Download or read book Acid Monolayer Functionalized Iron Oxide Nanoparticle Catalysts written by Myles Ikenberry and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Superparamagnetic iron oxide nanoparticle functionalization is an area of intensely active research, with applications across disciplines such as biomedical science and heterogeneous catalysis. This work demonstrates the functionalization of iron oxide nanoparticles with a quasi-monolayer of 11-sulfoundecanoic acid, 10-phosphono-1-decanesulfonic acid, and 11-aminoundecanoic acid. The carboxylic and phosphonic moieties form bonds to the iron oxide particle core, while the sulfonic acid groups face outward where they are available for catalysis. The particles were characterized by thermogravimetric analysis (TGA), transmission electron microscopy (TEM), potentiometric titration, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray photoelectron spectrometry (XPS), and dynamic light scattering (DLS). The sulfonic acid functionalized particles were used to catalyze the hydrolysis of sucrose at 80°C and starch at 130°C, showing a higher activity per acid site than the traditional solid acid catalyst Amberlyst-15, and comparing well against results reported in the literature for sulfonic acid functionalized mesoporous silicas. In sucrose catalysis reactions, the phosphonic-sulfonic nanoparticles (PSNPs) were seen to be incompletely recovered by an external magnetic field, while the carboxylic-sulfonic nanoparticles (CSNPs) showed a trend of increasing activity over the first four recycle runs. Between the two sulfonic ligands, the phosphonates produced a more tightly packed monolayer, which corresponded to a higher sulfonic acid loading, lower agglomeration, lower recoverability through application of an external magnetic field, and higher activity per acid site for the hydrolysis of starch. Functionalizations with 11-aminoundecanoic acid resulted in some amine groups binding to the surfaces of iron oxide nanoparticles. This amine binding is commonly ignored in iron oxide nanoparticle syntheses and functionalizations for biomedical and catalytic applications, affecting understandings of surface charge and other material properties.
Download or read book Expanding Applications of Iron Oxide Nanoparticles by Surface Functionalization written by Chuansong Duanmu and published by . This book was released on 2009 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this dissertation, research efforts mainly focused on exploring the applications of superparamagnetic iron oxide nanoparticles (SPIONs) in MR imaging and nanocatalysis via surface functionalization.
Download or read book Biocompatible Hybrid Oxide Nanoparticles for Human Health written by Inna V. Melnyk and published by Elsevier. This book was released on 2019-06-30 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocompatible Hybrid Oxide Nanoparticles for Human Health: From Synthesis to Applications explores the synthesis, structure, properties and applications of functionalized oxide nanoparticles. The books shows the applications of materials depending on their composition and structure, with a focus on silicon, titanium and iron oxides, each of which was chosen because of their unique features, including silica because it is chemically resistant to most organic solvents, harmless to living organisms, can thicken flowable formulations, and increase the strength of materials, titania for its unique chemical, optical, electrophysical and bactericidal properties, and iron-containing materials because they possess important magnetic properties. - Shows how oxide nanoparticles are being used to solve current problems in the fields of environmental protection, medicine, and in the creation of "smart" materials - Includes case studies that explore the major characteristics and applications of silica, titania and iron oxide nanomaterials - Discusses the use of biocompatible oxide nanostructures in the development of new sensing technology
Download or read book Applied Sonochemistry written by T. J. Mason and published by Wiley-VCH. This book was released on 2002-05-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power ultrasound has been used for many years in two specific industrial areas: cleaning and plastic welding. Over the last ten years an increasing interest has been shown in its potential for use over a much wider range of chemistry and processing which has been grouped together under the general title of sonochemistry. Most of these uses depend on the generation of acoustic cavitation in liquid media but this text, while underlining the importance of the physics and mathematics of cavitation, mainly concentrates on applications of the technology. After an introduction to the topic and some historical background to the uses of power ultrasound the general principles of acoustic cavitation are explored including some background physics, bubble dynamics and factors which influence cavitation. The remainder of the book incorporates a series of applications of sonochemistry which illustrate the types of physical and chemical effects of ultrasonically induced cavitation which will interest chemists and engineers alike. Amongst the major topics included are chemical synthesis, environmental protection and remediation of water, sewage and soils, polymer synthesis and processing, electrochemistry including both analytical and synthetic aspects and plating. The final chapter reviews the range of ultrasonic equipment available in the laboratory and the progress made towards the scale-up of sonochemistry. The level is introductory to semi-advanced and no topic has been taken to a particularly specialist level since it is intended that this should be of general interest to readers with a scientific background.
Download or read book Clinical Applications of Magnetic Nanoparticles written by Nguyen TK Thanh and published by CRC Press. This book was released on 2018-02-06 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering the latest information in magnetic nanoparticle (MNP) research, this book builds upon the success of the first volume and provides an updated and comprehensive review, from synthesis, characterization, and biofunctionalization to clinical applications of MNPs, including the diagnosis and treatment of cancers. The book captures some of emerging research area which was not available in the first volume. Good Manufacturing Practices and Commercialization of MNPs are also included. This volume, also written by some of the most qualified experts in the field, incorporates new developments in the literature, and continues to bridge the gaps between the different areas in this field.
Download or read book Nanoparticles written by American Chemical Society. Meeting and published by . This book was released on 2008 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes recent advances in methods to synthesize, stabilize, passivate and functionalize diverse nanoparticles from metals, metal oxides, semiconductors, polymers, organics and biomolecules. A wide range of potential appplications with nanoparticles as building blocks are described.
Download or read book Functionalized Nanomaterials II written by Vineet Kumar and published by CRC Press. This book was released on 2021-04-11 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: The functionalization of nanomaterials provides them with some unique properties, making the same nanomaterial amenable for various applications by simply manipulating functional components. However, functionalized nanomaterials also face some challenges, along with some encouraging new applications in the future. This book provides a detailed account of applications of the functionalization of nanomaterials. This book can serve as a reference book for scientific investigators, including doctoral and post-doctoral scholars and undergraduate and graduate students, in context with the scope of applications of functionalized nanomaterials. It also highlights recent advances, challenges, and opportunities in the application of nanomaterials. This book will provide critical and comparative data for nanotechnologists. It may also be beneficial for multidisciplinary researchers, industry personnel, journalists, policy makers, and the common public to understand the scope of functionalized nanomaterials in detail and in depth. Features: This book covers various applications of functionalized nanomaterials. It discusses recent global research trends and future applications of functionalized nanomaterials. It highlights the need for more rigorous regulatory frameworks for the safe use of functionalized nanomaterials. It contains contributions from international experts and will be a valuable resource for researchers.
Download or read book Functionalized Nanomaterials Based Devices for Environmental Applications written by Sudheesh K. Shukla and published by Elsevier. This book was released on 2021-08-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental devices help in monitoring the collection of one or more measurements that are used to access the status of an environment. Today, environmental monitoring and analytical methods are among the most rapidly developing branches of analysis. The functionalization of nanomaterials in the field of environmental science has increasing importance with regards to the fabrication of devices. Functionalized nanomaterials reformulate new materials and advanced characteristics for improved application in comparison to old fashion materials and open an opportunity for the development of devices for introducing new technology and techniques for monitoring environmental challenges. The monitoring of these environmental challenges in advances have direct impact on health and sustainability. Functionalized nanomaterials have different mechanical, absorption, optical or electrical properties than original nanomaterials. In fact, major utilization of nanomaterials occurs in their functionalized forms, which are very different from the parent material. This handbook provides an overview of the different state-of-the-art materials, devices and environmental applications of functionalized nanomaterials. In addition, the information offers a platform for ongoing research in the field of environmental science and device fabrication. The main objective of this book is to cover the major areas focusing on the functionalization of nanomaterials, device fabrication along with different techniques and environmental applications of functionalized nanomaterials-based devices. This is an important reference source for materials scientists, engineers and environmental scientsts who are looking to increase their understanding of how functionalized nanomaterial-based devices are being used for environmental monitoring applications. - Helps the reader to understand the basic principles of functionalization of nanomaterials - Highlights fabrication and characterization methods for functionalized nanomaterials-based environmental monitoring devices - Assesses the major challenges of creating devices using functionalized nanomaterials on a mass scale
Download or read book Supported Catalysts and Their Applications written by David C Sherrington and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to improve both the efficiency and environmental acceptability of industrial processes is driving the development of heterogeneous catalysts across the chemical industry, including commodity, specialty and fine chemicals and in pharmaceuticals and agrochemicals. Drawing on international research, Supported Catalysts and their Applications discusses aspects of the design, synthesis and application of solid supported reagents and catalysts, including supported reagents for multi-step organic synthesis; selectivity in oxidation catalysis; mesoporous molecular sieve catalysts; and the use of Zeolite Beta in organic reactions. In addition, the two discrete areas of heterogeneous catalysis (inorganic oxide materials and polymer-based catalysts) that were developing in parallel are now shown to be converging, which will be of great benefit to the whole field. Providing a snapshot of the state-of-the-art in this fast-moving field, this book will be welcomed by industrialists and researchers, particularly in the agrochemicals and pharmaceuticals industries.
Download or read book Metallic Nanoparticles written by and published by Elsevier. This book was released on 2008-11-21 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic nanoparticles display fascinating properties that are quite different from those of individual atoms, surfaces or bulk rmaterials. They are a focus of interest for fundamental science and, because of their huge potential in nanotechnology, they are the subject of intense research effort in a range of disciplines. Applications, or potential applications, are diverse and interdisciplinary. They include, for example, use in biochemistry, in catalysis and as chemical and biological sensors, as systems for nanoelectronics and nanostructured magnetism (e.g. data storage devices), where the drive for further miniaturization provides tremendous technological challenges and, in medicine, there is interest in their potential as agents for drug delivery.The book describes the structure of metallic nanoparticles, the experimental and theoretical techniques by which this is determined, and the models employed to facilitate understanding. The various methods for the production of nanoparticles are outlined. It surveys the properties of clusters and the methods of characterisation, such as photoionization, optical spectroscopy, chemical reactivity and magnetic behaviour, and discusses element-specific information that can be extracted by synchrotron-based techniques such as EXAFS, XMCD and XMLD. The properties of clusters can vary depending on whether they are free, deposited on a surface or embedded in a matrix of another material; these issues are explored. Clusters on a surface can be formed by the diffusion and aggregation of atoms; ways of modelling these processes are described. Finally we look at nanotechnology and examine the science behind the potential of metallic nanoparticles in chemical synthesis, catalysis, the magnetic separation of biomolecules, the detection of DNA, the controlled release of molecules and their relevance to data storage.The book addresses a wide audience. There was a huge development of the subject beginning in the mid-1980s where researchers began to study the properties of free nanoparticle and models were developed to describe the observations. The newcomer is introduced to the established models and techniques of the field without the need to refer to other sources to make the material accessible. It then takes the reader through to the latest research and provides a comprehensive list of references for those who wish to pursue particular aspects in more detail. It will also be an invaluable handbook for the expert in a particular aspect of nanoscale research who wishes to acquire knowledge of other areas.The authors are specialists in different aspects of the subject with expertise in physics and chemistry, experimental techniques and computational modelling, and in interdisciplinary research. They have collaborated in research. They have also collaborated in writing this book, with the aim from the outset of making it is a coherent whole rather than a series of independent loosely connected articles.* Appeals to a wide audience* Provides an introduction to established models and techniques in the field* Comprehensive list of references
Download or read book OECD Guidelines for the Testing of Chemicals Section 2 Test No 243 Lymnaea stagnalis Reproduction Test written by OECD and published by OECD Publishing. This book was released on 2016-07-29 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Test Guideline is designed to assess effects of prolonged exposure to chemicals on the reproduction and survival of the hermaphrodite freshwater snail Lymnaea stagnalis (the Great Pond Snail).
Download or read book Microbial Interactions at Nanobiotechnology Interfaces written by R. Navanietha Krishnaraj and published by John Wiley & Sons. This book was released on 2021-11-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: MICROBIAL INTERACTIONS AT NANOBIOTECHNOLOGY INTERFACES This book covers a wide range of topics including synthesis of nanomaterials with specific size, shape, and properties, structure-function relationships, tailoring the surface of nanomaterials for improving the properties, interaction of nanomaterials with proteins/microorganism/eukaryotic cells, and applications in different sectors. This book also provides a strong foundation for researchers who are interested to venture into developing functionalized nanomaterials for any biological applications in their research. Practical concepts such as modelling nanomaterials, and simulating the molecular interactions with biomolecules, transcriptomic or genomic approaches, advanced imaging techniques to investigate the functionalization of nanomaterials/interaction of nanomaterials with biomolecules and microorganisms are some of the chapters that offer significant benefits to the researchers.
Download or read book Nanobiomaterials written by Xiumei Wang and published by John Wiley & Sons. This book was released on 2017-11-21 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international team of editors and contributors from renowned universities and institutes, this book addresses the latest research in the field of nanobiomaterials, covering nanotechnologies for their fabrication, developments in biomedical applications, and the challenges of biosafety in clinic uses. Clearly structured, the volume defines the scope and classification of the field, resulting in a broad overview from fundamental principles to current technological advances, and from materials synthesis to biomedical applications along with future trends.
Download or read book King of Poisons written by John Parascandola and published by Potomac Books, Inc.. This book was released on 2012-10-31 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: For centuries, arsenic's image as a poison has been inextricably tied to images of foul play. In King of Poisons, John Parascandola examines the surprising history of this deadly element. From Gustave Flaubert to Dorothy Sayers, arsenic has long held a place in the literary realm as an instrument of murder and suicide. It was delightfully used as a source of comedy in the famous play Arsenic and Old Lace. But as Parascandola shows, arsenic has had a number of surprising real-world applications. It was frequently found in such common items as wallpaper, paint, cosmetics, and even candy, and its use in medical treatments was widespread. American ambassador Clare Boothe Luce suffered from exposure to arsenical paint in her study, and Napoleon's death has long been speculated to be the result of accidental or intentional poisoning. But arsenic poisoning is still a public menace. In the neighborhood surrounding American University in Washington, D.C., the army has undertaken a massive cleanup of artillery shells and bottles containing chemical warfare agents such as arsenical lewisite after a number of workmen and residents became ill. Arsenic contamination of the water supply in Bangladesh and in West Bengal, India, is a major public health problem today as well. From murder to crime fiction, from industrial toxin to chemical warfare, arsenic remains a powerful force in modern life.
Download or read book Nanotheranostics For Personalized Medicine written by Patrick Couvreur and published by World Scientific. This book was released on 2016-02-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of nanotechnology in the biomedical field, known as nanomedicine, has gained much interest in the recent past as a versatile strategy for selective drug delivery and diagnostic purposes. The nanotheranostic approach, which aims to combine both therapeutic and imaging/diagnostic functionalities, is characterized by a strong pluridisciplinarity where the chemistry of materials, bioconjugate chemistry, pharmaceutical technology, drug delivery, imaging, and pharmacology, work together. Nanotheranostics combine simultaneous non-invasive diagnosis and treatment of diseases with the exciting possibility to monitor drug release and distribution in real time; thus offering the opportunity to optimize treatment outcomes in cancer and other severe diseases. Clinical applications of nanotheranostics would enable earlier detection and treatment of diseases, and earlier assessment of the response, thus allowing to identify patients which would potentially respond to therapy and have higher possibilities of a favorable outcome.Nanotheranostics for Personalized Medicine presents an integrated and transdisciplinary description of nanotheranostics. It provides principles of imaging techniques and concrete examples of advances and challenges in the development of nanotheranostics for personalized medicine.This book is written for students (Bachelors to Doctoral level) as well as experienced researchers, in academia or the industry, interested in this emerging concept in the nanomedicine field.
Download or read book Synthesis and Functionalization of Iron Oxide Nanoparticles and Their Application in Hybrid Materials written by Phillip Georg Daniel and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Iron Oxide Nanoparticles for Biomedical Applications written by Sophie Laurent and published by Elsevier. This book was released on 2017-10-20 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iron Oxide Nanoparticles for Biomedical Applications: Synthesis, Functionalization and Application begins with several chapters covering the synthesis, stabilization, physico-chemical characterization and functionalization of iron oxide nanoparticles. The second part of the book outlines the various biomedical imaging applications that currently take advantage of the magnetic properties of iron oxide nanoparticles. Brief attention is given to potential iron oxide based therapies, while the final chapter covers nanocytotoxicity, which is a key concern wherever exposure to nanomaterials might occur. This comprehensive book is an essential reference for all those academics and professionals who require thorough knowledge of recent and future developments in the role of iron oxide nanoparticles in biomedicine. - Unlocks the potential of iron oxide nanoparticles to transform diagnostic imaging techniques - Contains full coverage of new developments and recent research, making this essential reading for researchers and engineers alike - Explains the synthesis, processing and characterization of iron oxide nanoparticles with a view to their use in biomedicine
