Download or read book Pharmaceutical Engineering written by K Sambamurthy and published by New Age International. This book was released on 2007 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: It Is Well Known That The Applications Of Unit Operations Like Heat Transfer, Evaporation, Extraction, Mixing, Filtration And A Host Of Others Are Quite Common In The Pharmaceutical Industry, Be It In The Production Of Synthetic Drugs, Biological And Microbiological Products Or In The Manufacture Of Pharmaceutical Formulations. As Such Anyone Who Is To Look After These Manufacturing Operations Must Be Quite Knowledgeable With The Theoretical And Equipment Aspects Involved In The Relevant Unit Operations.Since A Major Involvement Of The Pharmacy Graduates Lies In The Numerous Manufacturing Operations Mentioned Above, It Is Very Much Necessary That The Subject Is Taught With A Pharmacy Orientation. There Is No Book So Far Which Has Achieved This. The Existing Books On Unit Operations Give Extensive Theory And Also Deal With A Lot Of Equipment Not Employed In The Pharmaceutical Industry. Due To A Lack Of A Pharmacy-Oriented Book In This Area, The Students And The Teachers Are Facing Difficulties In Many Ways.The Present Book Is The First One Of Its Kind On Pharmaceutical Engineering. The Special Features Of This Book Are As Follows: It Includes Theoretical And Equipment Aspects Relevant To Thepharmaceutical Industry And That Too To The Extent Needed For Pharmacy Graduates And Examples From Pharmaceutical Industry Are Quoted Extensively; Solutions To A Number Of Simpler Numerical Problems Are Given. At The End Of Each Chapter, A Large Number Of Questions, Both Theoretical And Numerical, Are Given. There Is Therefore No Doubt That The Book Will Be Of Great Use Not Only To The Students But Also To The Teachers In The Subject In India And Abroad As Well.

Download or read book Practical Pharmaceutical Engineering written by Gary Prager and published by John Wiley & Sons. This book was released on 2018-12-18 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to all key the elements of pharmaceuticals and biotech manufacturing and design Engineers working in the pharmaceutical and biotech industries are routinely called upon to handle operational issues outside of their fields of expertise. Traditionally the competencies required to fulfill those tasks were achieved piecemeal, through years of self-teaching and on-the-job experience—until now. Practical Pharmaceutical Engineering provides readers with the technical information and tools needed to deal with most common engineering issues that can arise in the course of day-to-day operations of pharmaceutical/biotech research and manufacturing. Engineers working in pharma/biotech wear many hats. They are involved in the conception, design, construction, and operation of research facilities and manufacturing plants, as well as the scale-up, manufacturing, packaging, and labeling processes. They have to implement FDA regulations, validation assurance, quality control, and Good Manufacturing Practices (GMP) compliance measures, and to maintain a high level of personal and environmental safety. This book provides readers from a range of engineering specialties with a detailed blueprint and the technical knowledge needed to tackle those critical responsibilities with confidence. At minimum, after reading this book, readers will have the knowledge needed to constructively participate in contractor/user briefings. Provides pharmaceutical industry professionals with an overview of how all the parts fit together and a level of expertise that can take years of on-the-job experience to acquire Addresses topics not covered in university courses but which are crucial to working effectively in the pharma/biotech industry Fills a gap in the literature, providing important information on pharmaceutical operation issues required for meeting regulatory guidelines, plant support design, and project engineering Covers the basics of HVAC systems, water systems, electric systems, reliability, maintainability, and quality assurance, relevant to pharmaceutical engineering Practical Pharmaceutical Engineering is an indispensable “tool of the trade” for chemical engineers, mechanical engineers, and pharmaceutical engineers employed by pharmaceutical and biotech companies, engineering firms, and consulting firms. It also is a must-read for engineering students, pharmacy students, chemistry students, and others considering a career in pharmaceuticals.

Download or read book Practical Manual Of Pharmaceutical Engineering written by Mrs. B. Jeevana Jyothi and published by Nirali Prakashan. This book was released on 2008-06-07 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Engineering in the Pharmaceutical Industry written by David J. am Ende and published by John Wiley & Sons. This book was released on 2011-03-10 with total page 1431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with various unique elements in the drug development process within chemical engineering science and pharmaceutical R&D. The book is intended to be used as a professional reference and potentially as a text book reference in pharmaceutical engineering and pharmaceutical sciences. Many of the experimental methods related to pharmaceutical process development are learned on the job. This book is intended to provide many of those important concepts that R&D Engineers and manufacturing Engineers should know and be familiar if they are going to be successful in the Pharmaceutical Industry. These include basic analytics for quantitation of reaction components– often skipped in ChE Reaction Engineering and kinetics books. In addition Chemical Engineering in the Pharmaceutical Industry introduces contemporary methods of data analysis for kinetic modeling and extends these concepts into Quality by Design strategies for regulatory filings. For the current professionals, in-silico process modeling tools that streamline experimental screening approaches is also new and presented here. Continuous flow processing, although mainstream for ChE, is unique in this context given the range of scales and the complex economics associated with transforming existing batch-plant capacity. The book will be split into four distinct yet related parts. These parts will address the fundamentals of analytical techniques for engineers, thermodynamic modeling, and finally provides an appendix with common engineering tools and examples of their applications.

Download or read book Pharmaceutical Process Development written by John Blacker and published by Royal Society of Chemistry. This book was released on 2011-08-17 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical process research and development is an exacting, multidisciplinary effort but a somewhat neglected discipline in the chemical curriculum. This book presents an overview of the many facets of process development and how recent advances in synthetic organic chemistry, process technology and chemical engineering have impacted on the manufacture of pharmaceuticals. In 15 concise chapters the book covers such diverse subjects as route selection and economics, the interface with medicinal chemistry, the impact of green chemistry, safety, the crucial role of physical organic measurements in gaining a deeper understanding of chemical behaviour, the role of the analyst, new tools and innovations in reactor design, purification and separation, solid state chemistry and its role in formulation. The book ends with an assessment of future trends and challenges. The book provides a valuable overview of: both early and late stage chemical development, how safe and scaleable synthetic routes are designed, selected and developed, the importance of the chemical engineering, analytical and manufacturing interfaces, the key enabling technologies, including catalysis and biocatalysis, the importance of the green chemical perspective and solid form issues. The book, written and edited by experts in the field, is a contemporary, holistic treatise, with a logical sequence for process development and mini-case histories within the chapters to bring alive different aspects of the process. It is completely pharmaceutical themed, encompassing all essential aspects, from route and reagent selection to manufacture of the active compound. The book is aimed at both graduates and postgraduates interested in a career in the pharmaceutical industry. It informs them about the breadth of the work carried out in chemical research and development departments, and gives them a feel for the challenges involved in the job. The book is also of value to academics who often understand the drug discovery arena, but have far less appreciation of the drug development area, and are thus unable to advise their students about the relative merits of careers in chemical development versus discovery.

Download or read book Therapeutic Antibody Engineering written by William R Strohl and published by Elsevier. This book was released on 2012-10-16 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of antibody engineering has become a vital and integral part of making new, improved next generation therapeutic monoclonal antibodies, of which there are currently more than 300 in clinical trials across several therapeutic areas. Therapeutic antibody engineering examines all aspects of engineering monoclonal antibodies and analyses the effect that various genetic engineering approaches will have on future candidates. Chapters in the first part of the book provide an introduction to monoclonal antibodies, their discovery and development and the fundamental technologies used in their production. Following chapters cover a number of specific issues relating to different aspects of antibody engineering, including variable chain engineering, targets and mechanisms of action, classes of antibody and the use of antibody fragments, among many other topics. The last part of the book examines development issues, the interaction of human IgGs with non-human systems, and cell line development, before a conclusion looking at future issues affecting the field of therapeutic antibody engineering. - Goes beyond the standard engineering issues covered by most books and delves into structure-function relationships - Integration of knowledge across all areas of antibody engineering, development, and marketing - Discusses how current and future genetic engineering of cell lines will pave the way for much higher productivity

Download or read book A TEXTBOOK OF PHARMACEUTICAL ENGINEERING written by Mr. Mahaveer Singh and published by Shashwat Publication. This book was released on 2024-05-15 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The titled book is “Textbook of PHARMACEUTICAL ENGINEERING” (As per PCI regulation). The idea of book originated by authors to convey a combined database for easy understanding of PHARMACEUTICAL ENGINEERING. This book is intended to communicate information on novel drug delivery techniques, to direct tutors and learners regarding fundamental concepts in Pharmaceutical Engineering. The major aim to write this textbook is to provide information in articulate summarized manner to accomplish necessities of undergraduates as per PCI regulation. This volume is designed not only according to curriculum of undergraduate courses in pharmacy by PCI but also to communicate knowledge on pharmaceutical engineering for post graduate learners. We assured this book will be originated very valuable by graduates, post graduates, professors and industrial learners.

Download or read book Chemical Engineering in the Pharmaceutical Industry written by David J. am Ende and published by John Wiley & Sons. This book was released on 2019-04-23 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the development and manufacturing of pharmaceutical products written for professionals in the industry, revised second edition The revised and updated second edition of Chemical Engineering in the Pharmaceutical Industry is a practical book that highlights chemistry and chemical engineering. The book’s regulatory quality strategies target the development and manufacturing of pharmaceutically active ingredients of pharmaceutical products. The expanded second edition contains revised content with many new case studies and additional example calculations that are of interest to chemical engineers. The 2nd Edition is divided into two separate books: 1) Active Pharmaceutical Ingredients (API’s) and 2) Drug Product Design, Development and Modeling. The active pharmaceutical ingredients book puts the focus on the chemistry, chemical engineering, and unit operations specific to development and manufacturing of the active ingredients of the pharmaceutical product. The drug substance operations section includes information on chemical reactions, mixing, distillations, extractions, crystallizations, filtration, drying, and wet and dry milling. In addition, the book includes many applications of process modeling and modern software tools that are geared toward batch-scale and continuous drug substance pharmaceutical operations. This updated second edition: Contains 30new chapters or revised chapters specific to API, covering topics including: manufacturing quality by design, computational approaches, continuous manufacturing, crystallization and final form, process safety Expanded topics of scale-up, continuous processing, applications of thermodynamics and thermodynamic modeling, filtration and drying Presents updated and expanded example calculations Includes contributions from noted experts in the field Written for pharmaceutical engineers, chemical engineers, undergraduate and graduate students, and professionals in the field of pharmaceutical sciences and manufacturing, the second edition of Chemical Engineering in the Pharmaceutical Industryf ocuses on the development and chemical engineering as well as operations specific to the design, formulation, and manufacture of drug substance and products.

Download or read book Process Systems Engineering for Pharmaceutical Manufacturing written by Ravendra Singh and published by Elsevier. This book was released on 2018-03-16 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Systems Engineering for Pharmaceutical Manufacturing: From Product Design to Enterprise-Wide Decisions, Volume 41, covers the following process systems engineering methods and tools for the modernization of the pharmaceutical industry: computer-aided pharmaceutical product design and pharmaceutical production processes design/synthesis; modeling and simulation of the pharmaceutical processing unit operation, integrated flowsheets and applications for design, analysis, risk assessment, sensitivity analysis, optimization, design space identification and control system design; optimal operation, control and monitoring of pharmaceutical production processes; enterprise-wide optimization and supply chain management for pharmaceutical manufacturing processes. Currently, pharmaceutical companies are going through a paradigm shift, from traditional manufacturing mode to modernized mode, built on cutting edge technology and computer-aided methods and tools. Such shifts can benefit tremendously from the application of methods and tools of process systems engineering. - Introduces Process System Engineering (PSE) methods and tools for discovering, developing and deploying greener, safer, cost-effective and efficient pharmaceutical production processes - Includes a wide spectrum of case studies where different PSE tools and methods are used to improve various pharmaceutical production processes with distinct final products - Examines the future benefits and challenges for applying PSE methods and tools to pharmaceutical manufacturing

Download or read book Essentials of Pharmaceutical Engineering written by Deeliprao Derle and published by Bsp Books Pvt. Limited. This book was released on 2015-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book mainly aims in guiding the teachers and students, the fundamental principles of Pharmaceutical Engineering. This book helps the students in overcoming the obstacles faced by them in understanding the aspects of Pharmaceutical Engineering. Topics, which usually confuse the students, are explained along with applications to broaden their mental horizon regarding the subject. This book is meant to serve as an introductory text for undergraduate students doing Bachelor of Pharmaceutical Sciences (B. Pharm). It will also prove useful to people working in pharmaceutical and allied industries. In keeping with its initiatory approach to pharmaceutical engineering, only the important aspects of the subject have been discussed in a simple and easily comprehensible manner.

Download or read book Design Development of Biological Chemical Food and Pharmaceutical Products written by Johannes A. Wesselingh and published by John Wiley & Sons. This book was released on 2007-09-27 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Development of Biological, Chemical, Food and Pharmaceutical Products has been developed from course material from the authors’ course in Chemical and Biochemical Product Design which has been running at the Technical University Denmark for years. The book draws on the authors’ years of experience in academia and industry to provide an accessible introduction to this field, approaching product development as a subject in its own right rather than a sideline of process engineering In this subject area, practical experience is the key to learning and this textbook provides examples and techniques to help the student get the best out of their projects. Design and Development of Biological, Chemical, Food and Pharma Products aims to aid students in developing good working habits for product development. Students are challenged with examples of real problems that they might encounter as engineers. Written in an informal, student-friendly tone, this unique book includes examples of real products and experiences from real companies to bring the subject alive for the student as well as placing emphasis on problem solving and team learning to set a foundation for a future in industry. The book includes an introduction to the subject of Colloid Science, which is important in product development, but neglected in many curricula. Knowledge of engineering calculus and basic physical chemistry as well as basic inorganic and organic chemistry are assumed. An invaluable text for students of product design in chemical engineering, biochemistry, biotechnology, pharmaceutical sciences and product development. Uses many examples and case studies drawn from a range of industries. Approaches product development as a subject in its own right rather than a sideline of process engineering Emphasizes a problem solving and team learning approach. Assumes some knowledge of calculus, basic physical chemistry and basic transport phenomena as well as some inorganic and organic chemistry.

Download or read book Pharmaceutical Manufacturing Handbook written by Shayne Cox Gad and published by John Wiley & Sons. This book was released on 2008-03-11 with total page 1386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook features contributions from a team of expert authors representing the many disciplines within science, engineering, and technology that are involved in pharmaceutical manufacturing. They provide the information and tools you need to design, implement, operate, and troubleshoot a pharmaceutical manufacturing system. The editor, with more than thirty years' experience working with pharmaceutical and biotechnology companies, carefully reviewed all the chapters to ensure that each one is thorough, accurate, and clear.

Download or read book Chemical Engineering in the Pharmaceutical Industry written by Mary T. am Ende and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 1435 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the important chemical engineering concepts for the development of new drugs, revised second edition The revised and updated second edition of Chemical Engineering in the Pharmaceutical Industry offers a guide to the experimental and computational methods related to drug product design and development. The second edition has been greatly expanded and covers a range of topics related to formulation design and process development of drug products. The authors review basic analytics for quantitation of drug product quality attributes, such as potency, purity, content uniformity, and dissolution, that are addressed with consideration of the applied statistics, process analytical technology, and process control. The 2nd Edition is divided into two separate books: 1) Active Pharmaceutical Ingredients (API’s) and 2) Drug Product Design, Development and Modeling. The contributors explore technology transfer and scale-up of batch processes that are exemplified experimentally and computationally. Written for engineers working in the field, the book examines in-silico process modeling tools that streamline experimental screening approaches. In addition, the authors discuss the emerging field of continuous drug product manufacturing. This revised second edition: Contains 21 new or revised chapters, including chapters on quality by design, computational approaches for drug product modeling, process design with PAT and process control, engineering challenges and solutions Covers chemistry and engineering activities related to dosage form design, and process development, and scale-up Offers analytical methods and applied statistics that highlight drug product quality attributes as design features Presents updated and new example calculations and associated solutions Includes contributions from leading experts in the field Written for pharmaceutical engineers, chemical engineers, undergraduate and graduation students, and professionals in the field of pharmaceutical sciences and manufacturing, Chemical Engineering in the Pharmaceutical Industry, Second Edition contains information designed to be of use from the engineer's perspective and spans information from solid to semi-solid to lyophilized drug products.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book A Textbook of Pharmaceutical Industrial Management E Book written by Biren Shah and published by Elsevier Health Sciences. This book was released on 2012-05-14 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook of Pharmaceutical Industrial Management Written in strict accordance with the prescribed syllabus, this book caters to the needs of B. Pharm. students of different universities in the country. The book can also be used as a supplementary text for MBA courses in Pharmaceutical Industrial Management. The book has been written in purview of modern requirement of students to keep them abreast with the latest management practices and operational patterns being followed in the pharmaceutical industry. It educates students about the latest techniques of strategic management and their application in the market, preparing them as adept professionals to play vital roles in futuristic global market. Salient Features Student-friendly narrative language Point wise presentation of key concepts Caricatures providing an aesthetic visual impact for understanding vital concepts 107 tables and 110 illustrations to aid students in learning and mastering key concepts Plenty of examples and practice tables to facilitate expertise in accountancy and preparation of financial documents like ledger preparation, balance book/accounts maintenance, etc. Points to Ponder at the end to help students quickly revise the chapter End-of-chapter questions from previous years’ examinations to test knowledge and skills

Download or read book Remington written by Adeboye Adejare and published by Academic Press. This book was released on 2020-11-03 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: The PCP's Bicentennial Edition Remington: The Science and Practice of Pharmacy, Twenty Third Edition, offers a trusted, completely updated source of information for education, training, and development of pharmacists. Published for the first time with Elsevier, this edition includes coverage of biologics and biosimilars as uses of those therapeutics have increased substantially since the previous edition. Also discussed are formulations, drug delivery (including prodrugs, salts, polymorphism. With clear, detailed color illustrations, fundamental information on a range of pharmaceutical science areas, and information on new developments in industry, pharmaceutical industry scientists, especially those involved in drug discovery and development will find this edition of Remington an essential reference. Intellectual property professionals will also find this reference helpful to cite in patents and resulting litigations. Additional graduate and postgraduate students in Pharmacy and Pharmaceutical Sciences will refer to this book in courses dealing with medicinal chemistry and pharmaceutics. - Contains a comprehensive source of principles of drug discovery and development topics, especially for scientists that are new in the pharmaceutical industry such as those with trainings/degrees in chemistry and engineering - Provides a detailed source for formulation scientists and compounding pharmacists, from produg to excipient issues - Updates this excellent source with the latest information to verify facts and refresh on basics for professionals in the broadly defined pharmaceutical industry

Download or read book Pharmaceutical Blending and Mixing written by P. J. Cullen and published by John Wiley & Sons. This book was released on 2015-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in four parts, this book provides a dedicated and in-depth reference for blending within the pharmaceutical manufacturing industry. It links the science of blending with regulatory requirements associated with pharmaceutical manufacture. The contributors are a combination of leading academic and industrial experts, who provide an informed and industrially relevant perspective of the topic. This is an essential book for the pharmaceutical manufacturing industry, and related academic researchers in pharmaceutical science and chemical and mechanical engineering.