Download or read book ACI 239R 18 Ultra High Performance Concrete written by ACI Committee 239 and published by . This book was released on 2018-10 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultra High Performance Concrete written by Caijun Shi and published by CRC Press. This book was released on 2024-02-23 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-high performance concrete (UHPC) is an advanced cement-based composite material with compressive strength of over 120 MPa, high toughness, and superior durability. Since its development in the early 1990s, UHPC has attracted great interest worldwide due to its advantages. This book covers material selection and mixture design methods for developing UHPC, as well as the performance of UHPC, including fresh and hardened properties, setting and hardening, dimensional stability, static and dynamic properties, durability, long-term properties, and self-healing properties. A range of potential applications and case studies are presented to illustrate how UHPC meets requirements for lightweight, high-rise, large-span, heavy-load bearing, fast-construction, and highly durable structures in civil and construction engineering. Also introduced is a typical new concrete, seawater sea-sand UHPC, which avoids the use of freshwater and river sand in marine construction. The first book to fully cover the design, performance, and applications of UHPC, this is ideal for concrete technologists, designers, contractors, and researchers.
Download or read book Sustainable Fiber Reinforced Cementitious Composites for Construction and Building Materials written by Li Li and published by Frontiers Media SA. This book was released on 2023-07-26 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Steel Concrete Composite Structures Using High Strength Materials written by J.Y. Richard Liew and published by Woodhead Publishing. This book was released on 2021-08-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members Suggests a unified approach to designing columns with normal- and high-strength steel and concrete
Download or read book Advanced Concrete Technology written by Zongjin Li and published by John Wiley & Sons. This book was released on 2022-09-21 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Concrete Technology A thorough grounding in the science of concrete combined with the latest developments in the rapidly evolving field of concrete technology In the newly revised second edition of Advanced Concrete Technology, a distinguished team of academics and engineers delivers a state-of-the-art exploration of modern and advanced concrete technologies developed during the last decade. The book combines the essential concepts and theory of concrete with practical examples of material design, composition, processing, characterization, properties, and performance. The authors explain, in detail, the hardware and software of concrete, and offer readers discussions of the most recent advances in concrete technology, including, but not limited to, concrete recycling, nanotechnology, microstructural simulation, additive manufacturing, and non-destructive testing methods. This newest edition of Advanced Concrete Technology provides a sustained emphasis on sustainable and novel technologies, like new binders, 3D printing, and other advanced materials and techniques. Readers will also find: A thorough introduction to concrete, including its definition and its historical evolution as a material used in engineering and construction In-depth explorations of the materials for making concrete and the properties of fresh concrete Comprehensive discussions of the material structure of concrete, hardened concrete, and advanced cementitious composites Fulsome treatments of concrete fracture mechanics, non-destructive testing in concrete engineering, and future trends in concrete Perfect for undergraduate and graduate students studying civil or materials engineering—especially those taking classes in the properties of concrete or concrete technologies—as well as engineers in the concrete industry. Advanced Concrete Technology, 2nd Edition will also earn a place in the libraries of civil and materials engineers working in the industry.
Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
Download or read book Fibre Reinforced Concrete Improvements and Innovations written by Pedro Serna and published by Springer Nature. This book was released on 2020-11-05 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of fibre reinforced concrete (FRC) and discusses a diverse range of topics concerning FRC: rheology and early-age properties, mechanical properties, codes and standards, long-term properties, durability, analytical and numerical models, quality control, structural and Industrial applications, smart FRC’s, nanotechnologies related to FRC, textile reinforced concrete, structural design and UHPFRC. The contributions present improved traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists. Although the symposium was postponed, the book gathers peer-reviewed papers selected in 2020 for the RILEM-fib International Symposium on Fibre Reinforced Concrete (BEFIB).
Download or read book Numerical Modeling Strategies for Sustainable Concrete Structures written by Pierre Rossi and published by Springer Nature. This book was released on 2022-06-30 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of sustainable concrete structures, as presented by scientists and engineers at the RILEM International Conference on Numerical Modeling Strategies for Sustainable Concrete Structures (SSCS), held in Marseille, France, on July 4-6, 2022. It demonstrates that numerical methods (finite elements, finite volumes, finite differences) are a relevant response to the challenge to optimize the utilization of cement in concrete constructions while checking that these constructions have a lifespan compatible with the stakes of sustainable development. They are indeed accurate tools for an optimized design of concrete constructions, and allow us to consider all types of complexities: for example, those linked to rheological, physicochemical and mechanical properties of concrete, those linked to the geometry of the structures or even to the environmental boundary conditions. This optimization must also respect constraints of time, money, security, energy, CO2 emissions, and, more generally, life cycle more reliably than the codes and analytical approaches currently used. Numerical methods are, undoubtedly, the best calculation tools at the service of concrete eco-construction. The contributions present traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists.
Download or read book High Performance Concretes written by Paul Zia and published by . This book was released on 1991 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art report summarizes the results of an extensive search and review of available literature on the mechanical properties of concrete, with particular reference to high performance concrete for highway applications. Included in the review and discussion are the behavior of plastic concrete as well as the strength and deformation characteristics of hardened concrete. Both short-term and long-term effects are considered. Based on the review of the available information, research needs are identified. It is concluded that much research is needed to develop data on the strength and durability properties of concrete which develops high strength, particularly very early strength.
Download or read book Stainless Steel Wires Engineered Multifunctional Ultra High Performance Concrete written by Sufen Dong and published by CRC Press. This book was released on 2023-10-19 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence and application of stainless steel wires-engineered multifunctional ultra-high performance concrete advances the safety, durability, function/intelligence, resilience, and sustainability of infrastructure, thus prolonging the service life and reducing the maintenance to lower the lifecycle cost of infrastructure. This is the first reference work on this multifunctional concrete, which combines high performance with functional/ smart properties, such as thermal, electrical, self-sensing, and electromagnetic properties, as well as a sustainable profile. The book delivers both fundamentals and applications about multifunctional concrete, covering basic principles, properties, mechanisms, engineering application cases, and future development challenges and strategies. Stainless Steel Wires-Engineered Multifunctional Ultra-High Performance Concrete opens up a new horizon for researchers and specialist technologists in the field of concrete materials and structures.
Download or read book Fundamentals of High Performance Concrete written by Edward G. Nawy and published by John Wiley & Sons. This book was released on 2001 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: High performance concrete is a key element in virtually all-large construction projects, from tall office and residential buildings to bridges, tunnels and roadways. The fully updated Second Edition helps professionals to understand the performance capabilities of these construction materials when selecting the type of concrete to use for particular projects. The author is one of the worlds acknowledged experts on high performance concrete.
Download or read book 28th Concrete Days written by Šárka Nenadálová and published by Trans Tech Publications Ltd. This book was released on 2022-10-28 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed extended articles based on abstracts presented at the 28th International Conference Concrete Days 2022 Aggregated Book
Download or read book Sustainable Concrete Materials and Structures written by Ashraf Ashour and published by Elsevier. This book was released on 2024-06-03 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Concrete Materials and Structures focuses on recent research progress and innovations in this important field of research. All aspects of the technical routes to sustainable concrete and structures are discussed in detail. These include recent findings on sustainable concrete production and structural design and construction. Low-carbon cement, sustainable concrete mix design, durability, and structural applications are discussed in detail. Emphasis is placed on how to bring some of the innovations in concrete technology closer to market. Information on techno-economic analysis, economy of scale, and the supply chain of sustainable concrete is also addressed. The book will be an essential reference resource for academic and industrial researchers working in civil engineering, material science, chemical engineering, and the development and manufacture of construction materials. Provides a comprehensive collection of technical reviews on the latest advancements in sustainable concrete materials and structures Presents state-of-the-art research on preparation, production, processing, and implementation techniques for sustainable concrete materials and structures Features techno-economic analysis for each technology discussed Covers lifecycle assessment, the Circular Economy and end of life of concrete structures Includes industry case studies on implementation
Download or read book ICE Handbook of Concrete Durability written by Marios Soutsos and published by Emerald Group Publishing. This book was released on 2023-10-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Handbook of Concrete Durability, second edition is a comprehensive practical reference for professionals involved in design and maintenance of concrete structures of all types. It is an invaluable guide for construction professionals, including design engineers, consultants and contractors, as well as postgraduate students.
Download or read book High performance Concrete written by and published by . This book was released on 1999 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Concrete written by V. M. Malhotra and published by . This book was released on 2002 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Early age Cracking Control on Modern Concrete written by Dejian Shen and published by Springer Nature. This book was released on with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt:
