Download or read book High Tc Superconductors written by J. Dumas and published by Elsevier. This book was released on 1993-05-05 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide range of progress in materials development [single crystals, ceramics, thin films, wire and tapes] is reported in the 169 papers in this volume. The main focus of the papers is in attaining a better understanding of the relationship between microstructure and electrical properties. Invited papers cover topics such as the effects of substitution and doping; multilayers; nanostructure characterisation; electric field effects in High Tc Superconductors [HTS]; surface stability; critical currents; flux pinning and magnetooptic imaging of flux patterns; effects of irradiation induced defects; properties and preparation of materials; microwave properties and electronic devices. A clearly broadened basis for understanding processes and mechanisms in [HTS] is portrayed. Appreciable progress has been achieved in the reproducible manufacturing of high quality materials supported by very efficient methods in microstructural analysis. This essential improvement is reflected in the increased number of practical devices encouraging the use of HTS in applications for electronics and power engineering, all of which are reviewed in depth in this work.
Download or read book Characterization of High Tc Materials and Devices by Electron Microscopy written by Nigel D. Browning and published by Cambridge University Press. This book was released on 2000-07-06 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a clear account of the application of electron-based microscopies to the study of high-Tc superconductors. Written by leading experts, this compilation provides a comprehensive review of scanning electron microscopy, transmission electron microscopy and scanning transmission electron microscopy, together with details of each technique and its applications. Introductory chapters cover the basics of high-resolution transmission electron microscopy, including a chapter devoted to specimen preparation techniques, and microanalysis by scanning transmission electron microscopy. Ensuing chapters examine identification of superconducting compounds, imaging of superconducting properties by low-temperature scanning electron microscopy, imaging of vortices by electron holography and electronic structure determination by electron energy loss spectroscopy. The use of scanning tunnelling microscopy for exploring surface morphology, growth processes and the mapping of superconducting carrier distributions is discussed. Final chapters consider applications of electron microscopy to the analysis of grain boundaries, thin films and device structures. Detailed references are included.
Download or read book Handbook of Superconductivity written by David A. Cardwell and published by CRC Press. This book was released on 2022-07-05 with total page 1292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second of three volumes of the extensively revised and updated second edition of the Handbook of Superconductivity. The past twenty years have seen rapid progress in superconducting materials, which exhibit one of the most remarkable physical states of matter ever to be discovered. Superconductivity brings quantum mechanics to the scale of the everyday world where a single, coherent quantum state may extend over a distance of metres, or even kilometres, depending on the size of a coil or length of superconducting wire. Viable applications of superconductors rely fundamentally on an understanding of this intriguing phenomena and the availability of a range of materials with bespoke properties to meet practical needs. While the first volume covers the fundamentals of superconductivity and the various classes of superconducting materials, Volume 2 covers processing of the desired superconducting materials into desired forms: bulks, films, wires and junction-based devices. The volume closes with articles on the refrigeration methods needed to put the materials into the superconducting state. Key Features: Covers the depth and breadth of the field Includes contributions from leading academics and industry professionals across the world Provides hands-on guidance to the manufacturing and processing technologies A comprehensive reference, the handbook is suitable for both graduate students and practitioners in experimental physics, materials science, and multiple engineering disciplines, including electronic and electrical, chemical, mechanical, metallurgy and others.
Download or read book High Tc Superconductor Thin Films written by L. Correra and published by Elsevier. This book was released on 2012-12-02 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interdisciplinary research on superconducting oxides is the main focus of the contributions in this volume. Several aspects of the thin film field from fundamental properties to applications are examined. Interesting results for the Bi system are also reviewed. The 132 papers, including 8 invited, report mainly on the 1-2-3 system, indicating that the Y-Ba-Cu-O and related compounds are still the most intensively studied materials in this field. The volume attests to the significant progress that has been made in this field, as well as reporting on the challenging problems that still remain to be solved.
Download or read book Science and Technology of Thin Film Superconductors 2 written by R.D. McConnell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference is the second on the Science and Technology of Thin Film Superconductors. It proved to be an excellent forum for these specialists in thin film superconductivity. The conference, held April 30-May 4, 1990, in Denver, Colorado, hosted 170 researchers from 17 countries. The response to the conference again emphasized the need for a meeting devoted to the science and technology of thin film superconductors. The breadth of artic1es and advances made in this technology since the first conference in November 1988, reflect on the maturity of the topic. These proceedings contain artic1es on deposition methods by sputtering, e1ectron beam evaporation, resistive evaporation, laser ablation, chemical vapor deposition and electrodeposition, and on other studies related to substrates, thermodynamics of formation, grain boundaries and weak links, characterization, and some practical applications. The program committee was pleased with the quality of the publications and contributed articles. This conference was highlighted by a fuU day dedicated to presentations from the federallaboratories, discussing a wide range of topics on the fabrication, characterization, and theory of high-temperature superconductor thin films. Other highlights at the conference dealt with (1) critical parameters or problems in measuring critical current density and other important parameters, and (2) problems of scale-up, reproducibility, and amenability to device fabrication. It became evident from the presentations that three issues were developing into critical issues for the ultimate practical application of high temperature superconductor thin films.
Download or read book High Tc Superconducting Thin Films Processing Characterization and Applications written by Roger L. Stockbauer and published by American Institute of Physics. This book was released on 1990 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial and national laboratory scientists, researchers and students of materials science.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1993-10 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Tc Superconductivity written by R. Bruce Van Dover and published by . This book was released on 1988 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliography written by Pierre Villars and published by Walter de Gruyter. This book was released on 2012-12-21 with total page 1827 pages. Available in PDF, EPUB and Kindle. Book excerpt: By browsing about 10 000 000 scientific articles of over 200 major journals mainly in a 'cover to cover approach' some 200 000 publications were selected. The extracted data is part of the following fundamental material research fields: crystal structures (S), phase diagrams (also called constitution) (C) and the comprehensive field of intrinsic physical properties (P). This work has been done systematically starting with the literature going back to 1900. The above mentioned research field codes (S, C, P) as well as the chemical systems investigated in each publication were included in the present work. The aim of the Inorganic Substances Bibliography is to provide researchers with a comprehensive compilation of all up to now published scientific publications on inorganic systems in only three handy volumes.
Download or read book Physics Briefs written by and published by . This book was released on 1993 with total page 1420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Superconductivity written by Paul Seidel and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 1334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This wide-ranging presentation of applied superconductivity, from fundamentals and materials right up to the details of many applications, is an essential reference for physicists and engineers in academic research as well as in industry. Readers looking for a comprehensive overview on basic effects related to superconductivity and superconducting materials will expand their knowledge and understanding of both low and high Tc superconductors with respect to their application. Technology, preparation and characterization are covered for bulk, single crystals, thins fi lms as well as electronic devices, wires and tapes. The main benefit of this work lies in its broad coverage of significant applications in magnets, power engineering, electronics, sensors and quantum metrology. The reader will find information on superconducting magnets for diverse applications like particle physics, fusion research, medicine, and biomagnetism as well as materials processing. SQUIDs and their usage in medicine or geophysics are thoroughly covered, as are superconducting radiation and particle detectors, aspects on superconductor digital electronics, leading readers to quantum computing and new devices.
Download or read book Second Generation HTS Conductors written by Amit Goyal and published by Springer Science & Business Media. This book was released on 2006-06-26 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third method invented is called the Rolling-assisted-biaxially-textured-substrates (RABiTS). The book is divided into four sections. The first section discusses the three methods to fabricate biaxially textured substrates, upon which, epitaxial YBCO or other HTS materials can be deposited to realize a single-crystal-like HTS wire. The second section includes chapters on various methods of HTS deposition such as pulsed laser ablation (PLD), thermal co-evaporation, sputtering, pulsed electron beam deposition, ex-situ BaF2 by co-evaporation flowed by annealing, chemical solution based ex-situ processes, jet vapor deposition, metal organic chemical vapor deposition (MOCVD), and liquid phase epitaxy (LPE). The third section includes detailed chapters on other HTS materials such as the various Tl-based and Hg-based conductors. These Second-Generation HTS conductors, also referred to as "Coated conductors" represent one of the most exciting developments in HTS technology.
Download or read book Recent Developments in Superconductivity Research written by Barry P. Martins and published by Nova Publishers. This book was released on 2007 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconductivity is the ability of certain materials to conduct electrical current with no resistance and extremely low losses. High temperature superconductors, such as La2-xSrxCuOx (Tc=40K) and YBa2Cu3O7-x (Tc=90K), were discovered in 1987 and have been actively studied since. In spite of an intense, world-wide, research effort during this time, a complete understanding of the copper oxide (cuprate) materials is still lacking. Many fundamental questions are unanswered, particularly the mechanism by which high-Tc superconductivity occurs. More broadly, the cuprates are in a class of solids with strong electron-electron interactions. An understanding of such "strongly correlated" solids is perhaps the major unsolved problem of condensed matter physics with over ten thousand researchers working on this topic. High-Tc superconductors also have significant potential for applications in technologies ranging from electric power generation and transmission to digital electronics. This ability to carry large amounts of current can be applied to electric power devices such as motors and generators, and to electricity transmission in power lines. For example, superconductors can carry as much as 100 times the amount of electricity of ordinary copper or aluminium wires of the same size. Many universities, research institutes and companies are working to develop high-Tc superconductivity applications and considerable progress has been made. This volume brings together new leading-edge research in the field.
Download or read book Engineering Superconductivity written by Peter J. Lee and published by John Wiley & Sons. This book was released on 2001-05-02 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of superconductivity from the Wiley Encyclopedia of Electrical and Electronics Engineering Engineering Superconductivity features fifty articles selected from the Wiley Encyclopedia of Electrical and Electronics Engineering, the one truly indispensable reference for electrical engineers. Superconductor technology has made highly advanced experiments possible in chemistry, biochemistry, particle physics, and health sciences, and introduced new applications currently in use in fields from medicine to cellular communications. Taken together, these articles-written by acknowledged experts in the field-provide the most complete and in-depth accounting of superconductivity in existence. The book brings together a wealth of information that would not be available to those who do not have access to the full 24-volume encyclopedia. This thorough survey looks at the application of superconductors from an engineer's practical perspective rather than a theoretical approach. Engineering Superconductivity provides full coverage of the fundamentals of superconducting behavior and explains the properties and fabrication methods of commercially produced superconductors. Up-to-date material on superconductor applications as well as competing technologies is included. The fifty articles presented here are divided into three sections: Superconductivity and magnetism Superconductors Applications and related technology Engineering Superconductivity is a complete and up-to-date reference for engineers, physicists, chemists, materials scientists, and anyone working with superconductors.
Download or read book Prospective Life Cycle Assessment of High Temperature Superconductors for Future Grid Applications written by Buchholz, Alexander and published by KIT Scientific Publishing. This book was released on 2022-07-27 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature superconductors have distinct advantages compared to conventional conductors. Below their critical temperature, superconductors have immeasurably low ohmic losses. To maintain the superconducting state, superconductors require constant cooling. This study aims at identifying the environmental impacts of the application of superconductors in future grid technologies such as superconducting power cables.
