Download or read book Absolute Pressure written by Sigmund Brouwer and published by Orca Book Publishers. This book was released on 2009-04-01 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ian has been going to Key West every summer for years, helping his Uncle Gord at his dive shop and spending as much time as he can underwater. When he's not scuba diving, he's admiring Sherri, the girl who works at the dive shop, and wondering how she would feel if he told her that he tastes blackberries whenever he sees her. A series of accidents leads Ian to believe that his uncle is in grave danger, but the truth is more complicated and terrifying than he could ever have imagined.

Download or read book Mechanics of Fluids Seventh Edition written by B S Massey and published by CRC Press. This book was released on 1998-09-23 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting material on the mechanics of fluids which is needed for an honours-degree course in civil or mechanical engineering, this text also provides relevant coverage of the subject for undergraduate courses in aeronautical and chemical engineering.

Download or read book Compartment Syndrome written by Cyril Mauffrey and published by Springer Nature. This book was released on 2019-09-02 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compartment syndrome is a complex physiologic process with significant potential harm, and though an important clinical problem, the basic science and research surrounding this entity remains poorly understood. This unique open access book fills the gap in the knowledge of compartment syndrome, re-evaluating the current state of the art on this condition. The current clinical diagnostic criteria are presented, as well as the multiple dilemmas facing the surgeon. Pathophysiology, ischemic thresholds and pressure management techniques and limitations are discussed in detail. The main surgical management strategy, fasciotomy, is then described for both the upper and lower extremities, along with wound care. Compartment syndrome due to patient positioning, in children and polytrauma patients, and unusual presentations are likewise covered. Novel diagnosis and prevention strategies, as well as common misconceptions and legal ramifications stemming from compartment syndrome, round out the presentation. Unique and timely, Compartment Syndrome: A Guide to Diagnosis and Management will be indispensable for orthopedic and trauma surgeons confronted with this common yet challenging medical condition.

Download or read book APlusPhysics written by Dan Fullerton and published by Silly Beagle Productions. This book was released on 2011-04-28 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: APlusPhysics: Your Guide to Regents Physics Essentials is a clear and concise roadmap to the entire New York State Regents Physics curriculum, preparing students for success in their high school physics class as well as review for high marks on the Regents Physics Exam. Topics covered include pre-requisite math and trigonometry; kinematics; forces; Newton's Laws of Motion, circular motion and gravity; impulse and momentum; work, energy, and power; electrostatics; electric circuits; magnetism; waves; optics; and modern physics. Featuring more than five hundred questions from past Regents exams with worked out solutions and detailed illustrations, this book is integrated with the APlusPhysics.com website, which includes online question and answer forums, videos, animations, and supplemental problems to help you master Regents Physics essentials. "The best physics books are the ones kids will actually read." Advance Praise for APlusPhysics Regents Physics Essentials: "Very well written... simple, clear engaging and accessible. You hit a grand slam with this review book." -- Anthony, NY Regents Physics Teacher. "Does a great job giving students what they need to know. The value provided is amazing." -- Tom, NY Regents Physics Teacher. "This was tremendous preparation for my physics test. I love the detailed problem solutions." -- Jenny, NY Regents Physics Student. "Regents Physics Essentials has all the information you could ever need and is much easier to understand than many other textbooks... it is an excellent review tool and is truly written for students." -- Cat, NY Regents Physics Student

Download or read book A Brief Introduction to Fluid Mechanics written by Donald F. Young and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Brief Introduction to Fluid Mechanics, 5th Edition is designed to cover the standard topics in a basic fluid mechanics course in a streamlined manner that meets the learning needs of today?s student better than the dense, encyclopedic manner of traditional texts. This approach helps students connect the math and theory to the physical world and practical applications and apply these connections to solving problems. The text lucidly presents basic analysis techniques and addresses practical concerns and applications, such as pipe flow, open-channel flow, flow measurement, and drag and lift. It offers a strong visual approach with photos, illustrations, and videos included in the text, examples and homework problems to emphasize the practical application of fluid mechanics principles

Download or read book Principles of Naval Engineering written by United States. Bureau of Naval Personnel and published by . This book was released on 1970 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of shipboard machinery, equipment, and engineering plants are presented in this text prepared for engineering officers. A general description is included of the development of naval ships, ship design and construction, stability and buoyancy, and damage and casualty control. Engineering theories are explained on the background of ship propulsion and steering, lubrication systems, measuring devices, thermodynamics, and energy exchanges. Conventional steam turbine propulsion plants are presented in such units as machinery arrangement, plant layout, piping systems, propulsion boilers and their fittings and controls, steam turbines, and heat transfer apparatus in condensate and feed systems. General principles of diesel, gasoline, and gas turbine engines are also provided. Moreover, nuclear power plants are analyzed in terms of the fission process, reactor control, and naval nuclear power plant. Auxiliary equipment is also described. The text is concluded by a survey of newly developed hull forms, propulsion and steering devices, direct energy conversion systems, combined power plants, central operations systems, and fuel conversion programs. Illustrations for explanation purposes are also given.

Download or read book Internal Combustion Engines written by R.K. Rajput and published by Laxmi Publications. This book was released on 2005-12 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fluid Mechanics for Civil and Environmental Engineers written by Ahlam I. Shalaby and published by CRC Press. This book was released on 2018-02-21 with total page 1886 pages. Available in PDF, EPUB and Kindle. Book excerpt: An ideal textbook for civil and environmental, mechanical, and chemical engineers taking the required Introduction to Fluid Mechanics course, Fluid Mechanics for Civil and Environmental Engineers offers clear guidance and builds a firm real-world foundation using practical examples and problem sets. Each chapter begins with a statement of objectives, and includes practical examples to relate the theory to real-world engineering design challenges. The author places special emphasis on topics that are included in the Fundamentals of Engineering exam, and make the book more accessible by highlighting keywords and important concepts, including Mathcad algorithms, and providing chapter summaries of important concepts and equations.

Download or read book Atlas Centaur AC 11 Flight Performance for Surveyor 4 written by and published by . This book was released on 1969 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1969 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Fluid Mechanics written by Donald F. Elger and published by John Wiley & Sons. This book was released on 2020-07-08 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Fluid Mechanics guides students from theory to application, emphasizing critical thinking, problem solving, estimation, and other vital engineering skills. Clear, accessible writing puts the focus on essential concepts, while abundant illustrations, charts, diagrams, and examples illustrate complex topics and highlight the physical reality of fluid dynamics applications. Over 1,000 chapter problems provide the “deliberate practice”—with feedback—that leads to material mastery, and discussion of real-world applications provides a frame of reference that enhances student comprehension. The study of fluid mechanics pulls from chemistry, physics, statics, and calculus to describe the behavior of liquid matter; as a strong foundation in these concepts is essential across a variety of engineering fields, this text likewise pulls from civil engineering, mechanical engineering, chemical engineering, and more to provide a broadly relevant, immediately practicable knowledge base. Written by a team of educators who are also practicing engineers, this book merges effective pedagogy with professional perspective to help today’s students become tomorrow’s skillful engineers.

Download or read book EBOOK Fundamentals of Thermal Fluid Sciences SI units written by Yunus Cengel and published by McGraw Hill. This book was released on 2012-01-16 with total page 1067 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE FOURTH EDITION IN SI UNITS of Fundamentals of Thermal-Fluid Sciences presents a balanced coverage of thermodynamics, fluid mechanics, and heat transfer packaged in a manner suitable for use in introductory thermal sciences courses. By emphasizing the physics and underlying physical phenomena involved, the text gives students practical examples that allow development of an understanding of the theoretical underpinnings of thermal sciences. All the popular features of the previous edition are retained in this edition while new ones are added. THIS EDITION FEATURES: A New Chapter on Power and Refrigeration Cycles The new Chapter 9 exposes students to the foundations of power generation and refrigeration in a well-ordered and compact manner. An Early Introduction to the First Law of Thermodynamics (Chapter 3) This chapter establishes a general understanding of energy, mechanisms of energy transfer, and the concept of energy balance, thermo-economics, and conversion efficiency. Learning Objectives Each chapter begins with an overview of the material to be covered and chapter-specific learning objectives to introduce the material and to set goals. Developing Physical Intuition A special effort is made to help students develop an intuitive feel for underlying physical mechanisms of natural phenomena and to gain a mastery of solving practical problems that an engineer is likely to face in the real world. New Problems A large number of problems in the text are modified and many problems are replaced by new ones. Some of the solved examples are also replaced by new ones. Upgraded Artwork Much of the line artwork in the text is upgraded to figures that appear more three-dimensional and realistic. MEDIA RESOURCES: Limited Academic Version of EES with selected text solutions packaged with the text on the Student DVD. The Online Learning Center (www.mheducation.asia/olc/cengelFTFS4e) offers online resources for instructors including PowerPoint® lecture slides, and complete solutions to homework problems. McGraw-Hill's Complete Online Solutions Manual Organization System (http://cosmos.mhhe.com/) allows instructors to streamline the creation of assignments, quizzes, and tests by using problems and solutions from the textbook, as well as their own custom material.

Download or read book High Temperature Processing of Milk and Milk Products written by Hilton C. Deeth and published by John Wiley & Sons. This book was released on 2017-03-14 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers many aspects of thermal processing of milk and milk products with particular focus on UHT processing. It commences with an overview of the major thermal processing technologies: thermisation, pasteurisation, extended-shelf-life (ESL), UHT and in-container sterilisation. It discusses the principles of the technologies, the processing and packaging equipment used, processing issues such as temperature-time profiles, heat stability, fouling and cleaning, and the quality and safety aspects of the products produced. It provides a balance of the engineering aspects of the processes and the chemical, microbiological and sensory aspects of the products. The changes that occur in products during processing and storage, and the related defects which can arise, are central to the book. The discussions of these changes will be an aid to industry personnel in identifying the causes of quality defects in these products and devising measures which can be taken to eliminate or minimise the defects.

Download or read book A Textbook of Fluid Mechanics LPSPE written by RK Rajput and published by S. Chand Publishing. This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A Textbook of Fluid Mechanics" provides a comprehensive coverage of the syllabus of Fluid Mechanics for different technical universities in India. Fluid mechanics has several categories, such as include Fluid kinematics, Fluid statics and Fluid dynamics. A total of 16 chapters followed by two special chapters of ';Universities' Questions (Latest) with Solutions' and ';GATE and UPSC Examinations' Questions with Answers/Solutions' after each unit also make it an excellent resource for aspirants of various entrance examinations.

Download or read book A Textbook of Fluid Mechanics and Hydraulic Machines written by RK Rajput and published by S. Chand Publishing. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Divided in two parts, “A Textbook of Fluid Mechanics and Hydraulic Machines” is one of the most exhaustive texts on the subject for close to 20 years. For the students of Mechanical Engineering, it can easily be used as a reference text for other courses as well. Important topics ranging from Fluid Dynamics, Laminar Flow and Turbulent Flow to Hydraulic Turbines and Centrifugal pumps are well explained in this book. A total of 23 chapters (combined both units) followed by two special chapters of ‘Universities' Questions (Latest) with Solutions’ and ‘GATE and UPSC Examinations' Questions with Answers/Solutions’ after each unit also make it an excellent resource for aspirants of various entrance examinations.

Download or read book Industrial Hygiene Control of Airborne Chemical Hazards Second Edition written by William Popendorf and published by CRC Press. This book was released on 2019-06-26 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Are you a practicing occupational hygienist wondering how to find a substitute organic solvent that is safer to use than the hazardous one your company is using? Chapter 6 is your resource. Are you a new hygienist looking for an alternative technology as a nonventilation substitute for an existing hazard? Chapter 8 is your resource. Are you looking for an overview of ventilation? Chapters 10 and 11 are your resource? Are you an industrial hygiene student wanting to learn about local exhaust ventilation? Chapters 13 through 16 are your resource. Are you needing to learn about personal protective equipment and respirators? Chapters 21 and 22 are your resources. This new edition brings all of these topics and more right up-to-date with new material in each chapter, including new governmental regulations. While many of the controls of airborne hazards have their origins in engineering, this author has been diligent in explaining concepts, writing equations in understandable terms, and covering the topics of non-ventilation controls, both local exhaust and general ventilation, and receiver controls at the level needed by most IHs without getting too advanced. Taken as a whole, this book provides a unique, comprehensive tool to learn the challenging yet rewarding role that industrial hygiene can play in controlling airborne chemical hazards at work. Most chapters contain a set of practice problems with the solutions available to instructors. Features Written for the novice industrial hygienist but useful to prepare for ABIH certification Explains engineering concepts but requires no prior engineering background Includes specific learning goals that differentiate the depth of learning appropriate to each topic within the fuller information and explanations provided for each chapter Contains updated governmental regulations and abundant references Presents a consistent teaching philosophy and approach throughout the book Deals with both ventilation and non-ventilation controls

Download or read book Mechanical Engineering Principles written by John Bird and published by Routledge. This book was released on 2012-05-04 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering Principles offers a student-friendly introduction to core engineering topics This book introduces mechanical principles and technology through examples and applications rather than theory. John Bird and Carl Ross do not assume any previous background in engineering studies, and as such this book can act as a core textbook for several engineering courses. This approach enables students to develop a sound understanding of engineering principles and their use in practice. These theoretical concepts are supported by 320 fully worked problems, nearly 600 further problems with answers, and 276 multiple-choice questions giving the reader a firm grounding on each topic. The new edition is up to date with the latest BTEC National specifications and can also be used on undergraduate courses in mechanical, civil, structural, aeronautical and marine engineering, together with naval architecture. A chapter has been added at the beginning on revisionary mathematics since progress in engineering studies is not possible without some basic mathematics knowledge. Minor modifications and some further worked problems have also been added throughout the text. Colour layout helps navigation and highlights key points Student-friendly approach with numerous worked problems, multiple-choice and short-answer questions, exercises, revision tests and nearly 400 diagrams Supported with free online material for students and lecturers Readers will also be able to access the free companion website at: www.routledge/cw/bird where they will find videos of practical demonstrations by Carl Ross. Full worked solutions of all 600 of the further problems will be available for lecturers/instructors use, as will the full solutions and marking scheme for the 8 revision tests.