Download or read book Accuracy of Automated Data Collection in Production Information Systems written by William A. Smith and published by . This book was released on 1966 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Value of Accurate Automated Data Collection to Manufacturing written by Alfonso Alexander Perez and published by . This book was released on 2014 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this thesis is to demonstrate the value of implementing a novel, accurate automated data collection system and to describe a practical method for doing so. This thesis addresses the value of accurate automated data collection to manufacturing, focusing on a combined passive power monitoring and auto RFID data collection system implemented within the CNC turning and CNC milling departments at the Waters Corporation Machining Center in Milford, Massachusetts. A detailed study of the machining center revealed that inaccurate data was being used to plan production. This thesis demonstrates a graphical approach and an analytical method which can be used to determine manufacturing systems statistics such as average part cycle time and average state dependent setup time. This project addressed the problem by implementing a passive power monitoring and auto RFID data collection system used to monitor ten selected part types and four machines in the turning and milling departments. In order to prevent human error during the experiment, the author developed a series of training guides for Waters to use to avoid data fidelity issues. Since the Waters machining center is a highly metallic environment, many logistical issues were faced during the implementation phase. These logistical issues include an overlapping RFID antenna layout, operator training, and operator compliance. The present data collection system has an opportunity cost of approximately $85,775 per year. Based upon the implementation cost of the experimental setup used for this project, the cost to implement power monitoring and auto RFID at full-scale will be $60,000 in raw materials. The combined passive data collection system is expected to pay off 9 months after implementation in addition to data resolution and standardization benefits.

Download or read book Statistical Process Control in Automated Manufacturing written by Bert Keats and published by CRC Press. This book was released on 2020-11-25 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to statistical process control in automated manufacturing and suggests implementation strategies. It focuses on time series applications in statistical process control and explores the role of knowledge-based systems in process control.

Download or read book Registries for Evaluating Patient Outcomes written by Agency for Healthcare Research and Quality/AHRQ and published by Government Printing Office. This book was released on 2014-04-01 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This User’s Guide is intended to support the design, implementation, analysis, interpretation, and quality evaluation of registries created to increase understanding of patient outcomes. For the purposes of this guide, a patient registry is an organized system that uses observational study methods to collect uniform data (clinical and other) to evaluate specified outcomes for a population defined by a particular disease, condition, or exposure, and that serves one or more predetermined scientific, clinical, or policy purposes. A registry database is a file (or files) derived from the registry. Although registries can serve many purposes, this guide focuses on registries created for one or more of the following purposes: to describe the natural history of disease, to determine clinical effectiveness or cost-effectiveness of health care products and services, to measure or monitor safety and harm, and/or to measure quality of care. Registries are classified according to how their populations are defined. For example, product registries include patients who have been exposed to biopharmaceutical products or medical devices. Health services registries consist of patients who have had a common procedure, clinical encounter, or hospitalization. Disease or condition registries are defined by patients having the same diagnosis, such as cystic fibrosis or heart failure. The User’s Guide was created by researchers affiliated with AHRQ’s Effective Health Care Program, particularly those who participated in AHRQ’s DEcIDE (Developing Evidence to Inform Decisions About Effectiveness) program. Chapters were subject to multiple internal and external independent reviews.

Download or read book Tool and Manufacturing Engineers Handbook Material and Part Handling in Manufacturing written by Philip Mitchel and published by Society of Manufacturing Engineers. This book was released on 1983 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get the expert advise you need to shrink handling costs, reduce downtime and improve efficiency in plant operations! You'll use this comprehensive handbook during post design, process selection and planning, for establishing quality controls, tests, and measurements, to streamline production, and for managerial decision-making on capital investments and new automated systems.

Download or read book Successful Prediction of Product Performance written by Lev Klyatis and published by SAE International. This book was released on 2016-09-12 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to successfully predict industrial product performance during service life provides benefits for producers and users. This book addresses methods to improve product quality, reliability, and durability during the product life cycle, along with methods to avoid costs that can negatively impact profitability plans. The methods presented can be applied to reducing risk in the research and design processes and integration with manufacturing methods to successfully predict product performance. This approach incorporates components that are based on simulations in the laboratory. The results are combined with in-field testing to determine degradation parameters. These approaches result in improvements to product quality, performance, safety, profitability, and customer satisfaction. Among the methods of analyses included are: • Accelerated Reliability Testing (ART) • Accelerated Durability Testing (ADT) • system variability / input variability • engineering risk versus time and expense

Download or read book Data Sources on White collar Law breaking written by Albert J. Reiss and published by . This book was released on 1981 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book MATHEMATICAL MODELS OF LIFE SUPPORT SYSTEMS Volume II written by Valeri I. Agoshko and published by EOLSS Publications. This book was released on 2009-10-10 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Models of Life Support Systems is a component of Encyclopedia of Mathematical Sciences in which is part of the global Encyclopedia of Life Support Systems (EOLSS), an integrated compendium of twenty one Encyclopedias. The Theme is organized into several topics which represent the main scientific areas of the theme: The first topic, Introduction to Mathematical Modeling discusses the foundations of mathematical modeling and computational experiments, which are formed to support new methodologies of scientific research. The succeeding topics are Mathematical Models in - Water Sciences; Climate; Environmental Pollution and Degradation; Energy Sciences; Food and Agricultural Sciences; Population; Immunology; Medical Sciences; and Control of Catastrophic Processes. These two volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.

Download or read book Emerging Solutions for Future Manufacturing Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2006-01-04 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industries and particularly the manufacturing sector have been facing difficult challenges in a context of socio-economic turbulence characterized by complexity as well as the speed of change in causal interconnections in the socio-economic environment. In order to respond to these challenges companies are forced to seek new technological and organizational solutions. In this context two main characteristics emerge as key properties of a modern automation system – agility and distribution. Agility because systems need not only to be flexible in order to adjust to a number of a-priori defined scenarios, but rather must cope with unpredictability. Distribution in the sense that automation and business processes are becoming distributed and supported by collaborative networks. Emerging Solutions for Future Manufacturing Systems includes the papers selected for the BASYS’04 conference, which was held in Vienna, Austria in September 2004 and sponsored by the International Federation for Information Processing (IFIP).

Download or read book Department of the Interior and Related Agencies Appropriations for 1999 Justification of the budget estimates U S Geological Survey written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1998 with total page 1820 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Management written by and published by . This book was released on 1985 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research and Practical Issues of Enterprise Information Systems written by A. Min Tjoa and published by Springer. This book was released on 2007-11-14 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this conference came from a meeting of the IFIP (International Federation for Information Processing) Technical Committee for Information Systems (TC8) in Guimares, Portugal in June 2005. Our goal is to build an IFIP forum among the different Information Systems Communities of TC8 dealing with the increasing important area of Enterprise Information Systems. In this particular meeting the committee members intensively discussed the innovative and unique characteristics of Enterprise Information Systems as scientific sub-discipline. Hence, in this meeting it was decided by the TC8 members that the IFIP TC8 First International Conference on Research and Practical Issues of Enterprise Information Systems (CONFENIS 2006) would be held in April 2006 in Vienna, Austria. Dr. Li Xu (USA) and Dr. A Min Tjoa (IFIP TC8) were assigned to propose a concept for this conference in order to establish an IFIP platform for EIS researchers and practitioners in the field to share experience, and discussing opportunities and challenges. We are very pleased therefore to have this conference organised by the help of the Austrian Computer Society (OCG). OCG supports the idea of this conference due to the urgent need of research and dissemination of new techniques in this key area. We received 180 papers from more than 30 countries for CONFENIS and the Program Committee eventually selected xx papers or extended abstracts, making an acceptance rate of xx% of submitted papers. Each paper was thoroughly reviewed by at least two qualified reviewers.

Download or read book Operations Management written by R. Dan Reid and published by John Wiley & Sons. This book was released on 2019-12-05 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the business environment continues to rapidly change, Dan Reid and Nada Sanders have developed an integrated approach that makes the introductory OM course accessible and engaging for all business majors. Beyond providing a solid foundation, this course covers emerging topics like Artificial Intelligence, Robotics, Data Analytics, and Sustainability and gives equal time to strategic and tactical decisions in both service and manufacturing organizations.

Download or read book Department of the Interior and Related Agencies Appropriations for 2001 Justification of the budget estimates U S Geological Survey written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 2000 with total page 2048 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy and Water Development Appropriations for 2001 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2000 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 107 1 Hearings Energy and Water Development Appropriations for 2002 Part 2 2001 written by and published by . This book was released on 2001 with total page 2378 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Meat Poultry and Seafood Packaging written by Joseph P. Kerry and published by Elsevier. This book was released on 2012-06-22 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packaging plays an essential role in limiting undesired microbial growth and sensory deterioration. Advances in meat, poultry and seafood packaging provides a comprehensive review of both current and emerging technologies for the effective packaging of muscle foods. Part one provides a comprehensive overview of key issues concerning the safety and quality of packaged meat, poultry and seafood. Part two goes on to investigate developments in vacuum and modified atmosphere packaging for both fresh and processed muscle foods, including advances in bulk packaging and soluble carbon dioxide use. Other packaging methods are the focus of part three, with the packaging of processed, frozen, ready-to-serve and retail-ready meat, seafood and poultry products all reviewed, alongside advances in sausage casings and in-package pasteurization. Finally, part four explores emerging labelling and packaging techniques. Environmentally-compatible, antimicrobial and antioxidant active packaging for meat and poultry are investigated, along with edible films, smart packaging systems, and issues regarding traceability and regulation. With its distinguished editor and international team of expert contributors, Advances in meat, poultry and seafood packaging is a key text for those involved with the research, development and production of packaged meat, poultry and seafood products. It also provides an essential overview for post-graduate students and academic researchers with an interest in the packaging of muscle foods. Provides a comprehensive review of current and emerging technologies for the effective and safe packaging of muscle foods Investigates developments in vacuum and modified atmosphere packaging for fresh and processed muscle foods, including advances in bulk packaging and soluble carbon dioxide use Explores environmentally-compatible, antimicrobial and antioxidant active packaging for meat and poultry, along with edible films, smart packaging systems, and issues regarding traceability and regulation