Download or read book Acceptance Criteria of Complete Joint Penetration Steel Bridge Welds Evaluated Using Enhanced Ultrasonic Methods written by Robert J. Connor and published by . This book was released on 2019 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents guidelines for evaluating complete joint penetration (CJP) welds in steel bridges and proposes modifications to the American Association of State Highway and Transportation Officials (AASHTO)/American Welding Society (AWS) D1.5. Inspection of welds in steel bridges is necessary to ensure the quality of workmanship during the fabrication and construction process and later on when the bridge is in service. There are two non-destructive evaluation (NDE) methods for evaluation of complete joint penetration (CJP) welds in steel bridges: radiographic (RT) and ultrasonic (UT). Recent advances in enhanced ultrasonic methods, including the development of phased-array ultrasonic technology (PAUT), allow for efficient detection and characterization of flaws with the option of automated data collection and imaging. Criteria for categorizing weld discontinuities as acceptable or unacceptable are codified in the AASHTO/AWS D1.5M/D1.5: Bridge Welding Code (BWC). However, these acceptance criteria do not reflect the full use of the capability of enhanced ultrasonic testing methods, and furthermore are not based on the effect of weld discontinuities on bridge performance (e.g., resistance to fatigue and fracture). In addition, some weld discontinuities that are not allowed according to BWC are potentially not harmful and may not decrease service life. An updated acceptance criteria based on enhanced ultrasonic testing methods for evaluation of CJP welds in steel bridges was needed for fabricators and bridge owners.
Download or read book Aws D1 1 d1 1m written by American Welding Society and published by . This book was released on 2020-01-17 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Civil Engineer s Reference Book written by L S Blake and published by CRC Press. This book was released on 1994-03-21 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: After an examination of fundamental theories as applied to civil engineering, authoritative coverage is included on design practice for certain materials and specific structures and applications. A particular feature is the incorporation of chapters on construction and site practice, including contract management and control.
Download or read book Steel Bridge Group written by Steel Construction Institute and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding Research Council Bulletin Series written by Welding Research Council (U.S.) and published by . This book was released on 1984 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IIW Recommendations On Methods for Improving the Fatigue Strength of Welded Joints written by P J Haagensen and published by Woodhead Publishing. This book was released on 2013-01-25 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The weld toe is a primary source of fatigue cracking because of the severity of the stress concentration it produces. Weld toe improvement can increase the fatigue strength of new structures significantly. It can also be used to repair or upgrade existing structures. However, in practice there have been wide variations in the actual improvements in fatigue strength achieved. Based on an extensive testing programme organised by the IIW, this report reviews the main methods for weld toe improvement to increase fatigue strength: burr grinding, TIG dressing and hammer and needle peening. The report provides specifications for the practical use of each method, including equipment, weld preparation and operation. It also offers guidance on inspection, quality control and training as well as assessments of fatigue strength and thickness effects possible with each technique. IIW recommendations on methods for improving the fatigue strength of welded joints will allow a more consistent use of these methods and more predictable increases in fatigue strength. Provides specifications for the practical use of each weld toe method, including equipment, weld preparation and operation Offers guidance on inspection, quality control and training, as well as assessments of fatigue strength and thickness effects possible with each technique This report will allow a more consistent use of these methods and more predictable increases in fatigue strength
Download or read book Recommended Seismic Design Criteria for New Steel Moment Frame Buildings FEMA 350 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-16 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide organizations engaged in the development of consensus design standards and building code provisions with recommended criteria for the design and construction of new buildings incorporating moment-resisting steel frame construction to resist the effects of earthquakes. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA-302 - 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended design criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific design and performance evaluation procedures together with supporting commentary explaining part of the basis for these recommendations.
Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Summary of Progress National Cooperative Highway Research Program written by National Cooperative Highway Research Program and published by . This book was released on 1994 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture and Fatigue of Welded Joints and Structures written by K Macdonald and published by Elsevier. This book was released on 2011-04-19 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The failure of any welded joint is at best inconvenient and at worst can lead to catastrophic accidents. Fracture and fatigue of welded joints and structures analyses the processes and causes of fracture and fatigue, focusing on how the failure of welded joints and structures can be predicted and minimised in the design process.Part one concentrates on analysing fracture of welded joints and structures, with chapters on constraint-based fracture mechanics for predicting joint failure, fracture assessment methods and the use of fracture mechanics in the fatigue analysis of welded joints. In part two, the emphasis shifts to fatigue, and chapters focus on a variety of aspects of fatigue analysis including assessment of local stresses in welded joints, fatigue design rules for welded structures, k-nodes for offshore structures and modelling residual stresses in predicting the service life of structures.With its distinguished editor and international team of contributors, Fracture and fatigue of welded joints and structures is an essential reference for mechanical, structural and welding engineers, as well as those in the academic sector with a research interest in the field. - Analyses the processes and causes of fracture and fatigue, focusing predicting and minimising the failure of welded joints in the design process - Assesses the fracture of welded joints and structure featuring constraint-based fracture mechanics for predicting joint failure - Explores specific considerations in fatigue analysis including the assessment of local stresses in welded joints and fatigue design rules for welded structures
Download or read book Training Guidelines in Non destructive Testing Techniques written by International Atomic Energy Agency and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Verification of Performance and Design Criteria for High Performance Steel Bridges written by and published by . This book was released on 2006 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Steel (HPS) has quickly gained popularity in United States bridge applications due to its high yield strength and better weldability, toughness, ductility, and weathering characteristics. However, a great deal of information is missing from the body of knowledge on HPS performance and design criteria, especially concerning HPS-70W (485W) produced by thermo-mechanical controlled processing (TMCP). This research examines material characteristics and fatigue performance of HPS-70W (485W) TMCP, as well the performance of Ohio's first HPS bridge in service. Data from 96 tensile tests show that yield and ultimate strengths of HPS-70W (485W) TMCP are dependent upon plate thickness and orientation. 75 Charpy V-Notch (CVN) specimens were tested, and all met the ASTM A709 requirement for minimum toughness. Twenty-nine specimens were tested to investigate the fatigue resistance of continuous plates with punched, drilled, and reamed holes. Results from this investigation suggest that current restrictions mandated by some state departments of transportation concerning punching holes are not overly restrictive when HPS-485W (70W) is utilized. Performance of drilled and sub-punched and reamed specimens met or exceeded American Association of State Highway and Transportation Officials (AASHTO) (2004) requirements for Category B details. Performance of Submerged Arc Weld (SAW) and Narrow Gap Improved Electroslag Weld (NGI-ESW) welded butt-splices utilizing HPS-70W (485W) were examined. All specimens performed considerably better than predicted by the AASHTO fatigue life equation.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1975 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to the Non Destructive Testing of Welded Joints written by R. Halmshaw and published by Elsevier. This book was released on 1997-01-01 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition builds on the success of the first and covers the widespread introduction of computer technology, particularly the digitisation of data into the many branches of NDT. It surveys the new European (CEN) Standards and provisional CEN Standards on NDT, many of which are replacing British Standards. New NDT techniques not included in the first edition are also included.
Download or read book Bulletin written by Welding Research Council (U.S.) and published by . This book was released on 1984 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding Engineering written by David H. Phillips and published by John Wiley & Sons. This book was released on 2016-02-16 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to all of the important topics in welding engineering. It covers a broad range of subjects and presents each topic in a relatively simple, easy to understand manner, with emphasis on the fundamental engineering principles. • Comprehensive coverage of all welding engineering topics • Presented in a simple, easy to understand format • Emphasises concepts and fundamental principles
Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
