Download or read book Engineering Turbulence Modelling and Experiments 4 written by D. Laurence and published by Elsevier. This book was released on 1999-04-14 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.
Download or read book Transition Turbulence and Combustion Modelling written by A. Hanifi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This single-volume work gives an introduction to the fields of transition, turbulence, and combustion modeling of compressible flows and provides the physical background for today’s modeling approaches in these fields. It presents basic equations and discusses fundamental aspects of hydrodynamical instability.
Download or read book Advanced Approaches in Turbulence written by Paul Durbin and published by Elsevier. This book was released on 2021-07-24 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Approaches in Turbulence: Theory, Modeling, Simulation and Data Analysis for Turbulent Flows focuses on the updated theory, simulation and data analysis of turbulence dealing mainly with turbulence modeling instead of the physics of turbulence. Beginning with the basics of turbulence, the book discusses closure modeling, direct simulation, large eddy simulation and hybrid simulation. The book also covers the entire spectrum of turbulence models for both single-phase and multi-phase flows, as well as turbulence in compressible flow. Turbulence modeling is very extensive and continuously updated with new achievements and improvements of the models. Modern advances in computer speed offer the potential for elaborate numerical analysis of turbulent fluid flow while advances in instrumentation are creating large amounts of data. This book covers these topics in great detail. - Covers the fundamentals of turbulence updated with recent developments - Focuses on hybrid methods such as DES and wall-modeled LES - Gives an updated treatment of numerical simulation and data analysis
Download or read book Engineering Turbulence Modelling and Experiments 6 written by Wolfgang Rodi and published by Elsevier. This book was released on 2005-05-05 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements).The proceedings include papers dealing with the following areas of turbulence:·Eddy-viscosity and second-order RANS models ·Direct and large-eddy simulations and deductions for conventional modelling ·Measurement and visualization techniques, experimental studies ·Turbulence control ·Transition and effects of curvature, rotation and buoyancy on turbulence ·Aero-acoustics ·Heat and mass transfer and chemically reacting flows ·Compressible flows, shock phenomena ·Two-phase flows ·Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.
Download or read book Development of a Recursion RNG based Turbulence Model written by Institute for Computer Applications in Science and Engineering and published by . This book was released on 1993 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct and Large Eddy Simulation VIII written by Hans Kuerten and published by Springer Science & Business Media. This book was released on 2011-10-05 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume continues previous DLES proceedings books, presenting modern developments in turbulent flow research. It is comprehensive in its coverage of numerical and modeling techniques for fluid mechanics. After Surrey in 1994, Grenoble in 1996, Cambridge in 1999, Enschede in 2001, Munich in 2003, Poitiers in 2005, and Trieste in 2009, the 8th workshop, DLES8, was held in Eindhoven, The Netherlands, again under the auspices of ERCOFTAC. Following the spirit of the series, the goal of this workshop is to establish a state-of-the-art of DNS and LES techniques for the computation and modeling of transitional/turbulent flows covering a broad scope of topics such as aerodynamics, acoustics, combustion, multiphase flows, environment, geophysics and bio-medical applications. This gathering of specialists in the field was a unique opportunity for discussions about the more recent advances in the prediction, understanding and control of turbulent flows in academic or industrial situations.
Download or read book Prediction of Transonic Vortex Flows Using Linear and Nonlinear Turbulent Eddy Viscosity Models written by Robert E. Bartels and published by . This book was released on 2000 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Threee-dimensional transonic flow over a delta wing is investigated with a focus on the effect of transition and influence of turbulence stress anisotropies. The performance of linear eddy viscosity models and an explicit algebraic stress model is assessed at the start of the vortex flow, and the results compared with experimental data. To assess the effect of transition location, computations that either fix transition or are fully turbulent are performed. To assess the effect of the turbulent stress ansiotropy, comparisons are made between predictions from the algebraic stress model and the linear eddy viscosity models. Both transition location and turbulent stress anisotropy significantly affect the 3D flow field. The most significant effect is found to be the modeling of transition location. At a Mach number of 0.90, the computed solution changes character from steady to unsteady depending on transition onset. Accounting for the anisotropies in the turbulent stresses also considerably impacts the flow, most notably in the outboard region of flow separation.
Download or read book New Results in Numerical and Experimental Fluid Mechanics XII written by Andreas Dillmann and published by Springer Nature. This book was released on 2019-09-26 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers contributions to the 21st biannual symposium of the German Aerospace Aerodynamics Association (STAB) and the German Society for Aeronautics and Astronautics (DGLR). The individual chapters reflect ongoing research conducted by the STAB members in the field of numerical and experimental fluid mechanics and aerodynamics, mainly for (but not limited to) aerospace applications, and cover both nationally and EC-funded projects. Special emphasis is given to collaborative research projects conducted by German scientists and engineers from universities, research-establishments and industries. By addressing a number of cutting-edge applications, together with the relevant physical and mathematics fundamentals, the book provides readers with a comprehensive overview of the current research work in the field. The book’s primary emphasis is on aerodynamic research in aeronautics and astronautics, and in ground transportation and energy as well.
Download or read book Annual Research Briefs written by Center for Turbulence Research (U.S.) and published by . This book was released on 2007 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling and Simulation of Turbulent Heat Transfer written by B. Sundén and published by WIT Press. This book was released on 2005-02-21 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable information for both graduate researchers and R & D engineers in industry and consultancy, this book focuses on the modelling and simulation of fluid flow and thermal transport phenomena in turbulent convective flows. Its overall objective is to present state-of-the-art knowledge in order to predict turbulent heat transfer processes in fundamental and idealized flows as well as in engineering applications. The chapters, which are invited contributions from some of the most prominent scientists in this field, cover a wide range of topics and follow a unified outline and presentation to aid accessibility.
Download or read book Advances in Theoretical and Computational Energy Optimization Processes written by Ferdinando Salata and published by MDPI. This book was released on 2020-12-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paradigm in the design of all human activity that requires energy for its development must change from the past. We must change the processes of product manufacturing and functional services. This is necessary in order to mitigate the ecological footprint of man on the Earth, which cannot be considered as a resource with infinite capacities. To do this, every single process must be analyzed and modified, with the aim of decarbonising each production sector. This collection of articles has been assembled to provide ideas and new broad-spectrum contributions for these purposes.
Download or read book Modeling and Simulation of Turbulent Flows written by Roland Schiestel and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides the fundamental bases for developing turbulence models on rational grounds. The main different methods of approach are considered, ranging from statistical modelling at various degrees of complexity to numerical simulations of turbulence. Each of these various methods has its own specific performances and limitations, which appear to be complementary rather than competitive. After a discussion of the basic concepts, mathematical tools and methods for closure, the book considers second order closure models. Emphasis is placed upon this approach because it embodies potentials for clarifying numerous problems in turbulent shear flows. Simpler, generally older models are then presented as simplified versions of the more general second order models. The influence of extra physical parameters is also considered. Finally, the book concludes by examining large Eddy numerical simulations methods. Given the book’s comprehensive coverage, those involved in the theoretical or practical study of turbulence problems in fluids will find this a useful and informative read.
Download or read book Advances in Turbulence 3 written by Arne V. Johansson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the following main topics: turbulence structure, transition, dynamical systems in relation to transition, turbulent combustion and mixing, turbulence affected by body forces, turbulence modeling, drag reduction, and novel experimental techniques.
Download or read book Progress in Turbulence VI written by Joachim Peinke and published by Springer. This book was released on 2016-03-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the edited and reviewed contributions presented in the 6th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume has been produced after the conference so that the authors had the possibility to incorporate comments and discussions raised during the meeting. In the present book the contributions have been structured according to the topics : I Theory II Wall bounded flows III Particles in flows IV Free flows V Complex flows The volume is dedicated to the memory of Prof. Konrad Bajer who prematurely passed away in Warsaw on August 29, 2014.
Download or read book Turbulent Shear Flows 9 written by Franz Durst and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inaugural Symposium on Turbulent Shear Flows was held at The Pennsylvania State University in 1977. Thereafter the locations for the biennial symposium have alternated between the USA and Europe. However, the ninth Symposium on Turbu lent Shear Flows was awarded to Japan in recognition of the strong support researchers of the Pacific Rim countries have given previous symposia. The University of Kyoto was the host institution and the meeting was held in the Inter national Conference Hall. The Local Arrangements Committee did a superb job scheduling traditional Japanese dinners and arranging visits to the many cultural treasures in the Kyoto region. The meeting attracted more than 260 offers of papers. Thirty-three sessions were scheduled to accommodate the 138 papers accepted for oral presentation. In addition a poster session was scheduled on each of the three days to accommodate a total of 42 poster presentations. From the presentations at the symposium 24 have been selected for inclusion in this volume. The authors of these papers have revised them taking into consideration comments made during their oral presentation and recommendations made by the Editors. Four subject areas are identified, namely closures and fundamentals, free flows, wall flows, and combustion and recirculating flows. Eminent authorities have prepared introductory articles fot each topic to put the individual contributions in context with each other and with related research.
Download or read book Modeling Complex Turbulent Flows written by Manuel D. Salas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence modeling both addresses a fundamental problem in physics, 'the last great unsolved problem of classical physics,' and has far-reaching importance in the solution of difficult practical problems from aeronautical engineering to dynamic meteorology. However, the growth of supercom puter facilities has recently caused an apparent shift in the focus of tur bulence research from modeling to direct numerical simulation (DNS) and large eddy simulation (LES). This shift in emphasis comes at a time when claims are being made in the world around us that scientific analysis itself will shortly be transformed or replaced by a more powerful 'paradigm' based on massive computations and sophisticated visualization. Although this viewpoint has not lacked ar ticulate and influential advocates, these claims can at best only be judged premature. After all, as one computational researcher lamented, 'the com puter only does what I tell it to do, and not what I want it to do. ' In turbulence research, the initial speculation that computational meth ods would replace not only model-based computations but even experimen tal measurements, have not come close to fulfillment. It is becoming clear that computational methods and model development are equal partners in turbulence research: DNS and LES remain valuable tools for suggesting and validating models, while turbulence models continue to be the preferred tool for practical computations. We believed that a symposium which would reaffirm the practical and scientific importance of turbulence modeling was both necessary and timely.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
