Download or read book A Study on the Relationship Between the Dynamic Factor and the Dynamic Transmission Error of Spur Gear Pairs written by Venkata Krishna Tamminana and published by . This book was released on 2005 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Power Transmission systems are widely used in automotive and aerospace industries. These systems are often operated under relatively high rotational speeds and hence their dynamic behavior, especially its impact on the gears, becomes a relevant issue. Dynamic behavior of gear systems is important for two main reasons: durability and noise. In this study, two different dynamic models, a finite elements-based deformable-body model and a simplified discrete model, are developed to predict dynamic behavior of spur gear pairs. The deformable-body model will have the ability to predict both DTE and DF based on mesh and tooth forces as well as dynamic gear tooth bending stresses. The discrete model will rely on the deformable-body model for computation of gear mesh parameters under quasi-static conditions and will predict both DTE and DF based on mesh and tooth forces. Dynamic transmission error (DTE) and dynamic factors (DF) defined based on the gear mesh loads, tooth loads and bending stresses are computed for a number of unmodified and modified spur gears within a wide range of rotational speed for different involute contact ratios and torques. Both models are validated by comparing their DTE predictions with experimental data obtained from a set of tests using spur gear having unmodified and modified tooth profiles. The predicted Dc DF and DTE values are related to each other through simplified formulas. Impact of nonlinear behavior such as tooth separations and jump discontinuities on DF is also quantified.

Download or read book Nonlinear Dynamics Volume 1 written by Gaetan Kerschen and published by Springer. This book was released on 2017-05-03 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Dynamics, Volume 1: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics, 2017, the first volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Nonlinear Dynamics, including papers on: Nonlinear System Identification Nonlinear Modeling & Simulation Nonlinear Reduced-order Modeling Nonlinearity in Practice Nonlinearity in Aerospace Systems Nonlinearity in Multi-Physics Systems Nonlinear Modes and Modal Interactions Experimental Nonlinear Dynamics

Download or read book An Experimental Investigation of the Effect of Spacing Errors on the Loaded Transmission Error of Spur Gear Pairs written by Brian Anichowski (Jr.) and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper complements recent investigations [Handschuh et al. (2014), Talbot et al. (2016)] of the influences of tooth indexing errors on dynamic factors of spur gears by presenting data on changes to the dynamic transmission error. An experimental study is performed using an accelerometer-based dynamic transmission error measurement system incorporated into a high-speed gear tester to establish baseline dynamic behavior of gears having negligible indexing errors, and to characterize changes to this baseline due to application of tightly-controlled intentional indexing errors. Spur gears having different forms of indexing errors are paired with a gear having negligible indexing error. Dynamic transmission error of gear pairs under these error conditions is measured and examined in both time and frequency domains to quantify the transient effects induced by these indexing errors. These measurements are then compared against the baseline, no error condition, as a means to quantify the dynamic vibratory behavior induced due to the tooth indexing errors. These comparisons between measurements indicate clearly that the baseline dynamic response, dominated by well-defined resonance peaks and mesh harmonics, are complemented by non-mesh orders of transmission error due the transient behavior induced by indexing errors. In addition, the tooth (or teeth) having indexing error imparts transient effects which dominate the vibratory response of the system for significantly more mesh cycles than the teeth having errors are in contact. For this reason, along with the results presented in Talbot et al. (2016), it was concluded that spur gears containing indexing errors exhibit significant deviations from nominal behavior, at both a system and time-domain level.

Download or read book Symmetry in Mechanical Engineering written by Adam Glowacz and published by MDPI. This book was released on 2020-06-03 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advancements in mechanical engineering are an essential topic for discussion. The topics relating to mechanical engineering include the following: measurements of signals of shafts, springs, belts, bearings, gears, rotors, machine elements, vibration analysis, acoustic analysis, fault diagnosis, construction, analysis of machine operation, analysis of smart-material systems, integrated systems, stresses, analysis of deformations, analysis of mechanical properties, signal processing of mechanical systems, and rotor dynamics. Mechanical engineering deals with solid and fluid mechanics, rotation, movements, materials, and thermodynamics. This book, with 15 published articles, presents the topic “Symmetry in Mechanical Engineering”. The presented topic is interesting. It is categorized into eight different sections: Deformation; Stresses; Mechanical properties; Tribology; Thermodynamic; Measurement; Fault diagnosis; Machine. The development of techniques and methods related to mechanical engineering is growing every month. The described articles have made a contribution to mechanical engineering. The proposed research can find applications in factories, oil refineries, and mines. It is essential to develop new improved methods, techniques, and devices related to mechanical engineering.

Download or read book Vibration Engineering written by Nitesh P. Yelve and published by CRC Press. This book was released on 2024-05-15 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration Engineering presents recent developments in the field of engineering, encompassing industrial norms, applications within the finite element method, infrastructure safety assessment, and active vibration control strategies. It offers a study in seismic vibration control and analysis for building structures and liquid storage tanks. Spanning across the multiple domains of vibration engineering, the book highlights machinery diagnostics, modal analysis, energy harvesting, balancing, vibration isolation, and human-vibration interaction. It discusses experimental fault identification in journal bearings using vibration-based methods. This book also considers advances in vibration-based structural health monitoring of civil infrastructures. This book will be a useful reference for industry professionals and engineers facing challenges while dealing with the vibrations in the fields of mechanical, aerospace, structural, and civil engineering.

Download or read book International Gear Conference 2014 26th 28th August 2014 Lyon written by Philippe Velex and published by Chandos Publishing. This book was released on 2014-09-18 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Gear Conference 2014, held in Lyon, 26th-28th August 2014. Mechanical transmission components such as gears, rolling element bearings, CVTs, belts and chains are present in every industrial sector and over recent years, increasing competitive pressure and environmental concerns have provided an impetus for cleaner, more efficient and quieter units. Moreover, the emergence of relatively new applications such as wind turbines, hybrid transmissions and jet engines has led to even more severe constraints. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and range of applications (aerospace, automotive, wind turbine, and others) including topical issues such as power losses and efficiency, gear vibrations and noise, lubrication, contact failures, tribo-dynamics and nano transmissions. - A truly international contribution with more than 120 papers from all over the world - A judicious balance between fundamental research and industrial concerns - Participation of the most respected international experts in the field of gearing - A wide range of applications in terms of size, power, speed, and industrial sector

Download or read book Journal of Mechanical Design written by and published by . This book was released on 2008 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Transmissions written by Datong Qin and published by CRC Press. This book was released on 2016-11-10 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Conference on Power Transmissions 2016, held in Chongqing, China, 27th-30th October 2016. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and a range of applications. The presented papers are catalogued into three main tracks, including design, simulation and testing, materials and manufacturing, and industrial applications. The design, simulation and testing track covers topics such as new methods and designs for all types of transmissions, modelling and simulation of power transmissions, strength, fatigue, dynamics and reliability of power transmissions, lubrication and sealing technologies and theories, and fault diagnosis of power transmissions. In the materials and manufacturing track, topics include new materials and heat treatment of power transmissions, new manufacturing technologies of power transmissions, improved tools to predict future demands on production systems, new technologies for ecologically sustainable productions and those which preserve natural resources, and measuring technologies of power transmissions. The proceedings also cover the novel industrial applications of power transmissions in marine, aerospace and railway contexts, wind turbines, the automotive industry, construction machinery, and robots.

Download or read book Design and Modeling of Mechanical Systems V written by Lassaad Walha and published by Springer Nature. This book was released on 2022-08-19 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 9th International Congress on Design and Modeling of Mechanical Systems (CMSM’2021), held on December 20-22, 2021, in Hammamet, Tunisia. It reports on research findings, advanced methods and industrial applications relating to mechanical systems, materials and structures, and machining. It covers vibration analysis, CFD modeling and simulation, intelligent monitoring and control, including applications related to industry 4.0 and additive manufacturing. Continuing on the tradition of the previous editions, and with a good balance of theory and practice, the book offers a timely snapshot, and a useful resource for both researchers and professionals in the field of design and modeling of mechanical systems.

Download or read book Control and Nonlinear Dynamics on Energy Conversion Systems written by Herbert Ho-Ching Iu and published by MDPI. This book was released on 2019-07-01 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ever-increasing need for higher efficiency, smaller size, and lower cost make the analysis, understanding, and design of energy conversion systems extremely important, interesting, and even imperative. One of the most neglected features in the study of such systems is the effect of the inherent nonlinearities on the stability of the system. Due to these nonlinearities, these devices may exhibit undesirable and complex dynamics, which are the focus of many researchers. Even though a lot of research has taken place in this area during the last 20 years, it is still an active research topic for mainstream power engineers. This research has demonstrated that these systems can become unstable with a direct result in increased losses, extra subharmonics, and even uncontrollability/unobservability. The detailed study of these systems can help in the design of smaller, lighter, and less expensive converters that are particularly important in emerging areas of research like electric vehicles, smart grids, renewable energy sources, and others. The aim of this Special Issue is to cover control and nonlinear aspects of instabilities in different energy conversion systems: theoretical, analysis modelling, and practical solutions for such emerging applications. In this Special Issue, we present novel research works in different areas of the control and nonlinear dynamics of energy conversion systems.

Download or read book Advances in Acoustics and Vibration III written by Nabih Feki and published by Springer Nature. This book was released on 2021-05-29 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Third International Conference on Acoustics and Vibration (ICAV2021), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held online on March 15-16, 2021, from Sfax, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.

Download or read book Topics in Modal Analysis Testing Volume 9 written by Michael Mains and published by Springer. This book was released on 2018-07-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Modal Analysis & Testing, Volume 9: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics, 2018, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Modal Analysis, including papers on: Operational Modal & Modal Analysis Applications Experimental Techniques Modal Analysis, Measurements & Parameter Estimation Modal Vectors & Modeling Basics of Modal Analysis Additive Manufacturing & Modal Testing of Printed Parts

Download or read book Dynamics and Fault Diagnosis of Nonlinear Rotors and Impellers written by Jiazhong Zhang and published by Springer Nature. This book was released on 2022-04-28 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume presents recent developments in nonlinear dynamics applied to engineering. Specifically, the authors address stability and bifurcation in large-scale, complex rotor dynamic systems; periodic motions and their bifurcations in nonlinear circuit systems, fault diagnosis of complex engineering systems with nonlinear approaches, singularities in fluid-machinery and bifurcation analysis, nonlinear behaviors in rotor dynamic system with multi-mistuned blades, mode localization induced by mistuning in impellers with periodical and cyclic symmetry, and nonlinear behaviors in fluid-structure interaction and their control. These new results will maximize reader understand on the recent progress in nonlinear dynamics applied to large-scale, engineering systems in general and nonlinear rotors and impellers in particular.

Download or read book Proceedings of the International Power Transmission and Gearing Conference written by and published by . This book was released on 1992 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Conference Machinery Electronics and Control Simulation written by Li Wang and published by Trans Tech Publications Ltd. This book was released on 2014-09-26 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the the International Conference on Machinery, Electronics and Control Simulation (ICMECS 2014), September 27-28, 2014, Weihai, Shandong Province, China. The 146 papers are grouped as follows: Chapter 1: Dynamics and Mechanical Engineering, Applied Mechanics, Chapter 2: Materials Engineering and Processing, Chapter 3: Mine Engineering, Flow and Ventilation, Thermal Transfer and Effects, Chapter 4: Power and Electrical Engineering, Chapter 5: Control Systems, Mechatronics and Robotics, Chapter 6: Electronics, Embedded and Integrated Circuits, Smart Grid Technologies, Chapter 7: Measurements, Testing, Tracking, Detection and Monitoring, Evaluation, Chapter 8: Signal, Noise, Image Processing, Computational Mathematics and Methods, Chapter 9: Communication, Networks and Information Technologies, Chapter 10: Product Design, Manufacturing and Industrial Engineering, Chapter 11: Civil Engineering and Geoengineering, Chapter 12: Earth Science and Cosmology, Environmental Engineering

Download or read book Using Dynamic Analysis for Compact Gear Design written by and published by . This book was released on 1998 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents procedures for designing compact spur gear sets with the objective of minimizing the gear size. The allowable tooth stress and dynamic response are incorporated in the process to obtain a feasible design region. Various dynamic rating factors were investigated and evaluated. The constraints of contact stress limits and involute interference combined with the tooth bending strength provide the main criteria for this investigation. A three-dimensional design space involving the gear size, diametral pitch, and operating speed was developed to illustrate the optimal design of spur gear pairs. The study performed here indicates that as gears operate over a range of speeds, variations in the dynamic response change the required gear size in a trend that parallels the dynamic factor. The dynamic factors are strongly affected by the system natural frequencies. The peak values of the dynamic factor within the operating speed range significantly influence the optimal gear designs. The refined dynamic factor introduced in this study yields more compact designs than AGMA dynamic factors.

Download or read book An Experimental Study of the Dynamic Response of Spur Gears Having Tooth Index Errors written by Allen Y. Sun and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: While there are numerous theoretical and experimental investigations of dynamic behavior of gear pairs of higher quality grades, very little is known about the same when certain classes of manufacturing errors are present. This study aims at investigating the effects of tooth index errors, one of the most common types of manufacturing errors. Using the changes in stresses along the tooth root regions as the metric, an experimental study is executed here to (i) establish a baseline dynamic behavior under no tangible index error and (ii) characterize the changes caused by tightly-controlled intentional index errors to this baseline dynamic behavior. For this, various gears having different forms of index errors are paired with an instrumented gear having no such errors. For each gear pair, tests are performed within wide ranges of torque and speed. A data processing scheme is proposed to normalize the measured stress signals to multiplication factor. It is shown that the baseline dynamic response represented solely by the dynamic stress factor is altered significantly by transient vibrations induced by the indexing errors, in some cases fully altering the baseline dynamic behavior and increasing the stress multiplication factors significantly. The experimental database formed in this study is expected to guide much needed theoretical studies on this topic.