Download or read book A Working Party Report on CO2 Corrosion Control in Oil and Gas Production written by Liane M. Smith and published by Woodhead Publishing Limited. This book was released on 1997 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Working Party Report on CO2 Corrosion Control in Oil and Gas Production written by Liane M. Smith and published by Woodhead Publishing Limited. This book was released on 1997 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CO 2 Corrosion Control in Oil and Gas Production written by and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by Liane Smith and published by CRC Press. This book was released on 2022-04-21 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the selection and qualification of corrosion resistant alloys for use in oil and gas field production facilities that handle raw and partly processed reservoir fluids at, and below, reservoir temperatures.
Download or read book A Working Party Report on Predicting CO2 Corrosion in the Oil and Gas Industry written by and published by Ashgate Publishing. This book was released on 1994-01-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Working Party Report on the Use of Corrosion Inhibitors in Oil and Gas Production written by J. W. Palmer and published by CRC Press. This book was released on 2004 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This practical industry-oriented guide has been compiled to meet the needs of personnel employed by operators, design engineers, contractors and chemical suppliers working in the oil and gas industry. The document draws on the experience of specialists employed in various organisations and incorporates appropriate industry and in-company guidelines. Both technical and management issues are addressed and key points are provided at the end of each chapter to aid in the assimilation of the many and varied aspects that contribute to successful corrosion inhibition."--BOOK JACKET.
Download or read book Corrosion Under Insulation CUI Guidelines written by Gino De Landtsheer and published by Woodhead Publishing. This book was released on 2020-08-22 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Under Insulation (CUI) Guidelines: Technical Guide for Managing CUI, Third Edition, Volume 55 builds upon the success of the first two editions to provide a fully up-to-date, practical source of information on how to monitor and manage insulated systems. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical, and offshore companies. The guidelines were intended for use on all plants and installations that contain insulated vessels, piping, and equipment, and cover a risk-based inspection methodology for CUI, inspection techniques, and recommended best practices for mitigating CUI. The guidelines include design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials, and protection guards. Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection, or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. Provides revised and updated technical guidance on managing CUI provided by EFC Working Parties 13 and 15 Discusses the standard approach to risk based inspection methodology Presents the argument that CUI is everywhere, and looks at mitigating actions that can be started from the onset Includes a wide array of concepts of corrosion mitigation
Download or read book Local Probe Techniques for Corrosion Research written by R Oltra and published by Elsevier. This book was released on 2014-01-23 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective investigation of corrosion requires the use of methods that can probe material surfaces at the atomic or molecular level and can be used in situ. This important collection reviews the range of techniques available and how they can be used to analyse different types of corrosion.A number of chapters discuss the use of scanning probe microscopy techniques such as electrochemical scanning tunnelling microscopy and atomic force microscopy (EC-STM and EC-AFM). Other chapters analyse local electrochemical techniques such as scanning electrochemical microscopy (SECM), scanning vibrating electrode techniques (SVET), scanning droplet and scanning kelvin probe microscopy (SKFM), as well as microraman spectroscopy and photoelectrochemical imaging. The book reviews the application of these techniques in practice to various metals and types of coating as well as different kinds of corrosion.With its distinguished editors and team of contributors, this is a valuable reference for all those concerned with corrosion research. Discusses methods that can probe material surfaces at the atomic or molecular level A valuable reference for all those concerned with corrosion research
Download or read book Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation written by Jean-Pierre Celis and published by Routledge. This book was released on 2017-07-05 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first edition of Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation: A Handbook treats in a clear, concise, and practical manner an important material degradation and protection matter. It is designed as a handbook and provides a well structured approach of the basics needed to investigate the tribocorrosion behavior of passivating materials, and to conduct in a correct way a laboratory investigation on it. It provides answers on practical and theoretical approaches of tribocorrosion phenomena to engineers and medical persons involved with material assemblies subjected to aggressive environmental and mechanical conditions. For academic researchers it is a pertinent tool assisting them in how they can perform a tribocorrosion investigation and obtain results that are correctly interpreted and can be exchanged. Different parts of the book are illustrated with practical examples. This handbook is truly an indispensable guide for every professional who comes into contact with the complex material degradation and protection processes that take place under combined corrosion and wear conditions. Fields of interest include: transportation (aeronautics, maritime, rail, automotive), medical implants (orthopaedics, dentistry), biochemistry, food production, energy production, and machining. The coordination of this handbook writing was done by Professor Jean-Pierre Celis (Katholieke Universiteit Leuven, Belgium) and Professor Pierre Ponthiaux (Ecole Centrale Paris, France) assisted by twelve European experts who contributed jointly to the nine chapters of this handbook. Main topics dealt with are tribocorrosion phenomena in medical and industrial sectors, depassivation and repassivation phenomena, impact on synergism in tribocorrosion, specific testing techniques, coupling tribology-to-corrosion, design of a testing protocol, and normalisation.
Download or read book Understanding Biocorrosion written by T Liengen and published by Elsevier. This book was released on 2014-11-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocorrosion refers to corrosion influenced by bacteria adhering to surfaces in biofilms. Biocorrosion is a major problem in areas such as cooling systems and marine structures where biofilms can develop. This book summarises key recent research in this subject. Part one looks at theories of biocorrosion and measurement techniques. Part two discusses how bacteria and biofilms result in biocorrosion. The final part of the book includes case studies of biocorrosion in areas as diverse as buildings, fuels, marine environments and cooling systems. Provides a detailed overview of biocorrosion and the different scientific and/or industrial problems related to microbially induced corrosion Introduces a variety of investigative techniques and methodologies that are employed in diagnosing and evaluating microbially induced corrosion Includes case studies on: biodeterioration of building materials; biocorrosion issues associated with diesel and biofuels; marine biocorrosion; corrosion of open recirculating cooling water systems and cooling system components; the effect of H2S on steel corrosion
Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2018-09-17 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.
Download or read book Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater written by D Féron and published by Elsevier. This book was released on 2007-05-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships’ hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures. Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials. Reviews key factors affecting the corrosion and service life of copper and aluminium alloys Discusses the use of the alloys in seawater
Download or read book Corrosion by Carbon and Nitrogen written by H Grabke and published by Elsevier. This book was released on 2014-01-23 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal dusting is a form of corrosion involving the disintegration of metals and alloys into a dust of graphite and metal particles when exposed to a carburizing atmosphere. This important book reviews the factors affecting metal dusting and how it can be prevented in sectors such as the chemical and petrochemical industries and in the direct reduction of iron ores. It also considers the related corrosion phenomena of carburization and nitridation. After an introductory chapter setting out the key processes involved in metal dusting, the book reviews how this corrosion process affects a range of metals such as iron and steel, as well as nickel-based and chromium-based high-temperature alloys. There are chapters on the effects of particular gas mixtures on the corrosion process and on the use of coatings to prevent metal dusting. Processes involved in carburization and nitridation are also described and discussed. With its distinguished editors and team of contributors, Corrosion by carbon and nitrogen is a valuable reference for all those concerned with understanding and preventing these corrosion processes in various industries. Reviews this corrosion process and how it affects the petrochemical and other industries Discusses the effect of particular gas mixtures on the corrosion process
Download or read book Nuclear Corrosion written by Stefan Ritter and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Corrosion: Research, Progress and Challenges, part of the “Green Book series of the EFC, builds upon the foundations of the very first book published in this series in 1989 (“Number 1 - Corrosion in the Nuclear Industry ). This newest volume provides an overview on state-of-the-art research in some of the most important areas of nuclear corrosion. Chapters covered include aging phenomena in light water reactors, reprocessing plants, nuclear waste disposal, and supercritical water and liquid metal systems. This book will be a vital resource for both researchers and engineers working within the nuclear field in both academic and industrial environments. Discusses industry related aspects of materials in nuclear power generation and how these materials react with the environment Provides comprehensive coverage of the topic as written by noted experts in the field Includes coverage of nuclear waste corrosion
Download or read book Engineering Tools for Corrosion written by Luciano Lazzari and published by Woodhead Publishing. This book was released on 2017-07-28 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Tools for Corrosion: Design and Diagnosis proposes models and equations derived from theory. It includes discussions of the estimation of main corrosion parameters for corrosion rate, electrochemical constraints, thresholds limits and initiation time. The algorithms proposed are the conjugation of theory and engineering practice resulting from research and professional activities carried out by the author for almost four decades. Presents a rational approach to the corrosion prediction and evaluation dilemma Illustrates new models and algorithms for quantitative estimation of corrosion related factors and parameters Includes the design and interpretation of accelerated corrosion tests
Download or read book Corrosion in Amine Treating Units written by Johan van Roij and published by Woodhead Publishing. This book was released on 2021-10-27 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion in Amine Treating Units, Second Edition presents a fully updated resource with a broadened focus that includes corrosion in not only refining operations, but also in oil and gas production. New sections have been added on inhibition, corrosion modeling and metallic coatings. More detailed descriptions of the degradation mechanisms and Integrity Operating Windows (IOW) are now included, as is more in-depth information on guidelines for what sections and locations are most vulnerable to corrosion and how to control corrosion in amine units e.g., using corrosion Loop descriptions and providing indicative integrity operating windows for operation to achieve a suitable life expectance. Provides new insights on the degradation mechanisms occurring in amine treating units and the locations within the unit where they occur Discusses how to mitigate and control corrosion in amine units Provides guidance for setting up corrosion control documents and inspection and maintenance plans for amine treating units
Download or read book Corrosion Modelling with Cellular Automata written by Damien Feron and published by Elsevier. This book was released on 2024-03-18 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Modelling with Cellular Automata bridges the gap between finer scales based on atomic physics and the larger-scale based on physico-chemical properties of materials and their environments. The book describes the simulation and modeling of corrosion phenomena by cellular automata and underlines the collaborative and interdisciplinary relationships that underpin them. It explores the major achievements that have been performed to date, covers basic knowledge on cellular automata and corrosion phenomena, and includes sections on CA modeling of generalized and uniform corrosion in 2D and 3D under various conditions, including aqueous environments and high temperature processes. Finals sections present examples on the use of cellular automata for modeling localized corrosion as well as recent developments on intergranular corrosion. There is also a review on the use of CA for modeling pitting corrosion. Focuses on the use of cellular automata for modeling corrosion Covers recent advances in modeling generalized corrosion with cellular automata Illustrates how cellular automata can be used to model localized corrosion (pitting and intergranular corrosion) Spans various length scales from atomistic to mesoscale
