Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
Download or read book Engineering Materials Science written by Milton Ohring and published by Academic Press. This book was released on 1995 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text is intended to provide undergraduate engineering students with the background needed to understand the science of structure-property relationships, as well as address the engineering concerns of materials selection in design. A computer diskette is included.
Download or read book The Materials Science of Semiconductors written by Angus Rockett and published by Springer Science & Business Media. This book was released on 2007-11-20 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes semiconductors from a materials science perspective rather than from condensed matter physics or electrical engineering viewpoints. It includes discussion of current approaches to organic materials for electronic devices. It further describes the fundamental aspects of thin film nucleation and growth, and the most common physical and chemical vapor deposition techniques. Examples of the application of the concepts in each chapter to specific problems or situations are included, along with recommended readings and homework problems.
Download or read book Aerospace Materials and Material Technologies written by N. Eswara Prasad and published by Springer. This book was released on 2016-11-11 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.
Download or read book Concepts of Materials Science written by Adrian P. Sutton and published by Oxford University Press. This book was released on 2021-06-30 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: All technologies depend on the availability of suitable materials. The progress of civilisation is often measured by the materials people have used, from the stone age to the silicon age. Engineers exploit the relationships between the structure, properties and manufacturing methods of a material to optimise their design and production for particular applications. Scientists seek to understand and predict those relationships. This short book sets out fundamental concepts that underpin the science of materials and emphasizes their relevance to mainstream chemistry, physics and biology. These include the thermodynamic stability of materials in various environments, quantum behaviour governing all matter, and active matter. Others include defects as the agents of change in crystalline materials, materials at the nanoscale, the emergence of new science at increasing length scales in materials, and man-made materials with properties determined by their structure rather than their chemistry. The book provides a unique insight into the essence of materials science at a level suitable for pre-university students and undergraduates of materials science. It will also be suitable for graduates in other subjects contemplating postgraduate study in materials science. Professional materials scientists will also find it stimulating and occasionally provocative.
Download or read book MATERIALS SCIENCE AND ENGINEERING written by V. RAGHAVAN and published by PHI Learning Pvt. Ltd.. This book was released on 2015-05-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-established and widely adopted book, now in its Sixth Edition, provides a thorough analysis of the subject in an easy-to-read style. It analyzes, systematically and logically, the basic concepts and their applications to enable the students to comprehend the subject with ease. The book begins with a clear exposition of the background topics in chemical equilibrium, kinetics, atomic structure and chemical bonding. Then follows a detailed discussion on the structure of solids, crystal imperfections, phase diagrams, solid-state diffusion and phase transformations. This provides a deep insight into the structural control necessary for optimizing the various properties of materials. The mechanical properties covered include elastic, anelastic and viscoelastic behaviour, plastic deformation, creep and fracture phenomena. The next four chapters are devoted to a detailed description of electrical conduction, superconductivity, semiconductors, and magnetic and dielectric properties. The final chapter on ‘Nanomaterials’ is an important addition to the sixth edition. It describes the state-of-art developments in this new field. This eminently readable and student-friendly text not only provides a masterly analysis of all the relevant topics, but also makes them comprehensible to the students through the skillful use of well-drawn diagrams, illustrative tables, worked-out examples, and in many other ways. The book is primarily intended for undergraduate students of all branches of engineering (B.E./B.Tech.) and postgraduate students of Physics, Chemistry and Materials Science. KEY FEATURES • All relevant units and constants listed at the beginning of each chapter • A note on SI units and a full table of conversion factors at the beginning • A new chapter on ‘Nanomaterials’ describing the state-of-art information • Examples with solutions and problems with answers • About 350 multiple choice questions with answers
Download or read book Impact of Materials on Society written by Sophia Krzys Acord and published by Library Press at Uf. This book was released on 2021-11-02 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook supports the Impact of Materials on Society course and teaching materials, developed with the Materials Research Society. The textbook, which is freely available online (https: //ufl.pb.unizin.org/imos/) and for purchase in print-on-demand format, offers an exploration into materials and the relationship with technologies and social structures. The textbook was developed by an interdisciplinary team from Engineering and Liberal Arts and Sciences, including anthropologists, sociologists, historians, media studies experts, Classicists, and more. Chapters include coverage of clay, ceramics, concrete, copper and bronze, gold and silver, steel, aluminum, polymers, and writing materials. Supplemental materials, including lecture slides, assignments, and exams, may be accessed in a companion volume: https: //ufl.pb.unizin.org/imosinstructorguide
Download or read book The Fabrication of Materials written by J. G. Tweeddale and published by Elsevier. This book was released on 2013-10-22 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Technology, Volume 2: The Fabrication of Materials deals with the processes of materials fabrication. This book focuses on systems used to transform raw materials into shaped states suitable for practical service. Principles of manufacture are discussed, along with the advantages and disadvantages of each method of fabrication and the diverse manufacturing sequences that are possible. The administrative aspects of manufacture are also considered. This volume is comprised of eight chapters and begins by introducing the reader to casting methods, including solidification casting, gravity-flow mold-filling, and pressurized mold-filling. Emphasis is placed on how materials that are reduced to a liquid state and then solidified can be prepared for service or formed to a useful shape. The chapters that follow explore powder preparation, mixing, compacting, and consolidation; mechanical means of fabrication; fabrication by bonding and machining; and the role of inventors and designers in fabrication. This volume concludes by assessing the economic aspects of fabrication, with particular reference to essential needs, conveniences, and luxuries. This book will be useful to first-year university undergraduates in engineering technician courses and more specialized technician courses.
Download or read book A Textbook of Materials Technology written by Lawrence H. Van Vlack and published by Addison Wesley Publishing Company. This book was released on 1973 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functionally Graded Materials written by Y. Miyamoto and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have elapsed since Dr. Renee Ford, editor-in-chief of Materials Technology, first suggested to me to publish a book on Functionally Graded Materials (FGMs). She said that the FGM concept, then largely unknown outside of Japan and a relatively few laboratories elsewhere, would be of great interest to everyone working in the materials field because of its potentially universal applicability. There was no book about FGMs in English at that time, although the number of research papers, review articles, and FGM conference proceedings had been increasing yearly. We discussed what the book should cover, and decided it should present a comprehensive description from basic theory to the most recent applications of FGMs. This would make it useful both as an introduction to FGMs for those simply curious about what this new materials field was all about, and also as a textbook for researchers, engineers, and graduate students in various material fields. The FGM Forum in Japan generously offered to support this publication program. is very difficult for an individual author to write a book that Because it covers such a wide range of various aspects of many different materials, I invited more than 30 eminent materials scientists throughout the world, who were associated with FGM research, to contribute selected topics. I also asked several leading researchers in this field to edit selected chapters: Dr. Barry H. Rabin, then at the U. S.
Download or read book Materials Science and Engineering written by William D. Callister and published by John Wiley & Sons. This book was released on 2011 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of previous editions, this book continues to provide engineers with a strong understanding of the three primary types of materials and composites, as well as the relationships that exist between the structural elements of materials and their properties. The relationships among processing, structure, properties, and performance components for steels, glass-ceramics, polymer fibers, and silicon semiconductors are explored throughout the chapters. The discussion of the construction of crystallographic directions in hexagonal unit cells is expanded. At the end of each chapter, engineers will also find revised summaries and new equation summaries to reexamine key concepts.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2009-12-08 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to MEMS materials, technologies and manufacturing, examining the state of the art with a particular emphasis on current and future applications. Key topics covered include: - Silicon as MEMS material - Material properties and measurement techniques - Analytical methods used in materials characterization - Modeling in MEMS - Measuring MEMS - Micromachining technologies in MEMS - Encapsulation of MEMS components - Emerging process technologies, including ALD and porous silicon Written by 73 world class MEMS contributors from around the globe, this volume covers materials selection as well as the most important process steps in bulk micromachining, fulfilling the needs of device design engineers and process or development engineers working in manufacturing processes. It also provides a comprehensive reference for the industrial R&D and academic communities. - Veikko Lindroos is Professor of Physical Metallurgy and Materials Science at Helsinki University of Technology, Finland. - Markku Tilli is Senior Vice President of Research at Okmetic, Vantaa, Finland. - Ari Lehto is Professor of Silicon Technology at Helsinki University of Technology, Finland. - Teruaki Motooka is Professor at the Department of Materials Science and Engineering, Kyushu University, Japan. - Provides vital packaging technologies and process knowledge for silicon direct bonding, anodic bonding, glass frit bonding, and related techniques - Shows how to protect devices from the environment and decrease package size for dramatic reduction of packaging costs - Discusses properties, preparation, and growth of silicon crystals and wafers - Explains the many properties (mechanical, electrostatic, optical, etc), manufacturing, processing, measuring (incl. focused beam techniques), and multiscale modeling methods of MEMS structures
Download or read book Materials and Design written by Michael F. Ashby and published by Elsevier. This book was released on 2009-10-28 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Design: The Art and Science of Material Selection in Product Design, Second Edition, discusses the role of materials and processes in product design. The book focuses on the materials that designers need, as well as on how and why they use them. The book's 10 chapters cover topics such as function and personality, factors influencing product design, the design process, materials selection, and case studies in materials and design. Appendices for each chapter provide exercises for readers, along with detailed charts of technical attributes of different materials for reference. This book will be particularly useful to both students and working designers. Students are introduced to the role of materials in manufacturing and design, with the help of familiar language and concepts. Working designers can use the book as a reference source for materials and manufacturing. - The best guide ever published on the on the role of materials, past and present, in product development, by noted materials authority Mike Ashby and professional designer Kara Johnson--now with even better photos and drawings on the Design Process - Significant new section on the use of re-cycled materials in products, and the importance of sustainable design for manufactured goods and services - Enhanced materials profiles, with addition of new materials types like nanomaterials, advanced plastics and bio-based materials
Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners
Download or read book Advanced Materials written by Ajit Behera and published by Springer Nature. This book was released on 2021-11-21 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.
Download or read book Foundations of Materials Science and Engineering written by William F. Smith and published by . This book was released on 2011 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smith/Hashemi's Foundations of Materials Science and Engineering, 5/e provides an eminently readable and understandable overview of engineering materials for undergraduate students. This edition offers a fully revised chemistry chapter and a new chapter on biomaterials as well as a new taxonomy for homework problems that will help students and instructors gauge and set goals for student learning. Through concise explanations, numerous worked-out examples, a wealth of illustrations & photos, and a brand new set of online resources, the new edition provides the most student-friendly introduction to the science & engineering of materials. The extensive media package available with the text provides Virtual Labs, tutorials, and animations, as well as image files, case studies, FE Exam review questions, and a solutions manual and lecture PowerPoint files for instructors.
