Because the wing is long and slender, it can be reasonably well modeled as a beam undergoing three dimensional displacements and rotations. The cross sectional stiffness, inertia, and actuation properties of the wing are calculated along the span, and then a 1-d nonlinear beam model is constructed. This is a novel beam representation that is based on the beam curvatures, resulting in a computationally efficient low-order model suitable for preliminary structural design and control synthesis. Preliminary numerical results are presented in this report.

Download or read book The Aeroelastic Tailoring of a High Aspect ratio Composite Structure written by Taeke Nicolai Van den Bosch and published by . This book was released on 2014 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeroelastic Tailoring -- High aspect-ratio composite -- Wings -- Prepare cross-sectional geometry, material properties and layup orientation for VABS (PreVABS) -- Variational Asymptotic Beam Sectional Analysis (VABS) -- Geometrically exact beam theory (GEBT) -- Gliders -- 1D Beams -- 2D cross-sections -- Beam Theory -- Flaps -- Flaperons -- Ailerons -- Variational Asymptotic Beam -- Experimental setup -- Bend-twist couple -- Matlab.

Download or read book Performance Improvement of Composite Wings Through Aeroelastic Tailoring and Modern Control written by and published by . This book was released on 1995 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research has been carried out simultaneously on three aspects of aircraft wings performance optimization, as follows: (1) Structural tailoring and modern control of thin-walled model of composite aircraft wings; (2) Structural tailoring of a low-aspect ratio plate model of composite aircraft wings; and (3) Integrated structural design and vibration control by multiobjective optimization. Significant progress has been made on all fronts.

Download or read book Sixth International Conference on Nonlinear Mechanics ICNM 6 written by Zhe-wei Zhou and published by DEStech Publications, Inc. This book was released on 2013-08-30 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel mathematical and modeling approaches to problems in graded materials, biological materials, fluid mechanics and more Covers nanomechanics, multi-scale modeling, interface mechanics and microstructure This series volume contains 128 not previously published research presentations on using nonlinear mechanics to understand and model a wide variety of materials, including polymers, metals and composites, as well as subcellular and cellular tissues. Focus is on numerical and physics approaches to representing multiscale relationships within complex solids and fluids systems, with applications in materials science, energy storage, medical diagnostics and treatment, and biotechnology. TABLE OF CONTENTS Preface Committees SESSION 1: INVITED LECTURES Micro-Macro Analysis of Creep and Damage Behavior of Multi-Pass Welds Some New Developments in Non-Linear Solid Mechanics Design of Material Systems: Mathematics and Physics of the Archetype-Genome Exemplar Criticism of Generally Accepted Fundamentals and Methodologies of Traffic and Transportation Theory SESSION 2: NONLINEAR CONTINUUM MECHANICS Geometrically Nonlinear Analysis of Simple Plane Frames of Functionally Graded Materials Thermal Post-Buckling of FG Circular Plates Under Transversely Point-Space Constraint Tunability of Longitudinal Wave Band Gap in One Dimensional Magneto-Elastic Phononic Crystal Teaching Nonlinear Mechanics at the Undergraduate and Graduate Level—Two Examples Geometrically Nonlinear FE Instability Simulations of Hinged Composite Laminated Cylindrical Shells Constitutive Relation of Martensitic Transformation in CuAlNi Based on Atomistic Simulations Soft Behaviors of Beam Shaped Liquid Crystal Elastomers Under Light Actuations XFEM Based Discontinuity Simulation for Saturated Soil Numerical Algorithm of Solving the Problem of Large Elastic-Plastic Deformation by FEM Finite Deformation for Everted Compressible Hypereleastic Cylindrical Tubes Modelling and Non-Linear Free Vibrations of Cable-Stayed Beam Wavelet Solution of a Class of Nonlinear Boundary Value Problems Axial Compression of a Rectangular Rubber Ring Composed of an Incompressible Mooney-Rivlin Material Influence of Concentration-Dependent Elastic Modulus and Charge or Discharge Rate on Tensile Stress in Anode An Integral Equation Approach to the Fully Nonlinear Fluid Flow Problem in an Infinite Channel Over Arbitrary Bottom Topography Analysis of Nonlinear Dynamical Characteristics for Thermoelastic Half-Plane with Voids Tensor Model for Dynamic Damage of Ductile Metals Over a Wide Range of Strain Rates SESSION 3: MULTI-SCALE MECHANICS AND MULTI-PHYSICS MODELING The Nonlinear Magnetoelectric Effect of Layered Magnetoelectric Composite Cylinder with an Imperfect Interface A Solution for Nonlinear Poisson-Neumann Problem of Nb3Sn Superconducting Transport Current Temperature Effect on the Tensile Mechanical Properties of Graphene Nanoribbons Square Inclusion with a Nonlinear Eigenstrain in an Anisotropic Piezoelectric Full Plane Nonlinear Analysis of the Threaded Connection with Three-Dimensional Finite Element Model Effects of Particle Volume Fraction on the Macro-Thermo-Mechanical Behaviors in Plate-Type Dispersion Nuclear Fuel Elements Mechanics of Semiflexible Polymer Chains Under Confinements Study on the Solution of Reynolds Equation for Micro Gas Bearings Using the Alternating-Direction Implication Algorithm Atomistic Study of Li Concentration Dependence of the Mechanical Properties of Graphite Anode in Li-ion Battery 3D Extrusion Simulation of the Single Screw Head and Optimization Design Buckling Behavior of Defective Carbon Nanotubes Elastic Properties of Single-Stranded DNA Biofilm with Strong Interactions Analysis on Thickness Dependence of Jc Caused by Dislocations and Grain Boundaries in YBCO Superconducting Films Operating Strain Response in CICC Coils Through Nonlinear Finite Element Modeling Dynamics Analysis of a Multi-Degree-of-Freedom Electro-Hydraulic Mix-Drive Motion Simulator by KANE Equation Multiscale 3D Fracture Simulation Integrating Tomographic Characterization Research into Compressive Mechanical Properties of Special Piezomagnetic Material Sheets A Numerical Study on Detonation Wave Propagation Using High-Precision and High-Resolution Schemes SESSION 4: STRUCTURAL DYNAMIC AND STRUCTURE-FLUID INTERACTIONS A Study on Pure IL VIV of a Marine Riser in Shear Current Parametric Studies on Nonlinear Flutter of High-Aspect-Ratio Flexible Wings Model Reduction of a Flexible Beam Rotating at High Speed Considering Dynamic Stiffening Vibration Modal Analysis of Cantilever Beams with Complicated Elasticity Boundary Constraint Numerical Simulation of Ahmed Model in Consideration of the FSI Effect Aerodynamic Damping of a Hammerhead Launch Vehicle in Transonic Flow Symmetry Reductions and Explicit Solutions of (3 + 1)-Dimensional Kadomtsev-Petviashvili (KP) Equation Nonlinear Behaviors of an Isotropic Incompressible Hyperelastic Spherical Membrane Under Different Dynamic Loads Creep Buckling of Viscoelastic Plate Consdering Higher Order Modes SESSION 5: COMPLEX FLUID FLOW AND NONLINEAR STABILITY Homotopy Analysis of Korteweg-de Vries Equation with Time Delay Homotopy Analysis Method for Bubble Pulsation Equation with Nonlinear Term of Fractional Power Chebyshev Finite Spectral Method for Boussinesq-Type Equations on Staggered Grids Twin Jets in Crossflow Application of Fixed Point Method to Obtain a Semi-Analytical Solution of Stagnation Flow On the Nonlinear Stability of Laminar Flow Between Parallel Planes Boundary Treatments in Lattice Boltzmann Method A Lattice Boltzmann Based Immersed Boundary Method for Fluid-Structure Interaction Numerical Solutions of Convection-Diffusion Equations by Hybrid Discontinuous Galerkin Methods Steady-State Solutions of the Wave-Bottom Resonant Interaction Lattice Boltzmann Simulation of the Shock Damping and the Shock Increased by Means of Lorentz Force Analysis of the Effects of Nonlinear Characteristics of Lag Dampers on Helicopter Ground Resonance Flow Structures and Sound Radiation in Supersonic Mixing Layers with Nonlinear PSE Method Turbulent Structures in Subsonic Jet Flow Forced by Random Disturbances Exponential p-Stability for a Delayed Recurrent Neural Networks with Impulses Spatial Variation of Scaling Exponents for Structure Functions in a Decaying Turbulence SESSION 6: NONLINEAR DYNAMIC OF STRUCTURE Analysis of Chaos Behavior of Single Mode Vibration of Cable-Stayed Chaotification of Fractional Maps Nonlinear Finite Element Analysis of the Dynamic Axial Crushing of Empty Hexagonal Tube Active Control of a Nonlinear Aeroelastic System Using the Receptance Method Dynamics Analysis of the FHN Neuronal Model Analyzing the Effect of the Axial Force to the Natural Frequencies of Arch Stable Periodic Response of One-Way Clutches in a Two-Pulley Belt-Drive Model Supercritical Nonlinear Dynamics of an Axially Moving Viscoelastic Beam with Speed Fluctuation Nonlinear Dynamic Response to a Moving Force of Timoshenko Beams Resting on Pasternak Foundations An Improved Method for the Construction of Nonlinear Operator in Homotopy Analysis Method A Nonlinear Integration Scheme for Evolutionary Differential Equations A Comparative Study of Civil Aircraft Crashworthiness with Different Ground Conditions Improved Dynamic Analysis of Development of Pulmonary Edema The Timescale Function Method for Solving Free Vibration of Nonlinear Oscillator Nonlinear Aeroelastic Analysis of Flexible Wings with High-Aspect-Ratio Considering Large Deflection Differential Quadrature Method for Vibration Analysis of Finite Beams on Nonlinear Viscoelastic Foundations Numerical Simulation on the Strength and Sealing Performance for High-Pressure Isolating Flange Nonlinear Dynamical Stability of the Lattices with Initial Material and Geometric Imperfection Nonlinear Vibration of Symmetric Angle-Ply Laminated Piezoelectric Plates with Linearly Varying Thickness An Exact Free Vibration Frequency Formula for Oscillator with Single-Term Positive-Power Restoring Force An Exact Solution of Synchronization State for a Class of Networked Mass-Spring-Damper Oscillator Systems SESSION 7: INTERFACE MECHANICS AND ENGINEERING APPLICATION Numerical Simulation of Free Surface Collapse in Propellant Tank Restudy on the Adaptive Mesh Technique for Seepage Problems High-Order Series Solutions of Wave and Current Interactions Deformation and Stress Distribution of Arterial Walls of the Aged A p53-Mdm2 Dynamical Model Induced by Laminar Shear Stress in Endothelial Cells Optimized Image Processing Based on CUDA in a Combined Measurement Technique of PIV and Shadowgraph 3D Visualization of the Flow Fields Using Digital In-Line Holography Analysis and Experimental Study on Air Foam Flooding Seepage Flow Mechanics Experimental Measurements for Mechanical and Electrical Conductive Properties of CNT Bundles Analysis on Dynamic Response of Bedding Rock Slope with Bolts under Earthquakes Numerical Prediction of Aerodynamic Noise Radiated from High Speed Train Pantograph Effects of Length on Aerodynamics of High Speed Train Models Free Convection Nanofluid Flow in the Stagnation-Point Region of a Three Dimensional Body Vertical Distribution and Dynamic Release Characteristics of Pollutants from Resuspended Sediment Numerical Simulation of the Contaminant Release Through the Sediment-Overlying Water Interface Analysis on the Aerodynamic and Aero-Noise of MIRA Model Radial Squeeze Force of MR Fluid Between Two Cylinders Nonlinear Buckling Analysis and Ultimate Extended Capacity Research of Downhole Pipe Strings in Ultra-Deep Horizontal Wells A Novel Method of Generating Nonlinear Internal Wave in a Stratified Fluid Tank and Its Theoretical Model SESSION 8: MINI-SYMPOSIUM ON TRAFFIC FLUID Study on Correlation Analysis of Synchronized Flow in the Kerner-Klenov-Wolf Cellular Automation Model Numerical Simulation of Traffic Flow in the Rain or Snow Weather Condition First Order Phase Transitions in the Brake Light Cellular Automation Model Within the Fundamental Diagram Approach The Leader-Follower Winding Behavior of Pedestrians in a Queue Effect of Overpasses in Two-Dimensional Traffic Flow Model with Random Update Rule Analysis of the Density Wave in a New Continuum Model The Phenomenon of High-Speed-Car-Following on Chinese Highways A Lattice Hydrodynamic Model Considering the Difference of Density and its Analysis Experimental Feature of Car-Following Behaviors in a Platoon of 25 Vehicles Car-Following Model for Manual Transmission Vehicles The Mechanism of Synchronized Flow in Traffic Flow Modeling An Asymmetric Stochastic Car-Following Model Based on Extended Tau Theory A Gaussian Distribution Based Dual-Cognition Driver Behavior Model at Cross Traffic A New Traffic Kinetic Model Considering Potential Influence The Effect of Marks on the Pedestrian Evacuation Equilibrium Velocity Distribution Function for Traffic Flow Effects of Antilock Braking System on Driving Behavior Under Emergent Stability Analysis of Pedestrian Flow in Two-Dimensional Optimal Velocity Model with Asymmetric Interaction Simulation-Based Stability Analysis of Car-Following Models Under Heterogeneous Traffic Crossing Speed of Pedestrian at an Unsignalized Intersection Modeling Mixed Traffic Flow at a Crosswalk with Push Button Effects of Game Strategy Update on Pedestrian Evacuation in a Hall Study on Long-Term Correlation of CO and CO2 from Vehicle Emissions on Roadsides with the Detrended Fluctuation Analysis Method Bottleneck Effect on a Bidirectional Two-Lane Mixed Traffic Flow

Download or read book Design and Analysis of Composite Structures written by Christos Kassapoglou and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Composite Structures enables graduate students and engineers to generate meaningful and robust designs of complex composite structures. Combining analysis and design methods for structural components, the book begins with simple topics such as skins and stiffeners and progresses through to entire components of fuselages and wings. Starting with basic mathematical derivation followed by simplifications used in real-world design, Design and Analysis of Composite Structures presents the level of accuracy and range of applicability of each method. Examples taken from actual applications are worked out in detail to show how the concepts are applied, solving the same design problem with different methods based on different drivers (e.g. cost or weight) to show how the final configuration changes as the requirements and approach change. Provides a toolkit of analysis and design methods to most situations encountered in practice, as well as analytical frameworks and the means to solving them for tackling less frequent problems. Presents solutions applicable to optimization schemes without having to run finite element models at each iteration, speeding up the design process and allowing examination of several more alternatives than traditional approaches. Includes guidelines showing how decisions based on manufacturing considerations affect weight and how weight optimization may adversely affect the cost. Accompanied by a website at www.wiley.com/go/kassapoglou hosting lecture slides and solutions to the exercises for instructors.

Download or read book Introduction to Aircraft Aeroelasticity and Loads written by Jan Robert Wright and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeroelastic phenomena arising from the interaction of aerodynamic, elastic and inertia forces, and the loads resulting from flight / ground manoeuvres and gust / turbulence encounters, have a significant influence upon aircraft design. The prediction of aircraft aeroelastic stability, response and loads requires application of a range of interrelated engineering disciplines. This new textbook introduces the foundations of aeroelasticity and loads for the flexible aircraft, providing an understanding of the main concepts involved and relating them to aircraft behaviour and industrial practice. This book includes the use of simplified mathematical models to demonstrate key aeroelastic and loads phenomena including flutter, divergence, control effectiveness and the response and loads resulting from flight / ground manoeuvres and gust / turbulence encounters. It provides an introduction to some up-to-date methodologies for aeroelastics and loads modelling. It lays emphasis on the strong link between aeroelasticity and loads. It also includes provision of MATLAB and SIMULINK programs for the simplified analyses. It offers an overview of typical industrial practice in meeting certification requirements.

Download or read book Commercial Aircraft Composite Technology written by Ulf Paul Breuer and published by Springer. This book was released on 2016-05-10 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on lectures held at the faculty of mechanical engineering at the Technical University of Kaiserslautern. The focus is on the central theme of societies overall aircraft requirements to specific material requirements and highlights the most important advantages and challenges of carbon fiber reinforced plastics (CFRP) compared to conventional materials. As it is fundamental to decide on the right material at the right place early on the main activities and milestones of the development and certification process and the systematic of defining clear requirements are discussed. The process of material qualification - verifying material requirements is explained in detail. All state-of-the-art composite manufacturing technologies are described, including changes and complemented by examples, and their improvement potential for future applications is discussed. Tangible case studies of high lift and wing structures emphasize the specific advantages and challenges of composite technology. Finally, latest R&D results are discussed, providing possible future solutions for key challenges such as low cost high performance materials, electrical function integration and morphing structures.

Download or read book Aeroelastic Tailoring of Composite Wings for Flutter and Divergence Control written by Sirri Oguz and published by . This book was released on 1994 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aeroelastic Tailoring of a Composite Wing with Adaptive Control Surfaces for Optimal Aircraft Performance written by Eduardo Krupa and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Manufacture of Structural Composites written by Lee Harper and published by Woodhead Publishing. This book was released on 2022-11-30 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture of Structural Composites provides an overview of the main manufacturing challenges encountered when processing fibre-reinforced composite materials. Composites are unique in that the material is created at the same time as the structure, forming a very close link between the constituents, the manufacturing process and the resulting mechanical performance. This book takes an in-depth look at material choices and the intermediate steps required to convert different fibre and matrix combinations into finished products. It provides an insight into recent developments for each of the manufacturing processes covered, addressing design, cost, rate and mechanical performance. Topics covered include an introduction to composite materials, material preforming and conversion, moulding, digital design and sustainability, which addresses waste reduction, disassembly and fibre recovery. This book has been developed primarily as a teaching resource with contributions from leading experts in the field. The content has evolved from courses given by the authors to mechanical engineering and materials science students, at both undergraduate and postgraduate levels. It also draws upon experience gained during research projects and from leading industry experts. It therefore provides non-specialists with a valuable introduction to composite manufacturing techniques, helping to determine the most suitable manufacturing routes and to understand the challenges associated with the production of high-performance composite components. Provides an overview of the most common manufacturing routes for fibre reinforced composites, including the influence of the manufacturing route on mechanical properties, production volume and component cost Discusses recent advances in composite manufacturing, including the use of automation, process simulation, digital factories, and solutions to improve sustainability Looks at where the composites sector is heading and discusses some of the challenges faced by end-users looking to scale up production and increase the uptake of fibre-reinforced composites for structural applications

Download or read book Modeling and Analysis Methodology for Aeroelastically Tailored Chordwise Deformable Wings written by and published by . This book was released on 1992 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aeroelastic Tailoring of Composite Aircraft Wings with Uncertainty Quantification for Robust and Reliable Design written by Muhammad F. B. Othman and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials and Structures ACEE written by and published by . This book was released on 1981 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Optimization of an Aeroelastically Tailored Composite Wing written by Abdolhamid Attaran and published by . This book was released on 2007 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effects of the aspect ratio, sweep angle, and stacking sequence of laminated composites were studied to find the optimized configuration of an aeroelasticity tailored composite wing idealized as a flat plate in terms of flutter speed. The aeroelastic analysis has been carried out in frequency-domain. The modal approach in conjunction with Doublet-lattice Method (DLM) has been opted for structural and unsteady aerodynamic boxes amd structural nodes has been using surface spline. To study the effect of stacking sequence the classical lamination theory (CLT) has been chosen. The parametric studies showed the effective ply orientation angle to be somewhere between 15 to 30 degree, while the plates with lower aspect ratio seems to have higher flutter speed. Forward-swept configurations show higher flutter speed, yer imposed by divergence constraint.

Download or read book Introduction to Nonlinear Aeroelasticity written by Grigorios Dimitriadis and published by John Wiley & Sons. This book was released on 2017-03-10 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Nonlinear Aeroelasticity Introduces the latest developments and technologies in the area of nonlinear aeroelasticity Nonlinear aeroelasticity has become an increasingly popular research area in recent years. There have been many driving forces behind this development, increasingly flexible structures, nonlinear control laws, materials with nonlinear characteristics and so on. Introduction to Nonlinear Aeroelasticity covers the theoretical basics in nonlinear aeroelasticity and applies the theory to practical problems. As nonlinear aeroelasticity is a combined topic, necessitating expertise from different areas, the book introduces methodologies from a variety of disciplines such as nonlinear dynamics, bifurcation analysis, unsteady aerodynamics, non-smooth systems and others. The emphasis throughout is on the practical application of the theories and methods, so as to enable the reader to apply their newly acquired knowledge Key features: Covers the major topics in nonlinear aeroelasticity, from the galloping of cables to supersonic panel flutter Discusses nonlinear dynamics, bifurcation analysis, numerical continuation, unsteady aerodynamics and non-smooth systems Considers the practical application of the theories and methods Covers nonlinear dynamics, bifurcation analysis and numerical methods Accompanied by a website hosting Matlab code Introduction to Nonlinear Aeroelasticity is a comprehensive reference for researchers and workers in industry and is also a useful introduction to the subject for graduate and undergraduate students across engineering disciplines.

Download or read book First A in NASA written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Transportation, Aviation, and Weather and published by . This book was released on 1978 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: