Download or read book A Study of the Fatigue of Tool Steels Having a Surface Coating written by S. S. KRUGLIKOV and published by . This book was released on 1961 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: CONCLUSIONS: The fatigue strength of chrome tool steel is substantially reduced as a result of applying a metallic coating by spraying, dipping, or electrolysis. The decrease occurs before and after holding the steel at an elevated temperature. Shot-peening or nitriding the surface of steel prior to application of a coating considerably increases the fatigue strength of the coated specimens. This effect also occurs after holding the coated specimens at elevated temperatures. Aluminum-silicon paint does not substantially effect the fatigue of steel. (Author).

Download or read book Lifetime Controlling Defects in Tool Steels written by Christian Rudolf Sohar and published by Springer Science & Business Media. This book was released on 2011-08-12 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis Christian Sohar describes his investigation into the gigacycle fatigue behavior of tool steels. In an interdisciplinary approach he uses knowledge and methods from a wide variety of disciplines including materials science, metallurgy, chemistry, physics and mechanical engineering. Christian gives a general introduction into steel tools and fatigue in materials. Later he extensively discusses the experimental techniques and results. Indeed it is the detail of the content in this thesis which makes it an invaluable resource for students entering the field and scientists working in related disciplines. Overall, the thesis helps us understand more about the mechanical behavior of metallic materials with complex microstructure and high hardness.

Download or read book Technical Translations written by and published by . This book was released on 1962 with total page 1326 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book U S Government Research Reports written by and published by . This book was released on 1963 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Abstract Bulletin written by Defense Documentation Center (U.S.) and published by . This book was released on 1961-07 with total page 1766 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ACRID 2017 written by Edward Chikuni and published by European Alliance for Innovation. This book was released on 2018-06-04 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conference Theme was: "Moving Africa forward through Engineering, Technology and Innovation". The conference brought together academics, researchers and industrialists from many disciplines, in particular those that have the most impact on Africa's Development. Most conferences on the continent have covered limited disciplines and therefore the opportunity has been lost sharing information, results and knowledge in a way which can solve the many contentious issues, most of which can be solved through a multidisciplinary approach.

Download or read book An Investigation of the Effect of a Coating of Petroleum Derivative Oils on the Fatigue Life of an Oil Hardened Tool Steel written by Navnit M. Panchal and published by . This book was released on 1969 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Finishing Abstracts written by and published by . This book was released on 1972 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Welding Joining and Coating of Metallic Materials written by Michael Zinigrad and published by MDPI. This book was released on 2020-12-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of state-of-the-art research works in the field of materials science. Specifically, the works deal with issues related to the welding, joining and coating of metallic materials. These methods are known as main processes in the field of metallurgy, and are usually applied in order to solve complex problems of joining metals or the fabrication of metallic surfaces with required properties and performance. The focus of this book is on metals such as aluminum, magnesium, titanium, various types of steel, intermetallics and shape memory alloys. These scientific works address microstructural evaluation, as well as the performance of the produced joints and coatings. Scientists from all over the globe have presented novel advances and possible solutions for metallic materials joints and coatings for applications in the automotive, aerospace, chemical and medical industries, among others.

Download or read book Tool Steel Pacification and Heat Treatment of Wear Resistance Steel and D3 Steel written by MFAROUK -Mohamed Farouk Ahmed and published by MFAROUK - Mohamed Farouk Ahmed. This book was released on 2018-07-15 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is study on tool steel pacification and heat-treatment for all type of wear resistance steel and specially our D3 steel. Supported with value review. This research “theoretical and experimental” in Effect of Heat-treatment “hardening temperature, tempering temperature, and cooling rate“ in the Mechanical property “Hardness”, and Microstructure transformation on Tool Steel, all type of wear resistance steel, and specially D3 steel. The research study heat-treatment for two pieces of D3 die steel "Working at cone pulleys for nail manufacture" to modify there mechanical properties. The classification its type, properties and set on condition effect on it was discussed. Two set of experiments were done one to determine the effect of austenitization temperature and tempering temperature on the mechanical properties "hardness" and another "the basic one" to discuses improving its mechanical properties from view of microstructure transformations "type, amount, and properties" for each heat-treatment stage. This study was APPROVED as my BS graduate project from Metallurgy Engineering Collage, Cairo University 2001, and published after addition in experimental review at 2018.

Download or read book Processing Properties and Design of Advanced Ceramics and Composites II written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2018-02-05 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processing, Properties, and Design of Advanced Ceramics and Composites II, Ceramic Transactions Volume 261 Narottam P. Bansal, Ricardo H. R. Castro, Michael Jenkins, Amit Bandyopadhyay, Susmita Bose, Amar Bhalla, J.P. Singh, Morsi M. Mahmoud, Gary Pickrell, and Sylvia Johnson; Editors This proceedings volume contains a collection of 36 papers (~350 pages) from the following symposia held during the 2016 Materials Science and Technology (MS&T’16) meeting held in Salt Lake City, UT, October 24-27, 2016: Advanced Materials for Harsh Environments Advances in Dielectric Materials and Electronic Devices Advances in Ceramic Matrix Composites Ceramic Optical Materials Controlled Synthesis, Processing, and Applications of Structural and Functional Nanomaterials Innovative Processing and Synthesis of Ceramics, Glasses and Composites International Standards for Properties and Performance of Advanced Ceramics Multifunctional Oxides Rustum Roy Memorial Symposium on Processing and Performance of Materials Using Microwaves, Electric, and Magnetic Fields Sintering and Related Powder Processing Science and Technology Surface Properties of Biomaterials Thermal Protection Materials and Systems Zirconia Based Materials for Cutting Edge Technology

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book History Developments and Trends in the Heat Treatment of Steel written by Peter Jurči and published by MDPI. This book was released on 2021-03-01 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels and their heat treatment are still very important in modern industry because most industrial components are made from these materials. The proper choice of steel grades along with their suitable processing makes it possible to reduce the weight of the components, which is closely related to energy and fuel savings. This has decisive importance in branches such as the automotive, transport, consumer industries. A great number of novel heat- and surface-treatment techniques have been developed over the past three decades. These techniques involve, for example, vacuum treatment, sub-zero treatment, laser/electron beam surface hardening and alloying, low-pressure carburizing and nitriding, and physical vapour deposition. This Special Issue contains a collection of original research articles on not only advanced heat-treatment techniques—carburizing and sub-zero treatments—but also on the microstructure–property relationships in different ferrous alloys.

Download or read book Tool Steels 5th Edition written by George Adam Roberts and published by ASM International. This book was released on 1998 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2nd International Conference on Engineering Manufacture 2024 written by Lucas F. M. da Silva and published by Springer Nature. This book was released on with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1962 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Coatings Technology written by B. D. Sartwell and published by Elsevier. This book was released on 2016-06-03 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology, Volume 61 presents the proceeding of the 20th International Conference on Metallurgical Coatings and Thin Films, held in San Diego, California, on April 19–23, 1993. This book discusses a variety of topics related to surface and coatings technology, including coatings for use at high temperature, hard coatings, and vapor deposition technology. Organized into 141 chapters, this compilation of papers begins with an overview of the coating requirements for long-life bucket protection, how each of these coating systems has performed, and the advantages and disadvantages of each. This text then discusses the gradient-free transition step achieved in the element analysis of the depth profiles. Other chapters consider the metastable yttrium oxide films that are synthesized using reactive sputter deposition. This book discusses as well the use of appropriate copper-based alloy coatings on structural components. The final chapter deals with the particle mechanical and thermal behavior in the process of high velocity oxy-fuel spraying. This book is a valuable resource for chemical engineers and metallurgists.