Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9

Download or read book Methods for Wastewater Characterization in Activated Sludge Modelling written by Henryk Melcer and published by IWA Publishing. This book was released on 2004-11-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.

Download or read book Biological Wastewater Treatment Principles Modeling and Design written by Guang-Hao Chen and published by IWA Publishing. This book was released on 2020-07-15 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book was published in 2008 and it went on to become IWA Publishing’s bestseller. Clearly there was a need for it because over the twenty years prior to 2008, the knowledge and understanding of wastewater treatment had advanced extensively and moved away from empirically-based approaches to a fundamental first-principles approach based on chemistry, microbiology, physical and bioprocess engineering, mathematics and modelling. However the quantity, complexity and diversity of these new developments was overwhelming for young water professionals, particularly in developing countries without readily available access to advanced-level tertiary education courses in wastewater treatment. For a whole new generation of young scientists and engineers entering the wastewater treatment profession, this book assembled and integrated the postgraduate course material of a dozen or so professors from research groups around the world who have made significant contributions to the advances in wastewater treatment. This material had matured to the degree that it had been codified into mathematical models for simulation with computers. The first edition of the book offered, that upon completion of an in-depth study of its contents, the modern approach of modelling and simulation in wastewater treatment plant design and operation could be embraced with deeper insight, advanced knowledge and greater confidence, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks, or biofilm systems. However, the advances and developments in wastewater treatment have accelerated over the past 12 years since publication of the first edition. While all the chapters of the first edition have been updated to accommodate these advances and developments, some, such as granular sludge, membrane bioreactors, sulphur conversion-based bioprocesses and biofilm reactors which were new in 2008, have matured into new industry approaches and are also now included in this second edition. The target readership of this second edition remains the young water professionals, who will still be active in the field of protecting our precious water resources long after the aging professors who are leading some of these advances have retired. The authors, all still active in the field, are aware that cleaning dirty water has become more complex but that it is even more urgent now than 12 years ago, and offer this second edition to help the young water professionals engage with the scientific and bioprocess engineering principles of wastewater treatment science and technology with deeper insight, advanced knowledge and greater confidence built on stronger competence.

Download or read book Wastewater Treatment and Reuse Theory and Design Examples Volume 1 written by Syed R. Qasim and published by CRC Press. This book was released on 2017-11-22 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will present the theory involved in wastewater treatment processes, define the important design parameters involved, and provide typical values of these parameters for ready reference; and also provide numerical applications and step-by-step calculation procedures in solved examples. These examples and solutions will help enhance the readers’ comprehension and deeper understanding of the basic concepts, and can be applied by plant designers to design various components of the treatment facilities. It will also examine the actual calculation steps in numerical examples, focusing on practical application of theory and principles into process and water treatment facility design.

Download or read book River Water Quality Model written by P. Reichert and published by IWA Publishing. This book was released on 2001-08-31 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Scientific and Technical Report (STR) presents the findings of the IWA Task Group on River Water Quality Modelling (RWQM). The task group was formed to create a scientific and technical base from which to formulate standardized, consistent river water quality models and guidelines for their implementation. This STR presents the first outcome in this effort: River Water Quality Model No. 1 (RWQM1). As background to the development of River Water Quality Model No.1, the Task Group completed a critical evaluation of the current state of the practice in water quality modelling. A major limitation in model formulation is the continued reliance on BOD as the primary state variable, despite the fact BOD does not include all biodegradable matter. A related difficulty is the poor representation of benthic flux terms. As a result of these limitations, it is impossible to close mass balances completely in most existing models. These various limitations in current river water quality models impair their predictive ability in situations of marked changes in a river's pollutant load, streamflow, morphometry, or other basic characteristics. RWQM 1 is intended to serve as a framework for river water quality models that overcome these deficiencies in traditional water quality models and most particularly the failure to close mass balances between the water column and sediment. To these ends, the model incorporates fundamental water quality components and processes to characterise carbon, oxygen, nitrogen, and phosphorus (C, O, N, and P) cycling instead of biochemical oxygen demand as used in traditional models. The model is presented in terms of process and components represented via a 'Petersen stoichiometry matrix', the same approach used for the IWA Activated Sludge Models. The full RWQM1 includes 24 components and 30 processes. The report provides detailed examples on reducing the numbers of components and processes to fit specific water quality problems. Thus, the model provides a framework for both complicated and simplified models. Detailed explanations of the model components, process equations, stoichiometric parameters, and kinetic parameters are provided, as are example parameter values and two case studies. The STR is intended to launch a participatory process of model development, application, and refinement. RWQM1 provides a framework for this process, but the goal of the Task Group is to involve water quality professionals worldwide in the continued work developing a new water quality modelling approach. This text will be an invaluable reference for researchers and graduate students specializing in water resources, hydrology, water quality, or environmental modelling in departments of environmental engineering, natural resources, civil engineering, chemical engineering, environmental sciences, and ecology. Water resources engineers, water quality engineers and technical specialists in environmental consultancy, government agencies or regulated industries will also value this critical assessment of the state of practice in water quality modelling. Key Features presents a unique new technical approach to river water quality modelling provides a detailed technical presentation of the RWQM1 water quality process model gives an informative critical evaluation of the state of the practice in water quality modelling, and problems with those practices provides a step by step procedure to develop a water quality model Scientific & Technical Report No. 12

Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.

Download or read book Instrumentation Control and Automation in Wastewater Systems written by Gustaf Olsson and published by IWA Publishing. This book was released on 2005-04-30 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation, control and automation (ICA) in wastewater treatment systems is now an established and recognised area of technology in the profession. There are obvious incentives for ICA, not the least from an economic point of view. Plants are also becoming increasingly complex which necessitates automation and control. Instrumentation, Control and Automation in Wastewater Systems summarizes the state-of-the-art of ICA and its application in wastewater treatment systems and focuses on how leading-edge technology is used for better operation. The book is written for: The practising process engineer and the operator, who wishes to get an updated picture of what is possible to implement in terms of ICA; The process designer, who needs to consider the couplings between design and operation; The researcher or the student, who wishes to get the latest technological overview of an increasingly complex field. There is a clear aim to present a practical ICA approach, based on a technical and economic platform. The economic benefit of different control and operation possibilities is quantified. The more qualitative benefits, such as better process understanding and more challenging work for the operator are also described. Several full-scale experiences of how ICA has improved economy, ease of operation and robustness of plant operation are presented. The book emphasizes both unit process control and plant wide operation. Scientific & Technical Report No. 15

Download or read book Urban Hydroinformatics written by Roland K. Price and published by IWA Publishing. This book was released on 2011 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to hydroinformatics applied to urban water management. It shows how to make the best use of information and communication technologies for manipulating information to manage water in the urban environment. The book covers the acquisition and analysis of data from urban water systems to instantiate mathematical models or calculations, which describe identified physical processes. The models are operated within prescribed management procedures to inform decision makers, who are responsible to recognized stakeholders. The application is to the major components of the urban water environment, namely water supply, treatment and distribution, wastewater and stormwater collection, treatment and impact on receiving waters, and groundwater and urban flooding. Urban Hydroinformatics pays particular attention to modeling, decision support through procedures, economics and management, and implementation in both developed and developing countries. The book is written with post-graduates, researchers and practicing engineers who are involved in urban water management and want to improve the scope and reliability of their systems.

Download or read book System Identification SYSID 03 written by Paul Van Den Hof and published by Elsevier. This book was released on 2004-06-29 with total page 2080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the symposium covers all major aspects of system identification, experimental modelling, signal processing and adaptive control, ranging from theoretical, methodological and scientific developments to a large variety of (engineering) application areas. It is the intention of the organizers to promote SYSID 2003 as a meeting place where scientists and engineers from several research communities can meet to discuss issues related to these areas. Relevant topics for the symposium program include: Identification of linear and multivariable systems, identification of nonlinear systems, including neural networks, identification of hybrid and distributed systems, Identification for control, experimental modelling in process control, vibration and modal analysis, model validation, monitoring and fault detection, signal processing and communication, parameter estimation and inverse modelling, statistical analysis and uncertainty bounding, adaptive control and data-based controller tuning, learning, data mining and Bayesian approaches, sequential Monte Carlo methods, including particle filtering, applications in process control systems, motion control systems, robotics, aerospace systems, bioengineering and medical systems, physical measurement systems, automotive systems, econometrics, transportation and communication systems *Provides the latest research on System Identification *Contains contributions written by experts in the field *Part of the IFAC Proceedings Series which provides a comprehensive overview of the major topics in control engineering.

Download or read book Large Scale Systems 2004 written by Masao Ikeda and published by Elsevier. This book was released on 2005-12-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solids in Sewers written by Richard M. Ashley and published by IWA Publishing. This book was released on 2004-04-30 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Report presents information on the current state of knowledge of the origins, occurrence, nature and effects of sewer solids for use by engineers, scientists, administrators and water quality planners for the planning, design and operation of sewerage systems. The report addresses both sewer maintenance requirements and environmental protection issues. Increasing environmental standards, coupled with public expectations, have led to stringent water quality standards. In response to this, it has been necessary to develop new methodologies and computer based analytical techniques to model and understand the performance of all aspects of waste water systems. Fundamental to these techniques is the understanding of the way in which sewer solids contribute to the poor performance of wastewater systems and consequential environmental damage. The information presented in this Report about the origins, nature, movement, hydraulic and polluting effects of solids in sewers has enabled strategies and rules to be developed for the management of sewerage systems to minimise the deleterious effects of these solids and associated pollutants. Scientific & Technical Report No. 14

Download or read book Resource Recovery from Wastewater written by Veera Gnaneswar Gude and published by CRC Press. This book was released on 2021-07-15 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative volume provides comprehensive knowledge on various aspects of wastewater resource management from the point of process sustainability and resource recovery. This authoritative compendium is crucial for developing resource-efficient and sustainable wastewater treatment technologies and management strategies for both small (decentralized) and large (centralized) communities. Traditional wastewater systems have become increasingly energy-consuming and cost-intensive while also not meeting the increasing standards for nutrient removal and sustainable development. This book incorporates the latest developments in pollutant removal and resource recovery schemes in wastewater treatment. It highlights advances that have been made in microbiological processes; design of treatment methods; process configurations; energy conservation and efficiency improvement schemes; nutrient removal; recovery, reclamation, and recycling; beneficial uses of wastewater; and bioenergy and biochemical production from wastewater and sludge streams. Waste-to-energy technologies, especially wastewater treatment as a potential biofuel energy alternative through bioelectrochemical and other processes, are also discussed in this book.

Download or read book The MBR Book written by Simon Judd and published by Elsevier. This book was released on 2010-11-26 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MBR Book covers all essential aspects of membrane bioreactors in water and wastewater treatment, including the working principles of MBR technologies. The book aims to separate science from engineering, in an attempt to avoid confusion and to help readers understand the ideas of MBR. The text is divided into five chapters; the membrane and biological aspects are discussed in chapter 2 along with scientific studies. The third chapter covers the design, operation, and maintenance of MBR, including cost modeling and cost benefit analysis. Chapters 4 and 5 cover the commercial MBR products and their applications for water and wastewater treatment, respectively. The text features industrial case studies, along with useful appendices of commercial and international membrane organizations. The book serves as a a primary reference for chemical, environmental, and process engineers, as well as environmental researchers, natural resources researchers, filtration specialists, water company managers, and consultants. - Membrane Bioreactors are a major growth area in the water and waste water treatment industries - Internationally-known author, one of the leading senior experts in MBR research - Principles and practice, backed by industrial case studies

Download or read book Environmental Biotechnology written by Zaini Ujang and published by IWA Publishing. This book was released on 2004-08-31 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IWA Conference on Environmental Biotechnology: Advancement in Water and Wastewater Application in the Tropics, held in Kuala Lumpur, Malaysia on 9-10 December 2003, was a peer-reviewed conference. It was specially organized for Malaysia and the Asia-Pacific region in collaboration between Universiti Teknologi Malaysia (UTM), the International Water Association (IWA), the Malaysia Water Association and the Malaysian Biotechnology Directorate. Papers presented in the conference covered current perspectives on the advancement of water and wastewater applications using environmental biotechnology, as well as methodologies, techniques, modelling, case studies, directions and other specific issues. The emphasis was also on its feasibility in developing countries. The conference also focussed on the biodegradation and bioconversion, health related microorganisms, microbial community structure and analysis, sludge reduction and material recovery, drinking water treatment and safety, nutrient removal and recovery, sensors, modelling and control, molecular techniques, integrated treatment concepts and biological nutrient removal for developing countries, particularly in the tropical region. Stock for this WEMS edition was damaged in transit to the IWA Publishing warehouse. A discount has therefore been applied to this title.

Download or read book Biomethanization of the Organic Fraction of Municipal Solid Wastes written by J. Mata-Alvarez and published by IWA Publishing. This book was released on 2002-08-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomethanization of the Organic Fraction of Municipal Solid Wastes is a comprehensive introduction to both the fundamentals and the more practical aspects of the anaerobic digestion of organic solid wastes, particularly those derived from households, that is, the organic fraction of municipal solid wastes (OFMSW). It can be used as a textbook for specialized courses and also as a guide for practitioners. In the first part, the book covers the relevant aspects of anaerobic digestion (AD) of organic wastes. The fundamentals and kinetic aspects of AD are reviewed with particular emphasis on the aspects related to solid wastes. This introduction is necessary to have a comprehensive view of the AD process and to understand the practical principles as well as the origin of possible problems arising from the management of the process. Chapter 2 emphasizes the role of kinetics in designing the reactor, paying special attention to existing models, particularly the dynamic ones. Through this introduction, it is intended to facilitate the technology transfer from laboratory or pilot plant experiences to full-scale process, in order to implement improvements in current digesters. Laboratory methods are described for the analysis and optimization of reactor performance, such as methanogenic activity tests or experimental evaluation of the biodegradation kinetics of solid organic waste. The different reaction patterns applied to industrial reactors are outlined. Industrial reactors are classified in accordance with the system they use, pointing out advantages and limitations. Co-digestion, enabling the co-treatment of organic wastes of different origin in a more economically feasible way, is described in detail. Examples of co-digestion are given, with OFMSW as a base-substrate. Finally, full-scale co-digestion plants are discussed. Various types (mechanical, biological, physico-chemical) of pre-treatment to increase the biodegradability, and thus the yields of the process, are reviewed in detail. The use of the fermentation products of anaerobic digesters for biological nutrient removal processes in wastewater treatment plants is described. This constitutes an example of integrated waste management, a field in which both economic and technical advances can be achieved. Balances are given to justify the approach, and a full-scale case study is presented. The important topic of economics and the ecological advantages of the process are emphasized. The use of compost, the integration with composting technology, and advantages over other technologies are detailed in the framework of an environmental impact assessment of biowaste treatment. Finally, the anaerobic digestion of MSW in landfills is reviewed in detail, with emphasis on landfill process enhancement and strategies for its application.

Download or read book Biological Wastewater Treatment in Warm Climate Regions written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2005-09-30 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological Wastewater Treatment in Warm Climate Regions gives a state-of-the-art presentation of the science and technology of biological wastewater treatment, particularly domestic sewage. The book covers the main treatment processes used worldwide with wastewater treatment in warm climate regions given a particular emphasis where simple, affordable and sustainable solutions are required. This comprehensive book presents in a clear and informative way the basic principles of biological wastewater treatment, including theory and practice, and covering conception, design and operation. In order to ensure the practical and didactic view of the book, 371 illustrations, 322 summary tables and 117 examples are included. All major wastewater treatment processes are covered by full and interlinked design examples which are built up throughout the book, from the determination of wastewater characteristics, the impact of discharge into rivers and lakes, the design of several wastewater treatment processes and the design of sludge treatment and disposal units. The 55 chapters are divided into 7 parts over two volumes: Volume One: (1) Introduction to wastewater characteristics, treatment and disposal; (2) Basic principles of wastewater treatment; (3) Stabilisation ponds; (4) Anaerobic reactors; Volume Two: (5) Activated sludge; (6) Aerobic biofilm reactors; (7) Sludge treatment and disposal. As well as being an ideal textbook, Biological Wastewater Treatment in Warm Climate Regions is an important reference for practising professionals such as engineers, biologists, chemists and environmental scientists, acting in consulting companies, water authorities and environmental agencies.

Download or read book Activated Sludge Models ASM1 ASM2 ASM2d and ASM3 written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: