Download or read book A Study of the Effects of Intake Fuel Temperature on the Performance of an Internal Combustion Spark Ignition Engine written by David C. Headley and published by . This book was released on 1964 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effects of Coolant Temperature on Spark Ignition Engine Performance written by Alaa M. Attar and published by . This book was released on 2009 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Previous studies have shown that increasing the coolant temperature in the internal combustion (IC) engine improved engine performance, especially in brake power and fuel consumption. To have more of an understanding about the reasons behind these improvements, a study of the cylinder from the inside was needed.
Download or read book Internal Combustion Engines written by Institution of Mechanical Engineers and published by Woodhead Publishing Limited. This book was released on 2009-11-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: This book contains the papers presented at the IMechE's Internal Combustion Engines: Performance, fuel economy and emissions conference, held at the IMechE, London, 8-9 December 2009. This conference, the latest in the successful biannual series on internal combustion engines, addresses drivers of change, technological developments and advances in the latest research. It examines developments for personal transport applications, though many of the drivers of change apply to light and heavy-duty, on and off-highway, transport and other sectors. The conference focuses on spark ignition engine technology for fuel economy, engine downsizing design and analysis, diesel engine design and analysis, and fuels. About the editors: The Institution of Mechanical Engineers (IMechE) is one of the leading professional engineering institutions in the world. Contents: SI ENGINES: TECHNOLOGY FOR FUEL ECONOMY A comparison of inlet valve operating strategies in a single cylinder spark ignition engine Future gasoline engine downsizing technologies - CO2 improvements and engine design considerations SI ENGINES: DOWNSIZING, DESIGN AND ANALYSIS Variable valve actuation enabled high efficiency gasoline engine A variable compression opposed-piston SI engine Application of high-precision absolute pressure sensors for gas exchange analysis DIESEL ENGINES: DESIGN AND ANALYSIS Effects of cooled and super-cooled low pressure EGR systems on the LD diesel engine performances Effect of compression ratio on combustion stability and performance of a DI diesel engine under cold conditions Effect of charge density on emissions in a HD-LTC diesel engine by retarding intake valve timing and rising boost pressure EMISSIONS CONTROL: NOx AND PARTICULATES Measures to improve the NOx-PM trade off for passenger car Diesel engines at elevated engine load Low particulate combustion development of the JCB Dieselmax mid-range off highway engine Exhaust inorganic nanoparticle emissions from internal combustion engines FUELS AND DIESEL ENGINES In-cylinder fuel injection and combustion analysis on 2nd generation bio-fuels in a single cylinder CR DI diesel optical engine Low NOx, low smoke operation of a diesel engine using a gasoline fuel Dual-fuel and low-carbon HGVs using bio methane Investigation of fuel properties and characterization of new generation alternative fuel for diesel engine LOW-TEMPERATURE COMBUSTION Hydrogen homogeneous charge compression ignition (HCCI) engine with DME as an ignition promoter HCCI simulation of a non reciprocating internal combustion engine The effects of exhaust back pressure on conventional and low temperature diesel combustion FUELS AND SI ENGINES Omnivore: an automotive flex-fuel 2-stroke engine with variable compression ratio, variable charge trapping and direct fuel injection A study of gasoline-alcohol blended fuels in a turbocharged DISI engine The nature of "superknock" and its origins in SI engines
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Internal Combustion Engines written by Institution of Mechanical Engineers and published by Woodhead Publishing. This book was released on 2014-10-10 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the Internal Combustion Engines: Performance, fuel economy and emissions held in London, UK. This popular international conference from the Institution of Mechanical Engineers provides a forum for IC engine experts looking closely at developments for personal transport applications, though many of the drivers of change apply to light and heavy duty, on and off highway, transport and other sectors. These are exciting times to be working in the IC engine field. With the move towards downsizing, advances in FIE and alternative fuels, new engine architectures and the introduction of Euro 6 in 2014, there are plenty of challenges. The aim remains to reduce both CO2 emissions and the dependence on oil-derivate fossil fuels whilst meeting the future, more stringent constraints on gaseous and particulate material emissions as set by EU, North American and Japanese regulations. How will technology developments enhance performance and shape the next generation of designs? The book introduces compression and internal combustion engines' applications, followed by chapters on the challenges faced by alternative fuels and fuel delivery. The remaining chapters explore current improvements in combustion, pollution prevention strategies and data comparisons. - Presents the latest requirements and challenges for personal transport applications - Gives an insight into the technical advances and research going on in the IC Engines field - Provides the latest developments in compression and spark ignition engines for light and heavy-duty applications, automotive and other markets
Download or read book Internal Combustion Engines written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2011-11-10 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers of the Internal Combustion Engines: Performance fuel economy and emissions conference, in the IMechE bi-annual series, held on the 29th and 30th November 2011. The internal combustion engine is produced in tens of millions per year for applications as the power unit of choice in transport and other sectors. It continues to meet both needs and challenges through improvements and innovations in technology and advances from the latest research. These papers set out to meet the challenges of internal combustion engines, which are greater than ever. How can engineers reduce both CO2 emissions and the dependence on oil-derivate fossil fuels? How will they meet the future, more stringent constraints on gaseous and particulate material emissions as set by EU, North American and Japanese regulations? How will technology developments enhance performance and shape the next generation of designs? This conference looks closely at developments for personal transport applications, though many of the drivers of change apply to light and heavy duty, on and off highway, transport and other sectors. - Aimed at anyone with interests in the internal combustion engine and its challenges - The papers consider key questions relating to the internal combustion engine
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Spark Ignition Combustion written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Internal Combustion Engine Research written by Dhananjay Kumar Srivastava and published by Springer. This book was released on 2017-11-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses all aspects of advanced engine technologies, and describes the role of alternative fuels and solution-based modeling studies in meeting the increasingly higher standards of the automotive industry. By promoting research into more efficient and environment-friendly combustion technologies, it helps enable researchers to develop higher-power engines with lower fuel consumption, emissions, and noise levels. Over the course of 12 chapters, it covers research in areas such as homogeneous charge compression ignition (HCCI) combustion and control strategies, the use of alternative fuels and additives in combination with new combustion technology and novel approaches to recover the pumping loss in the spark ignition engine. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.
Download or read book The Effect Of Compression Ratio On The Ability To Burn Lean Fuel Air Mixtures In A Spark Ignition Engine written by David H. Holkeboer and published by . This book was released on 1961 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2021-06-14 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph covers different aspects of internal combustion engines including engine performance and emissions and presents various solutions to resolve these issues. The contents provide examples of utilization of methanol as a fuel for CI engines in different modes of transportation, such as railroad, personal vehicles or heavy duty road transportation. The volume provides information about the current methanol utilization and its potential, its effect on the engine in terms of efficiency, combustion, performance, pollutants formation and prediction. The contents are also based on review of technologies present, the status of different combustion and emission control technologies and their suitability for different types of IC engines. Few novel technologies for spark ignition (SI) engines have been also included in this book, which makes this book a complete solution for both kind of engines. This book will be useful for engine researchers, energy experts and students involved in fuels, IC engines, engine instrumentation and environmental research.
Download or read book AN INVESTIGATION OF THE EFFECTS OF EXTREME LOW TEMPERATURES UPON COLD STARTING OF SPARK IGNITION ENGINES USING STANDARD GASOLINE written by REX HARRY WHITE (JR) and published by . This book was released on 1952 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Proceedings of the Fall Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 2007 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Internal Combustion Engine Fundamentals written by John B. Heywood and published by McGraw-Hill Education. This book was released on 1988 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, by a leading authority in the field, presents a fundamental and factual development of the science and engineering underlying the design of combustion engines and turbines. An extensive illustration program supports the concepts and theories discussed.
Download or read book The Effect of Inlet Air Temperature on the Efficiency of a Spark Ignition Engine written by John B. Toomey and published by . This book was released on 1951 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Internal Combustion Engines written by Constantine Arcoumanis and published by Elsevier. This book was released on 2012-12-02 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal Combustion Engines covers the trends in passenger car engine design and technology. This book is organized into seven chapters that focus on the importance of the in-cylinder fluid mechanics as the controlling parameter of combustion. After briefly dealing with a historical overview of the various phases of automotive industry, the book goes on discussing the underlying principles of operation of the gasoline, diesel, and turbocharged engines; the consequences in terms of performance, economy, and pollutant emission; and of the means available for further development and improvement. A chapter focuses on the automotive fuels of the various types of engines. Recent developments in both the experimental and computational fronts and the application of available research methods on engine design, as well as the trends in engine technology, are presented in the concluding chapters. This book is an ideal compact reference for automotive researchers and engineers and graduate engineering students.
