Download or read book A Working Party Report on Marine Corrosion written by F. P. IJsseling and published by Routledge. This book was released on 1989 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics include factors affecting corrosion mechanisms, comparison of test results and performance of metallic alloys.

Download or read book A Working Party Report on Marine Corrosion written by European Federation of Corrosion and published by . This book was released on 1989 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by Liane Smith and published by CRC Press. This book was released on 2022-04-21 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the selection and qualification of corrosion resistant alloys for use in oil and gas field production facilities that handle raw and partly processed reservoir fluids at, and below, reservoir temperatures.

Download or read book Illustrated Case Histories of Marine Corrosion written by European Federation of Corrosion and published by Woodhead Publishing Limited. This book was released on 1990 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide engineers with an elementary review of cases of corrosion damage which may occur during marine service and advise on possible remedial action.

Download or read book A Working Party Report on Sea Water Corrosion of Stainless Steels Mechanisms and Experiences written by European Federation of Corrosion and published by Woodhead Publishing Limited. This book was released on 1996 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers presented at a workshop in 1995 organised by SINTEF Corrosion and Surface Technology (Trondheim) in co-operation with the EFC Working Parties on Marine Corrosion and Microbial Corrosion. Particular attention was given to biofilms, their causes, effects and prevention, as well as to the behaviour in seawater of high alloyed austenitic stainless steels including 6Mo, and super duplex stainless steels.

Download or read book A Working Party Report on Marine Corrosion of Stainless Steels written by and published by . This book was released on 1993 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Working Party Report on Corrosion Inhibitors written by European Federation of Corrosion. Inhibitors Working Party and published by . This book was released on 1994 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Working Party Report on Corrosion in the Nuclear Industry EFC 1 written by European Federation Corrosion Working Party on Nuclear Corrosion and published by CRC Press. This book was released on 2020-03-09 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1989. The EFC, incorporated in Belgium, was founded in 1955 with the purpose of promoting European co-operation in the fields of research into corrosion and corrosion prevention. In 1986 the EFC Working Party on Nuclear Corrosion was reorganised with the objective of concentrating on nine topics of relevance to the nuclear power industry. The group of experts in the Working Party. The new structure of the Working Party is based on the following topics: - Pressurised Water Reactors - Boiling Water Reactors - Fuel Elements (Cladding) - Advanced Gas Reactors - High Temperature Reactors - Liquid Metal Fast Breeders - Fusion Reactors - Reprocessing - Waste Management (Disposal). The first meeting of the Working Party following the restructuring was on the occasion of EUROCORR '87 in Frankfurt. The present volume has therefore been prepared and represents Number One in the series of EFC publications.

Download or read book Corrosion Performance of Metals for the Marine Environment EFC 63 written by Roger Francis and published by CRC Press. This book was released on 2019-05-14 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers with an interest in the marine environment can take advantage of many years of accumulated corrosion experience in a quick and concise manner with this publication. It covers the corrosion behavior in sea water of steel, stainless steel and cast iron as well as alloys of copper, aluminum, nickel and titanium. Applications, commonly-used alloy compositions and mechanical properties are also covered for each alloy system, plus a special section is devoted to galvanic corrosion and its avoidance.

Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by European Federation of Corrosion and published by CRC Press. This book was released on 2002 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and updated set of guidelines applicable to stainless steels, nickel alloys and titanium alloys covering: SSC/SCC test procedures; reference environments for SSC and SCC testing; guidance on autoclave testing of CRAs; procedures for testing CRAs exposed to sulphur and H2S.

Download or read book A Working Party Report on Corrosion Problems Related to Nuclear Waste Disposal written by European Federation of Corrosion and published by . This book was released on 1992 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Working Party Report on CO2 Corrosion Control in Oil and Gas Production written by Liane M. Smith and published by Woodhead Publishing Limited. This book was released on 1997 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Marine Corrosion of Stainless Steels written by D. Féron and published by CRC Press. This book was released on 2021-04-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is Number 33 of the Marine Corrosion of Stainless Steels, a publication of the European Federation of Corrosion (EFC). Part I of this volume on the "Marine Corrosion of Stainless Steels" consists of five chapters and is concerned with tests that were conducted in the 1990s on the corrosivity of European sea waters (Atlantic, Baltic, English Channel, Mediterranean, and North Sea) towards three types of stainless steels. Results from these two test programmes were presented at a European Workshop on Sea Water Corrosion of Stainless Steels in Trondheim in 1996 and at various corrosion conferences, mostly in Europe. The other four chapters in Part I describe experimental procedures, critical pitting temperature data, crevice corrosion results and results from the MAST biofilm studies. The remaining 23 chapters of the book are concerned with reviews and reports that develop the above topics.

Download or read book A Working Party Report on Guidelines on Materials Requirements for Carbon and Low Alloy Steels for H2S containing Environments in Oil and Gas Production written by and published by CRC Press. This book was released on 1995 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recommended Practice for Corrosion Management of Pipelines in Oil Gas Production and Transportation written by Bijan Kermani and published by CRC Press. This book was released on 2017-12-02 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Pipeline integrity is key to maintaining operational success, safety and security and minimising harm to the environment. Corrosion is a dominant contributory factor to failures, leaks and integrity threats in pipelines. Therefore, its optimum control within an integrity management framework is paramount for the cost-effective design of facilities and ensuring continued, uninterrupted and safe operations within the expected design life. This recommended practice (RP) is a compendium of current best practices and state-of-the-art knowledge by major operators, engineering contractors and service companies involved in hydrocarbon pro-duction and transportation. The RP incorporates some minimum operational requirements and practices to ensure that when man-aging corrosion in pipelines, fundamental principles are followed. It covers management of corrosion for pipelines carrying hydrocarbons, injection water and/or produced water from design to decommissioning. It is structured to follow the logical steps of a basic corrosion management process and makes references to relevant and available international standards and/or recommended practices. It is intended for use by personnel from the petroleum industry having knowledge of corrosion and materials. It is hoped that this RP will prove to be a key reference document for engineers, suppliers and con-tractors working in the oil and gas industry, paving the way for corrosion-free operation of pipelines with the ultimate goal of improving safety, security and minimising the impact on the environment

Download or read book Corrosion Under Insulation CUI Guidelines written by Gino De Landtsheer and published by Woodhead Publishing. This book was released on 2020-08-22 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Under Insulation (CUI) Guidelines: Technical Guide for Managing CUI, Third Edition, Volume 55 builds upon the success of the first two editions to provide a fully up-to-date, practical source of information on how to monitor and manage insulated systems. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical, and offshore companies. The guidelines were intended for use on all plants and installations that contain insulated vessels, piping, and equipment, and cover a risk-based inspection methodology for CUI, inspection techniques, and recommended best practices for mitigating CUI. The guidelines include design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials, and protection guards. Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection, or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. Provides revised and updated technical guidance on managing CUI provided by EFC Working Parties 13 and 15 Discusses the standard approach to risk based inspection methodology Presents the argument that CUI is everywhere, and looks at mitigating actions that can be started from the onset Includes a wide array of concepts of corrosion mitigation

Download or read book Understanding Biocorrosion written by T Liengen and published by Elsevier. This book was released on 2014-11-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocorrosion refers to corrosion influenced by bacteria adhering to surfaces in biofilms. Biocorrosion is a major problem in areas such as cooling systems and marine structures where biofilms can develop. This book summarises key recent research in this subject. Part one looks at theories of biocorrosion and measurement techniques. Part two discusses how bacteria and biofilms result in biocorrosion. The final part of the book includes case studies of biocorrosion in areas as diverse as buildings, fuels, marine environments and cooling systems. Provides a detailed overview of biocorrosion and the different scientific and/or industrial problems related to microbially induced corrosion Introduces a variety of investigative techniques and methodologies that are employed in diagnosing and evaluating microbially induced corrosion Includes case studies on: biodeterioration of building materials; biocorrosion issues associated with diesel and biofuels; marine biocorrosion; corrosion of open recirculating cooling water systems and cooling system components; the effect of H2S on steel corrosion