Download or read book Guidelines on Electrochemical Corrosion Measurements written by European Federation of Corrosion. Working Party on Physico Chemical Methods of Corrosion Testing and published by Woodhead Publishing Limited. This book was released on 1990 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by Liane Smith and published by CRC Press. This book was released on 2022-04-21 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the selection and qualification of corrosion resistant alloys for use in oil and gas field production facilities that handle raw and partly processed reservoir fluids at, and below, reservoir temperatures.
Download or read book A Working Party Report on Guidelines on Materials Requirements for Carbon and Low Alloy Steels for H2S containing Environments in Oil and Gas Production written by and published by CRC Press. This book was released on 1995 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Under Insulation CUI Guidelines written by and published by Woodhead Publishing. This book was released on 2015-11-26 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical and offshore companies. The guidelines are intended for use on all plants and installation that contain insulated vessels, piping and equipment. The guidelines cover a risk-based inspection methodology for CUI, inspection techniques and recommended best practice for mitigating CUI, including design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials and protection guards. The guidelines also include case studies. The original document first published in 2008 was very successful and provided an important resource in the continuing battle to mitigate CUI. Many members of the EFC corrosion community requested an update and this has taken between 18-24 months to do so. Hopefully this revised document will continue to serve the community providing a practical source of information on how to monitor and manage insulated systems. Revised and fully updated technical guidance on managing CUI provided by EFC Working Parties WP13 and WP 15 Contributions from a number of European refining, petrochemical and offshore companies Extensive appendices that provide additional practical guidance on the implementation of corrosion-under-insulation best practice, collected practical expertise and case studies
Download or read book Electrochemical Approach to Selected Corrosion and Corrosion Control Studies EFC 28 written by P.L. Bonora and published by CRC Press. This book was released on 2024-11-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collected papers from the 50th ISE Meeting held in Pavia , in September 1999. With special focus on Electrochemical Approach to Selected Corrosion And Corrosion Control Studies (number 28).
Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by European Federation of Corrosion and published by CRC Press. This book was released on 2002 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and updated set of guidelines applicable to stainless steels, nickel alloys and titanium alloys covering: SSC/SCC test procedures; reference environments for SSC and SCC testing; guidance on autoclave testing of CRAs; procedures for testing CRAs exposed to sulphur and H2S.
Download or read book Prediction of Long Term Corrosion Behaviour in Nuclear Waste Systems EFC 36 written by Damien Feron and published by CRC Press. This book was released on 2024-11-01 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented on prediction of long term corrosion behaviour in nuclear waste systems EFC Issue 36.
Download or read book Corrosion Under Insulation CUI Guidelines written by Gino De Landtsheer and published by Woodhead Publishing. This book was released on 2020-08-22 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Under Insulation (CUI) Guidelines: Technical Guide for Managing CUI, Third Edition, Volume 55 builds upon the success of the first two editions to provide a fully up-to-date, practical source of information on how to monitor and manage insulated systems. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical, and offshore companies. The guidelines were intended for use on all plants and installations that contain insulated vessels, piping, and equipment, and cover a risk-based inspection methodology for CUI, inspection techniques, and recommended best practices for mitigating CUI. The guidelines include design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials, and protection guards. Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection, or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. - Provides revised and updated technical guidance on managing CUI provided by EFC Working Parties 13 and 15 - Discusses the standard approach to risk based inspection methodology - Presents the argument that CUI is everywhere, and looks at mitigating actions that can be started from the onset - Includes a wide array of concepts of corrosion mitigation
Download or read book A Working Party Report on Corrosion Inhibitors written by European Federation of Corrosion. Inhibitors Working Party and published by . This book was released on 1994 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Working Party Report on CO2 Corrosion Control in Oil and Gas Production written by Liane M. Smith and published by Woodhead Publishing Limited. This book was released on 1997 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Reinforcement in Concrete EFC 25 written by J. Mietz and published by CRC Press. This book was released on 2020-08-13 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the full papers presented in the successful session "Corrosion of Steel in Concrete" at EUROCORR '97. It highlights the areas of technical development in this field, including monitoring of steel reinforcement corrosion, prevention of corrosion and electrochemical repair methods.
Download or read book Mechanical and Electro chemical Interactions under Tribocorrosion written by Pierre Ponthiaux and published by Woodhead Publishing. This book was released on 2021-08-22 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and Electro-chemical Interactions under Tribocorrosion: From Measurements to Modelling for Building a Relevant Monitoring Approach looks at progress in the field of tribocorrosion. The work is a result of the efforts of the European tribocorrosion community gathered under the auspices of the European Corrosion Federation (EFC) within WP18 Tribocorrosion. In addition to the handbook, Testing Tribocorrosion of Passivating Materials Supporting Research and industrial Innovation published in 2012, this release describes the latest scientific approaches recognized and validated experimentally to address tribocorrosion. Sections look at the phenomena of coupling through an understanding of the associated mechanisms and how to identify variables. Final sections cover strategies to control and/or extend the life of structures in a multi-process coupling situation and an in-depth description of the current state-of-the-art on modeling approaches of tribocorrosion. - Reviews the multidisciplinary basics of tribocorrosion - Includes insights into novel experimental approaches - Provides insights into advanced modeling techniques of tribocorrosion - Looks at the implication of results in the development of the monitoring of tribocorrosion
Download or read book Analytical Methods In Corrosion Science and Engineering written by Philippe Marcus and published by CRC Press. This book was released on 2005-07-27 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage from corrosion costs billions of dollars per year. Controlling corrosion requires a fundamental, in-depth understanding of the mechanisms and phenomena involved, and this understanding is best achieved through advanced analytical methods. The first book to treat both surface analytical and electrochemical techniques in a single reference, An
Download or read book Marine Corrosion of Stainless Steels written by D. Féron and published by CRC Press. This book was released on 2021-04-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is Number 33 of the Marine Corrosion of Stainless Steels, a publication of the European Federation of Corrosion (EFC). Part I of this volume on the "Marine Corrosion of Stainless Steels" consists of five chapters and is concerned with tests that were conducted in the 1990s on the corrosivity of European sea waters (Atlantic, Baltic, English Channel, Mediterranean, and North Sea) towards three types of stainless steels. Results from these two test programmes were presented at a European Workshop on Sea Water Corrosion of Stainless Steels in Trondheim in 1996 and at various corrosion conferences, mostly in Europe. The other four chapters in Part I describe experimental procedures, critical pitting temperature data, crevice corrosion results and results from the MAST biofilm studies. The remaining 23 chapters of the book are concerned with reviews and reports that develop the above topics.
Download or read book A Working Party Report on Corrosion Problems Related to Nuclear Waste Disposal written by European Federation of Corrosion and published by . This book was released on 1992 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Corrosion written by Stefan Ritter and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Corrosion: Research, Progress and Challenges, part of the "Green Book series of the EFC, builds upon the foundations of the very first book published in this series in 1989 ("Number 1 - Corrosion in the Nuclear Industry). This newest volume provides an overview on state-of-the-art research in some of the most important areas of nuclear corrosion. Chapters covered include aging phenomena in light water reactors, reprocessing plants, nuclear waste disposal, and supercritical water and liquid metal systems. This book will be a vital resource for both researchers and engineers working within the nuclear field in both academic and industrial environments. - Discusses industry related aspects of materials in nuclear power generation and how these materials react with the environment - Provides comprehensive coverage of the topic as written by noted experts in the field - Includes coverage of nuclear waste corrosion
Download or read book Organic and Inorganic Coatings for Corrosion Prevention written by L. Fedrizzi and published by CRC Press. This book was released on 2019-11-28 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic and Inorganic Coatings for Corrosion Prevention - Research and Experiences is a collection of Papers from EUROCORR '96 and published for the European Federation of Corrosion by The Institute of Materials. In the session on Coatings the following topics were discussed: • Life-time prediction of organic coatings; • Environmentally friendly coatings; • Testing; and • Surface preparation techniques. This book contains a selection of the scientific work presented in the Conference with the aim of focusing on the research developments in the frame of corrosion protection coatings for industrial use. The book is in four sections describing, respectively, organic coatings, zinc coatings, other metallic coatings and ceramic coatings.
