Download or read book A Study of the Inductance of Four terminal Resistance Standards written by Francis Briggs Silsbee and published by . This book was released on 1917 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study of the Inductance of Four Terminal Resistance Standards Classic Reprint written by Francis B. Silsbee and published by Forgotten Books. This book was released on 2016-10-13 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Study of the Inductance of Four-Terminal Resistance Standards When the shunts R - ls and RX are not of equal resistance the second balance may be obtained in either of two ways. First, by simply increasing R2, and, second, by changing the primary connections of the transformer from parallel to series. By making both these changes, shunts of very different resistance can be directly com pared. The assumption made in the second method, 'that the phase angle of a well-designed transformer is a function of the secondary circuit conditions only, has been repeatedly justified by measurements at the Bureau of Standards. As a further check, shunts E and H having and ohm, respectively, were compared by the two methods. The results given in Table 1 show an excellent agreement. Similar measurements at 700 cycles also agreed, showing that up to that frequency the electrostatic capacity between the windings. Does not affect the accuracy of the method. It is to be noted that by changing connections both shunts are kept at approximately their full current capacity and thus there is no loss of sensitivity if these capacities are different. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book A Study of the inductance of four terminal resistance standards written by Francis Briggs Silsbee and published by . This book was released on 1916 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study of the Inductance of Four terminal Resistance Standards by Francis B Silsbee written by Francis B. Silsbee and published by . This book was released on 1916 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Notes on the Design of 4 Terminal Resistance Standards for Alternating Currents Classic Reprint written by Francis B. Silsbee and published by Forgotten Books. This book was released on 2017-10-27 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Notes on the Design of 4-Terminal Resistance Standards for Alternating Currents In considering problems involving the characteristics of 4-terminal resistors, two very general principles are often of great value. The first of these is the reciprocal theorem5 which states that if current is passed through terminals 3 and 4 and the resulting electromotive force, is observed at terminals 1 and 2 the resistance and inductance will have the same numerical values as if the converse Choice of terminals had been made and the electromotive force had been observed at 3 and 4 when current was passing through 1 and 2. This theorem is exceedingly convenient in discussing the inductance of complicated groups of conductors, since that pair of terminals can be considered as current terminals which yields the simplest set of stream lines and equipotential surfaces. The second useful conception is that of regarding the two possible current paths (that through 1 and 2 and that through 3 and 4) as separate and distinct circuits, which can be called the current cir cuit and the potential circuit, respectively. The self-inductance of the complete resistor then becomes the same as the mutual induc tance between the two circuits so visualized. The fact that through out part of their volumes the two circuits coincide in space does not affect the argument. When regarded as a mutual inductance, it is easier to see that the total inductance is the algebraic sum of the mutual actions of the several parts of the one circuit upon those of the other. The effect of an external stray field on the resistor can be considered as a mutual inductance between the potential circuit and the circuit which produces the external field. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Four Terminal Conductor and the Thomson Bridge Classic Reprint written by Frank Wenner and published by Forgotten Books. This book was released on 2016-09-25 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Four-Terminal Conductor and the Thomson Bridge With the current entering at I and leaving at 4, 2 may be either at a higher or at a lower potential than 3. The resistance 2-4 may therefor be either positive or negative. AS the notion of Sign is foreign to our usual conception of resistance, we may, if we wish, consider it as associated with the drop in potential and with the direction of the current. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book University Physics written by Samuel J. Ling and published by . This book was released on 2017-12-19 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: University Physics is designed for the two- or three-semester calculus-based physics course. The text has been developed to meet the scope and sequence of most university physics courses and provides a foundation for a career in mathematics, science, or engineering. The book provides an important opportunity for students to learn the core concepts of physics and understand how those concepts apply to their lives and to the world around them. Due to the comprehensive nature of the material, we are offering the book in three volumes for flexibility and efficiency. Coverage and Scope Our University Physics textbook adheres to the scope and sequence of most two- and three-semester physics courses nationwide. We have worked to make physics interesting and accessible to students while maintaining the mathematical rigor inherent in the subject. With this objective in mind, the content of this textbook has been developed and arranged to provide a logical progression from fundamental to more advanced concepts, building upon what students have already learned and emphasizing connections between topics and between theory and applications. The goal of each section is to enable students not just to recognize concepts, but to work with them in ways that will be useful in later courses and future careers. The organization and pedagogical features were developed and vetted with feedback from science educators dedicated to the project. VOLUME II Unit 1: Thermodynamics Chapter 1: Temperature and Heat Chapter 2: The Kinetic Theory of Gases Chapter 3: The First Law of Thermodynamics Chapter 4: The Second Law of Thermodynamics Unit 2: Electricity and Magnetism Chapter 5: Electric Charges and Fields Chapter 6: Gauss's Law Chapter 7: Electric Potential Chapter 8: Capacitance Chapter 9: Current and Resistance Chapter 10: Direct-Current Circuits Chapter 11: Magnetic Forces and Fields Chapter 12: Sources of Magnetic Fields Chapter 13: Electromagnetic Induction Chapter 14: Inductance Chapter 15: Alternating-Current Circuits Chapter 16: Electromagnetic Waves
Download or read book The Potentiometer Handbook written by Carl David Todd and published by McGraw-Hill Companies. This book was released on 1975 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IRE Transactions on Circuit Theory written by and published by . This book was released on 1957 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Op Amps for Everyone written by Ron Mancini and published by Newnes. This book was released on 2003 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The operational amplifier ("op amp") is the most versatile and widely used type of analog IC, used in audio and voltage amplifiers, signal conditioners, signal converters, oscillators, and analog computing systems. Almost every electronic device uses at least one op amp. This book is Texas Instruments' complete professional-level tutorial and reference to operational amplifier theory and applications. Among the topics covered are basic op amp physics (including reviews of current and voltage division, Thevenin's theorem, and transistor models), idealized op amp operation and configuration, feedback theory and methods, single and dual supply operation, understanding op amp parameters, minimizing noise in op amp circuits, and practical applications such as instrumentation amplifiers, signal conditioning, oscillators, active filters, load and level conversions, and analog computing. There is also extensive coverage of circuit construction techniques, including circuit board design, grounding, input and output isolation, using decoupling capacitors, and frequency characteristics of passive components. The material in this book is applicable to all op amp ICs from all manufacturers, not just TI. Unlike textbook treatments of op amp theory that tend to focus on idealized op amp models and configuration, this title uses idealized models only when necessary to explain op amp theory. The bulk of this book is on real-world op amps and their applications; considerations such as thermal effects, circuit noise, circuit buffering, selection of appropriate op amps for a given application, and unexpected effects in passive components are all discussed in detail. *Published in conjunction with Texas Instruments *A single volume, professional-level guide to op amp theory and applications *Covers circuit board layout techniques for manufacturing op amp circuits.
Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.
Download or read book Systems of Electrical Units written by Francis Briggs Silsbee and published by . This book was released on 1962 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: The various systems of measurement, with their respective sets of units, used in the literature on electricity and magnetism are described in detail. Their historical development is summarized. The manner in which each is derived from either of the two alternative points of view of the experimentalist and the theoretician is compared and contrasted. The desirability of recognizing both points of view in international standardization, particularly when discussing rationalization, is pointed out. The present status of the absolute measurements on which all electrical units are based is reported, and tables are included for the conversion of equations and numerical values from one system to another.
Download or read book A Century of Excellence in Measurements Standards and Technology written by David R. Lide and published by CRC Press. This book was released on 2001-10-30 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Established by Congress in 1901, the National Bureau of Standards (NBS), now the National Institute of Standards and Technology (NIST), has a long and distinguished history as the custodian and disseminator of the United States' standards of physical measurement. Having reached its centennial anniversary, the NBS/NIST reflects on and celebrates its first century with this book describing some of its seminal contributions to science and technology. Within these pages are 102 vignettes that describe some of the Institute's classic publications. Each vignette relates the context in which the publication appeared, its impact on science, technology, and the general public, and brief details about the lives and work of the authors. The groundbreaking works depicted include: A breakthrough paper on laser-cooling of atoms below the Doppler limit, which led to the award of the 1997 Nobel Prize for Physics to William D. Phillips The official report on the development of the radio proximity fuse, one of the most important new weapons of World War II The 1932 paper reporting the discovery of deuterium in experiments that led to Harold Urey's1934 Nobel Prize for Chemistry A review of the development of the SEAC, the first digital computer to employ stored programs and the first to process images in digital form The first paper demonstrating that parity is not conserved in nuclear physics, a result that shattered a fundamental concept of theoretical physics and led to a Nobel Prize for T. D. Lee and C. Y. Yang "Observation of Bose-Einstein Condensation in a Dilute Atomic Vapor," a 1995 paper that has already opened vast new areas of research A landmark contribution to the field of protein crystallography by Wlodawer and coworkers on the use of joint x-ray and neutron diffraction to determine the structure of proteins
Download or read book Lumped Elements for RF and Microwave Circuits Second Edition written by Inder J. Bahl and published by Artech House. This book was released on 2022-12-31 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated and including entirely new chapters, this Second Edition provides in-depth coverage of the different types of RF and microwave circuit elements, including inductors, capacitors, resistors, transformers, via holes, airbridges, and crossovers. Featuring extensive formulas for lumped elements, design trade-offs, and an updated and current list of references, the book helps you understand the value and usefulness of lumped elements in the design of RF, microwave and millimeter wave components and circuits. You’ll find a balanced treatment between standalone lumped elements and their circuits using MICs, MMICs and RFICs technologies. You’ll also find detailed information on a broader range RFICs that was not available when the popular first edition was published. The book captures – in one consolidated volume -- the fundamentals, equations, modeling, examples, references and overall procedures to design, test and produce microwave components that are indispensable in industry and academia today. With its superb organization and expanded coverage of the subject, this is a must-have, go-to resource for practicing engineers and researchers in industry, government and university and microwave engineers working in the antenna area. Students will also find it a useful reference with its clear explanations, many examples and practical modeling guidelines.
Download or read book High speed Digital Design written by Howard W. Johnson and published by . This book was released on 1993-01-01 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on the field of knowledge lying between digital and analog circuit theory, this new text will help engineers working with digital systems shorten their product development cycles and help fix their latest design problems. The scope of the material covered includes signal reflection, crosstalk, and noise problems which occur in high speed digital machines (above 10 megahertz). This volume will be of practical use to digital logic designers, staff and senior communications scientists, and all those interested in digital design.
Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2018-09-03 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weighing in on the growth of innovative technologies, the adoption of new standards, and the lack of educational development as it relates to current and emerging applications, the third edition of Introduction to Instrumentation and Measurements uses the authors’ 40 years of teaching experience to expound on the theory, science, and art of modern instrumentation and measurements (I&M). What’s New in This Edition: This edition includes material on modern integrated circuit (IC) and photonic sensors, micro-electro-mechanical (MEM) and nano-electro-mechanical (NEM) sensors, chemical and radiation sensors, signal conditioning, noise, data interfaces, and basic digital signal processing (DSP), and upgrades every chapter with the latest advancements. It contains new material on the designs of micro-electro-mechanical (MEMS) sensors, adds two new chapters on wireless instrumentation and microsensors, and incorporates extensive biomedical examples and problems. Containing 13 chapters, this third edition: Describes sensor dynamics, signal conditioning, and data display and storage Focuses on means of conditioning the analog outputs of various sensors Considers noise and coherent interference in measurements in depth Covers the traditional topics of DC null methods of measurement and AC null measurements Examines Wheatstone and Kelvin bridges and potentiometers Explores the major AC bridges used to measure inductance, Q, capacitance, and D Presents a survey of sensor mechanisms Includes a description and analysis of sensors based on the giant magnetoresistive effect (GMR) and the anisotropic magnetoresistive (AMR) effect Provides a detailed analysis of mechanical gyroscopes, clinometers, and accelerometers Contains the classic means of measuring electrical quantities Examines digital interfaces in measurement systems Defines digital signal conditioning in instrumentation Addresses solid-state chemical microsensors and wireless instrumentation Introduces mechanical microsensors (MEMS and NEMS) Details examples of the design of measurement systems Introduction to Instrumentation and Measurements is written with practicing engineers and scientists in mind, and is intended to be used in a classroom course or as a reference. It is assumed that the reader has taken core EE curriculum courses or their equivalents.
Download or read book Small signal stability control and dynamic performance of power systems written by M.J Gibbard and published by University of Adelaide Press. This book was released on 2015-07-15 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough and exhaustive presentation of theoretical analysis and practical techniques for the small-signal analysis and control of large modern electric power systems as well as an assessment of their stability and damping performance.
