Download or read book A Theoretical and Experimental Investigation on Bending Strength and Fatigue Life of Spiral Bevel and Hypoid Gears written by Mohammad Adel Hotait and published by . This book was released on 2011 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the end, a multiaxial, crack nucleation fatigue model of tooth bending is proposed; the model accounts for the multiaxial and non-proportional nature of the stress states predicted. Fatigue lives predicted by the proposed model are compared to those estimated by using a conventional uniaxial failure criterion to show that the predicted multiaxial fatigue lives are significantly lower. The fatigue model is also used to quantify the influence of the misalignments as well as certain key cutting tool parameters on the bending fatigue life of the hypoid gear pair.

Download or read book Comparison of Experimental and Analytical Tooth Bending Stress of Aerospace Spiral Bevel Gears written by and published by . This book was released on 1999 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental study to investigate the bending stress in aerospace-quality spiral bevel gears was performed. Tests were conducted in the NASA Lewis Spiral Bevel Gear Test Facility. Multiple teeth on the spiral bevel pinion were instrumented with strain gages and tests were conducted from static (slow roll) to 14400 RPM at power levels to 540kW (720 hp). Effects of changing speed and load on the bending stress were measured. Experimental results are compared to those found by three-dimensional finite element analysis.

Download or read book Power Transmissions written by Datong Qin and published by CRC Press. This book was released on 2016-11-10 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Conference on Power Transmissions 2016, held in Chongqing, China, 27th-30th October 2016. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and a range of applications. The presented papers are catalogued into three main tracks, including design, simulation and testing, materials and manufacturing, and industrial applications. The design, simulation and testing track covers topics such as new methods and designs for all types of transmissions, modelling and simulation of power transmissions, strength, fatigue, dynamics and reliability of power transmissions, lubrication and sealing technologies and theories, and fault diagnosis of power transmissions. In the materials and manufacturing track, topics include new materials and heat treatment of power transmissions, new manufacturing technologies of power transmissions, improved tools to predict future demands on production systems, new technologies for ecologically sustainable productions and those which preserve natural resources, and measuring technologies of power transmissions. The proceedings also cover the novel industrial applications of power transmissions in marine, aerospace and railway contexts, wind turbines, the automotive industry, construction machinery, and robots.

Download or read book Experimental Comparison of Face Milled and Face Hobbed Spiral Bevel Gears written by and published by . This book was released on 2001 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental comparison of face-milled and face-hobbed spiral bevel gears was accomplished. The two differently manufactured spiral bevel gear types were tested in a closed-loop facility at NASA Glenn Research Center. Strain, vibration, and noise testing were completed at various levels of rotational speed and load. Tests were conducted from static (slow-roll) to 12600 rpm and up to 269 N.m (2380 in.lb) pinion speed and load conditions. The tests indicated that the maximum stress recorded at the root locations had nearly the same values, however the stress distribution was different from the toe to the heel. Also. the alternating stress measured was higher for the face-milled pinion than that attained for the face-bobbed pinion (larger minimum stress). The noise and vibration results indicated that the levels measured for the face-bobbed components were less than those attained for the face-milled gears tested.

Download or read book An Experimental Investigation on the Influence of Tensile Mean Stress on Gear Tooth Bending Fatigue Life written by Zachary Dean Teaford and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study, an experimental investigation on the influence of tensile mean stress on gear tooth bending fatigue life is performed. A newly developed single-tooth bending test machine is utilized to perform gear tooth bending fatigue experiments under various loading conditions. A new single-tooth bending test fixture is developed for a chosen test gear. A detailed experimental methodology is presented on dynamic and static strain measurements of the chosen test gear root fillet profile in order to (i) quantify any dynamic loading effects at high loading frequencies, and (ii) validate maximum root stress predictions. Two sets of fatigue tests are performed at load levels of R = 0.05 and R = 0.5 whose results are analyzed statistically to generate L50 and L10 curves for each loading case. Utilizing the L50 stress-life curves, a map of constant life is obtained, showing a straight-line relationships between mean stress and alternating stress. It is shown that an increase in the tensile mean stress reduces the fatigue lives of gear teeth.

Download or read book Comparison of Experimental and Analytical Tooth Bending Stress of Aerospace Spiral Bevel Gears written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-25 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental study to investigate the bending stress in aerospace-quality spiral bevel gears was performed. Tests were conducted in the NASA Lewis Spiral Bevel Gear Test Facility. Multiple teeth on the spiral bevel pinion were instrumented with strain gages and tests were conducted from static (slow roll) to 14400 RPM at power levels to 540kW (720 hp). Effects of changing speed and load on the bending stress were measured. Experimental results are compared to those found by three-dimensional finite element analysis. Handschuh, Robert F. and Bibel, George D. Glenn Research Center NASA/TM-1999-208903, NAS 1.15:208903, E-11365-1, ARL-TR-1891

Download or read book Gears written by Vincenzo Vullo and published by Springer Nature. This book was released on 2020-02-21 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the geometric and kinematic design of the various types of gears most commonly used in practical applications, also considering the problems concerning their cutting processes. The cylindrical spur and helical gears are first considered, determining their main geometric quantities in the light of interference and undercut problems, as well as the related kinematic parameters. Particular attention is paid to the profile shift of these types of gears either generated by rack-type cutter or by pinion-rack cutter. Among other things, profile-shifted toothing allows to obtain teeth shapes capable of greater strength and more balanced specific sliding, as well as to reduce the number of teeth below the minimum one to avoid the operating interference or undercut. These very important aspects of geometric-kinematic design of cylindrical spur and helical gears are then generalized and extended to the other examined types of gears most commonly used in practical applications, such as straight bevel gears; crossed helical gears; worm gears; spiral bevel and hypoid gears. Finally, ordinary gear trains, planetary gear trains and face gear drives are discussed. This is the most advanced reference guide to the state of the art in gear engineering. Topics are addressed from a theoretical standpoint, but in such a way as not to lose sight of the physical phenomena that characterize the various types of gears which are examined. The analytical and numerical solutions are formulated so as to be of interest not only to academics, but also to designers who deal with actual engineering problems concerning the gears

Download or read book Testing of Face Milled Spiral Bevel Gears at High Speed and Load written by and published by . This book was released on 2001 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spiral bevel gears are an important drive system components of rotorcraft (helicopters) currently in use. In this application the spiral bevel gears are required to transmit very high torque at high rotational speed. Available experimental data on the operational characteristics for thermal and structural behavior is relatively small in comparison to that found for parallel axis gears. An ongoing test program has been in place at NASA Glenn Research Center over the last ten years to investigate their operational behavior at operating conditions found in aerospace applications. This paper will summarize the results of the tests conducted on face-milled spiral bevel gears. The data from the pinion member (temperature and stress) were taken at conditions from slow-roll to 14400 rpm and up to 537 kW (720 hp). The results have shown that operating temperature is affected by the location of the lubricating jet with respect to the point it is injected and the operating conditions that are imposed. Also the stress measured from slow-roll to very high rotational speed, at various torque levels, indicated little dynamic affect over the rotational speeds tested.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Metals Abstracts Index written by and published by . This book was released on 1983 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Theoretical and Experimental Investigation of Deflections and Bending Moments in Cantilever Plates written by Omer L. Hageniers and published by . This book was released on 1971 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bevel Gear written by Jan Klingelnberg and published by Springer. This book was released on 2016-03-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to offer a complete presentation of bevel gears. An expert team of authors highlights the areas of application for these machine elements and presents the geometrical features of bevel gears as well as the various gear cutting processes based on gear cutting theory. The aspect of three-dimensional gearing is assessed in detail in terms of flank design, load capacity and noise behavior. A representation of production processes with the required technologies provides a knowledge base on which sound decisions can be based. The authors offer a thorough introduction to the complex world of bevel gears and present the rapid advances of these machine elements in a detailed, comprehensible manner. This book addresses design engineers in mechanical engineering and vehicle manufacturing, as well as producers of bevel gears and students in mechanical engineering.

Download or read book Proceedings of Fatigue Durability and Fracture Mechanics written by S. Seetharamu and published by Springer. This book was released on 2017-11-01 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of Fatigue Durability India 2016, which was held on September 28–30 at J N Tata Auditorium, Indian Institute of Science, Bangalore. This 2nd International Conference & Exhibition brought international industrial experts and academics together on a single platform to facilitate the exchange of ideas and advances in the field of fatigue, durability and fracture mechanics and its applications. This book comprises articles on a broad spectrum of topics from design, engineering, testing and computational evaluation of components and systems for fatigue, durability, and fracture mechanics. The topics covered include interdisciplinary discussions on working aspects related to materials testing, evaluation of damage, nondestructive testing (NDT), failure analysis, finite element modeling (FEM) analysis, fatigue and fracture, processing, performance, and reliability. The contents of this book will appeal not only to academic researchers, but also to design engineers, failure analysts, maintenance engineers, certification personnel, and R&D professionals involved in a wide variety of industries.

Download or read book Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel ZEROL Bevel and Spiral Bevel Gear Teeth written by American National Standards Institute and published by . This book was released on 1988 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 1996 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bevel Hypoid Gear Design written by Gleason Works (Rochester, N.Y.) and published by . This book was released on 1947 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: