Download or read book Absolute Stress Measurement in Rock by Overcoring Cast in place Epoxy Inclusions written by Richard Massie Nolting and published by . This book was released on 1980 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Stress and Its Measurement written by B. Amadei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock masses are initially stressed in their current in situ state of stress and to a lesser natural state. Whether one is interested in the extent on the monitoring of stress change. formation of geological structures (folds, faults, The subject of paleostresses is only briefly intrusions, etc. ), the stability of artificial struc discussed. tures (tunnels, caverns, mines, surface excava The last 30 years have seen a major advance our knowledge and understanding of rock tions, etc. ), or the stability of boreholes, a in the in situ or virgin stress field, stress. A large body of data is now available on knowledge of along with other rock mass properties, is the state of stress in the near surface of the needed in order to predict the response of rock Earth's crust (upper 3-4km of the crust). masses to the disturbance associated with those Various theories have been proposed regarding structures. Stress in rock is usually described the origin of in situ stresses and how gravity, within the context of continuum mechanics. It is tectonics, erosion, lateral straining, rock fabric, defined at a point and is represented by a glaciation and deglaciation, topography, curva second-order Cartesian tensor with six compo ture of the Earth and other active geological nents. Because of its definition, rock stress is an features and processes contribute to the current enigmatic and fictitious quantity creating chal in situ stress field.
Download or read book Stress Regimes in the Lithosphere written by Terry Engelder and published by Princeton University Press. This book was released on 2014-07-14 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to acquaint the geoscientist with issues associated with the debate over orientation and magnitude of stress in the lithosphere. Terry Engelder provides a broad understanding of the topic, while touching some of the specific details involved in the interpretation of stress data generated by the most commonly used measurement techniques. An understanding of stress in the lithosphere starts with an introduction to nomenclature based on three reference states of stress. Since rock strength governs differential stress magnitudes, stress regimes are identified according to the specific failure mechanism (crack propagation, shear rupture, ductile flow, or frictional slip) that controls the magnitude of stress at a particular time and place in the lithosphere. After introducing the various stress regimes, the author shows how their extent in the upper crust is demarcated by direct measurements of four types: hydraulic fracture, borehole-logging, strain-relaxation, and rigid-inclusion measurements. The relationship between lithospheric stress and the properties of rocks is then presented in terms of microcrack-related phenomena and residual stress. Lithospheric stress is also inferred from the analysis of earthquakes. Finally, lithospheric stress is placed in the context of large-scale stress fields and plate tectonics. Originally published in 1993. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1981 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Abstracts written by and published by . This book was released on 1982 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Dissertation Index written by and published by . This book was released on 1984 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Resources and Excavation Technology written by Fun-Den Wang and published by . This book was released on 1977 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliography and Index of Geology written by and published by . This book was released on 1982 with total page 1562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Union Catalog written by and published by . This book was released on 1981 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1979 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Mechanics written by B. H. G. Brady and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock mechanics is a field of applied science which has become recognised as a coherent engineering discipline within the last two decades. It consists of a body of knowledge of the mechanical properties of rock, various techniques for the analysis of rock stress under some imposed perturbation, a set of established principles expressing rock mass response to load, and a logical methodology for applying these notions and techniques to real physical prob lems. Some of the areas where application of rock mechanics concepts have been demonstrated to be of industrial value include surface and subsurface construction, mining and other methods of mineral recovery, geothermal energy recovery and subsurface hazardous waste isolation. In many cases, the pressures of industrial demand for rigour and precision in project or process design have led to rapid evolution of the engineering discipline, and general improvement in its basis in both the geosciences and engineering mechanics. An intellectual commitment in some outstanding research centres to the proper development of rock mechanics has now resulted in a capacity for engineering design in rock not conceivable two decades ago. Mining engineering is an obvious candidate for application of rock mechanics principles in the design of excavations generated by mineral extrac tion. A primary concern in mining operations, either on surface or underground, is loosely termed 'ground control', i. e.
Download or read book Transactions of the Mining Geological and Metallurgical Institute of India written by Mining, Geological, and Metallurgical Institute of India and published by . This book was released on 1971 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions of the Mining Geological and Metallurgical Institute of India written by and published by . This book was released on 1971 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Engineering written by Arild Palmstrom and published by ICE Publishing. This book was released on 2014-12-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Engineering is a valuable reference tool for geotechnical engineers, geologists, consultants, contractors, and advanced students on rock engineering and engineering geology courses.
Download or read book Underground Excavations in Rock written by E.T. Brown and published by CRC Press. This book was released on 1980-06-30 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Excavations in Rock deals with the geotechnical aspects of the design of underground openings for mining and civil engineering processes.
Download or read book Transactions written by Mining, Geological, and Metallurgical Institute of India and published by . This book was released on 1970 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Engineering Principles and Practices for Underground Coal Mining written by J.M. Galvin and published by Springer. This book was released on 2016-02-02 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches readers ground engineering principles and related mining and risk management practices associated with underground coal mining. It establishes the basic elements of risk management and the fundamental principles of ground behaviour and then applies these to the essential building blocks of any underground coal mining system, comprising excavations, pillars, and interactions between workings. Readers will also learn about types of ground support and reinforcement systems and their operating mechanisms. These elements provide the platform whereby the principles can be applied to mining practice and risk management, directed primarily to bord and pillar mining, pillar extraction, longwall mining, sub-surface and surface subsidence, and operational hazards. The text concludes by presenting the framework of risk-based ground control management systems for achieving safe workplaces and efficient mining operations. In addition, a comprehensive reference list provides additional sources of information on the subject. Throughout, a large variety of examples show good and bad mining situations in order to demonstrate the application, or absence, of the established principles in practice. Written by an expert in underground coal mining and risk management, this book will help students and practitioners gain a deep understanding of the basic principles behind designing and conducting mining operations that are safe, efficient, and economically viable. Provides a comprehensive coverage of ground engineering principles within a risk management framework Features a large variety of examples that show good and poor mining situations in order to demonstrate the application of the established principles in practice Ideal for students and practitioners About the author Emeritus Professor Jim Galvin has a relatively unique combination of industrial, research and academic experience in the mining industry that spans specialist research and applied knowledge in ground engineering, mine management and risk management. His career encompasses directing ground engineering research groups in South Africa and Australia; practical mining experience, including active participation in the mines rescue service and responsibility for the design, operation, and management of large underground coal mines and for the consequences of loss of ground control as a mine manager; appointments as Professor and Head of the School of Mining Engineering at the University of New South Wales; and safety advisor to a number of Boards of Directors of organisations associated with mining. Awards Winner of the ACARP Excellence Research Award 2016. The Australian Coal Industry's Research Program selects recipients to receive ACARP Research and Industry Excellence Awards every two years. The recipients are selected on the recommendation of technical committees. They are honored for achievement of a considerable advance in an area of importance to the Australian coal mining industry. An important criterion is the likelihood of the results from the project being applied in mines. Winner of the Merv Harris Award from the Mine Managers Association of Australia. The Merv Harris Award is named for Merv Harris who donated money to be invested for a continuing award in 1988. With the award, the Mine Managers Association of Australia honors members of the Association who demonstrate technical achievement in the Australian Coal Mining Industry. The first award was granted in 1990, since then, only two people have received this honor. The book has received the following awards.... AGS (Australian Geomechanics Society) congratulates Dr Galvin for these awards
