Download or read book Applied Mechanics for Engineers written by C. B. Smith and published by Elsevier. This book was released on 2013-10-22 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Mechanics for Engineers, Volume 1 provides an introduction to mechanics applied to engineering. The worked examples correspond to the first year of the Ordinary National Certificate in Engineering, which are supported with theories discussed in this book. The calculations in this text have all been made with the assistance of a slide rule and it is recommended that the reader acquire a slide rule to make full use of this publication. The topics covered include forces and moments; beams, shear force, and bending moment diagrams; velocity and acceleration; friction; and work, power, and energy. The gas laws; vapors, steam-engine, and boiler; and internal combustion engines are also deliberated in this text. This volume is valuable to engineering students, as well as researchers conducting work on applied mechanics.
Download or read book A text book of applied mechanics and engineering written by A. Jamieson and published by . This book was released on 1916 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rational and Applied Mechanics written by Nikolai Nikolaevich Polyakhov and published by Springer Nature. This book was released on 2021-08-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available for the first time in English, this two-volume course on theoretical and applied mechanics has been honed over decades by leading scientists and teachers, and is a primary teaching resource for engineering and maths students at St. Petersburg University. The course addresses classical branches of theoretical mechanics (Vol. 1), along with a wide range of advanced topics, special problems and applications (Vol. 2). This first volume of the textbook contains the parts “Kinematics” and “Dynamics”. The part “Kinematics” presents in detail the theory of curvilinear coordinates which is actively used in the part “Dynamics”, in particular, in the theory of constrained motion and variational principles in mechanics. For describing the motion of a system of particles, the notion of a Hertz representative point is used, and the notion of a tangent space is applied to investigate the motion of arbitrary mechanical systems. In the final chapters Hamilton-Jacobi theory is applied for the integration of equations of motion, and the elements of special relativity theory are presented. This textbook is aimed at students in mathematics and mechanics and at post-graduates and researchers in analytical mechanics.
Download or read book A Text Book of Applied Mechanics and Mechanical Engineering Volume 1 written by Andrew Jamieson and published by Arkose Press. This book was released on 2015-11-03 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book A Text Book of Applied Mechanics and Mechanical Engineering Volume 1 written by Andrew Jamieson and published by Palala Press. This book was released on 2015-08-31 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book A Text Book of Applied Mechanics and Mechanical Engineering written by Andrew Jamieson and published by Sagwan Press. This book was released on 2015-08-25 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Advances in Applied Mechanics written by and published by Academic Press. This book was released on 1962-01-01 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Applied Mechanics
Download or read book A Text book on Applied Mechanics written by Andrew Jamieson and published by . This book was released on 1895 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Mechanics 1 written by Dietmar Gross and published by Springer Science & Business Media. This book was released on 2012-08-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statics is the first volume of a three-volume textbook on Engineering Mechanics. The authors, using a time-honoured straightforward and flexible approach, present the basic concepts and principles of mechanics in the clearest and simplest form possible to advanced undergraduate engineering students of various disciplines and different educational backgrounds. An important objective of this book is to develop problem solving skills in a systematic manner. Another aim of this volume is to provide engineering students as well as practising engineers with a solid foundation to help them bridge the gap between undergraduate studies on the one hand and advanced courses on mechanics and/or practical engineering problems on the other. The book contains numerous examples, along with their complete solutions. Emphasis is placed upon student participation in problem solving. The contents of the book correspond to the topics normally covered in courses on basic engineering mechanics at universities and colleges. Now in its second English edition, this material has been in use for two decades in Germany, and has benefited from many practical improvements and the authors’ teaching experience over the years. New to this edition are the extra supplementary examples available online as well as the TM-tools necessary to work with this method.
Download or read book Applied Engineering Mechanics written by Boothroyd and published by Routledge. This book was released on 2018-05-04 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the more practical approach to engineering mechanics that deals mainly withtwo-dimensional problems, since these comprise the great majority of engineering situationsand are the necessary foundation for good design practice. The format developedfor this textbook, moreover, has been devised to benefit from contemporary ideas ofproblem solving as an educational tool. In both areas dealing with statics and dynamics,theory is held apart from applications, so that practical engineering problems, whichmake use of basic theories in various combinations, can be used to reinforce theoryand demonstrate the workings of static and dynamic engineering situations.In essence a traditional approach, this book makes use of two-dimensional engineeringdrawings rather than pictorial representations. Word problems are included in the latterchapters to encourage the student's ability to use verbal and graphic skills interchangeably.SI units are employed throughout the text.This concise and economical presentation of engineering mechanics has been classroomtested and should prove to be a lively and challenging basic textbook for two onesemestercourses for students in mechanical and civil engineering. Applied EngineeringMechanics: Statics and Dynamics is equally suitable for students in the second or thirdyear of four-year engineering technology programs.
Download or read book Rational and Applied Mechanics written by Nikolai Nikolaevich Polyakhov and published by Springer. This book was released on 2021-04-13 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available for the first time in English, this two-volume course on theoretical and applied mechanics has been honed over decades by leading scientists and teachers, and is a primary teaching resource for engineering and maths students at St. Petersburg University. The course addresses classical branches of theoretical mechanics (Vol. 1), along with a wide range of advanced topics, special problems and applications (Vol. 2). This first volume of the textbook contains the parts “Kinematics” and “Dynamics”. The part “Kinematics” presents in detail the theory of curvilinear coordinates which is actively used in the part “Dynamics”, in particular, in the theory of constrained motion and variational principles in mechanics. For describing the motion of a system of particles, the notion of a Hertz representative point is used, and the notion of a tangent space is applied to investigate the motion of arbitrary mechanical systems. In the final chapters Hamilton-Jacobi theory is applied for the integration of equations of motion, and the elements of special relativity theory are presented. This textbook is aimed at students in mathematics and mechanics and at post-graduates and researchers in analytical mechanics.
Download or read book A Text Book of Applied Mechanics and Mechanical Engineering Volume 1 Primary Source Edition written by Andrew Jamieson and published by Nabu Press. This book was released on 2013-09 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the imperfections, have elected to bring it back into print as part of our continuing commitment to the preservation of printed works worldwide. We appreciate your understanding of the imperfections in the preservation process, and hope you enjoy this valuable book.
Download or read book A Text Book on Applied Mechanics Vol 1 Classic Reprint written by Andrew Jamieson and published by Forgotten Books. This book was released on 2017-07-23 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Text-Book on Applied Mechanics, Vol. 1 In every part of the subject a number of examples have been fully worked out, and at the end of each Lecture 3. Series of carefully selected questions has been arranged in the precise order of, and relating solely to, the subject matter of the Lecture, so that teachers and students may have a minimum of trouble in finding suitable examples. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Basic Engineering Mechanics Explained Volume 1 written by and published by . This book was released on 2019-02-19 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of three volumes aims to explain in a reader-friendly way, the essential principles of basic mechanics as used in engineering. It attempts to provide clarity, motivation and relevance, for any reader who wants to understand the principles of mechanics and be able to apply them to practical situations. BEME should be found useful by anyone studying, teaching or using the science of mechanics.Volume 1 Contents:What mechanics is about and why we study it,Concepts, quantities, principles and laws,Working with numbers in engineering,Forces, components, and resultants,Moments, equilibrium and free-body diagrams,Centres of gravity and centroids,Forces in structures: trusses and frames,Friction between dry solid surfaces,Buoyancy.
Download or read book A Textbook of Applied Mechanics written by Rajput R K and published by Laxmi Publications. This book was released on 1988 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Text Book on Applied Mechanics Vol 1 written by Andrew Jamieson and published by Forgotten Books. This book was released on 2015-06-26 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Text-Book on Applied Mechanics, Vol. 1: Specially Arranged for the Use of Science and Arts, City and Guilds of London Institute, and Other Engineering Students This Text-Book has been written expressly for Second and Third Year Students of Applied Mechanics. It, therefore, forms a suitable companion to the Author's Text-Book on Steam and Steam Engines. It also forms a direct continuation of his Elementary Manual on Applied Mechanics; for it covers the Advanced Stage of the Science and Art Departments Examinations, and treats on many points demanded by the Honours Section. It will, moreover, be found of considerable use to those who aim at passing the Advanced and Honours Stages of the same Examinations in Machine Construction and Drawing, as well as the Examinations of the City and Guilds of London Institute in Mechanical Engineering. At the same time, the treatment of the subject is sufficiently general to satisfy the wants of other engineering students who do not happen to have these Special Examinations in view. The book has been divided into six parts:- I. The Principle of Work and its Applications. II. Gearing. III. Motion and Energy. IV. Strength of Materials. V. Graphic Statics. VI. Hydraulics and Hydraulic Machinery. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book A Text Book on Applied Mechanics Vol 1 written by Andrew Jamieson and published by Forgotten Books. This book was released on 2017-10-26 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Text-Book on Applied Mechanics, Vol. 1: Specially Arranged for the Use of Science and Art, City and Guilds of London Institute, and Other Engineering Students Great stress has been laid on principles, definitions, and uniformity of notation and symbols, The explanations, illustrations, and examples are such as will enable students to apply leading principles to practical work. In most instances direct reference has been made by footnotes to the latest and best books and to papers read before the leading Engineering Societies at home and abroad. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
