Download or read book Dust Explosion Dynamics written by Russell A. Ogle and published by Butterworth-Heinemann. This book was released on 2016-09-10 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dust Explosion Dynamics focuses on the combustion science that governs the behavior of the three primary hazards of combustible dust: dust explosions, flash fires, and smoldering. It explores the use of fundamental principles to evaluate the magnitude of combustible dust hazards in a variety of settings. Models are developed to describe dust combustion phenomena using the principles of thermodynamics, transport phenomena, and chemical kinetics. Simple, tractable models are described first and compared with experimental data, followed by more sophisticated models to help with future challenges. Dr. Ogle introduces the reader to just enough combustion science so that they may read, interpret, and use the scientific literature published on combustible dusts. This introductory text is intended to be a practical guide to the application of combustible dust models, suitable for both students and experienced engineers. It will help you to describe the dynamics of explosions and fires involving dust and evaluate their consequences which in turn will help you prevent damage to property, injury and loss of life from combustible dust accidents. - Demonstrates how the fundamental principles of combustion science can be applied to understand the ignition, propagation, and extinction of dust explosions - Explores fundamental concepts through model-building and comparisons with empirical data - Provides detailed examples to give a thorough insight into the hazards of combustible dust as well as an introduction to relevant scientific literature

Download or read book Combustion of Liquid Fuel Sprays written by Alan Williams and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion of Liquid Fuel Sprays outlines the fundamentals of the combustion of sprays in a unified way which may be applied to any technological application. The book begins with a discussion of the general nature of spray combustion, the sources of liquid fuels used in spray combustion, biomass sources of liquid fuels, and the nature and properties of fuel oils. Subsequent chapters focus on the properties of sprays, the atomization of liquid fuels, and the theoretical modeling of the behavior of a spray flame in a combustion chamber. The nature and control of pollutants from spray combustion, the formation of deposits in oil-fired systems, and the combustion of sprays in furnaces and engines are elucidated as well. The text is intended for students undertaking courses or research in fuel, combustion, and energy studies.

Download or read book The Vaporization and Self ignition of Liquid Fuel Drops written by Mohamed Ibrahim Abdou and published by . This book was released on 1962 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Study of the Self Ignition and Combustion of Residual Fuels with Temperature dependent Properties written by Richard Rong-Hu Shyu and published by . This book was released on 1969 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings written by and published by . This book was released on 1970 with total page 1532 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in High Performance Computing and Computational Sciences written by Yurii I. Shokin and published by Springer Science & Business Media. This book was released on 2006-09-25 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains contributions to the First Kazakh-German Advanced Research Workshop on Computational Science and High Performance Computing presented in September 2005 at Almaty, Kazakhstan. The workshop was organized by the High Performance Computing Center Stuttgart (Stuttgart, Germany), al-Farabi Kazakh National University (Almaty, Kazakhstan) and the Institute of Computational Technologies SB RAS (Novosibirsk, Russia) in the framework of activities of the German-Russian Center for Computational Technologies and High Performance

Download or read book The Canadian Journal of Chemical Engineering written by and published by . This book was released on 1989-02 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Material Science and Engineering written by Seyed Sattar Emamian and published by Springer Nature. This book was released on 2022-10-05 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the recent research works on mechanical, manufacturing and plant engineering presented during the 7th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2021) held on 29th November 2021. It highlights the latest advances in the emerging areas, brings together researchers and professionals in the field and provides a valuable platform for exchanging ideas and fostering collaboration. Addressing real-world problems concerning joining technologies that are at the heart of various manufacturing sectors, the respective papers present the outcomes of the latest experimental and numerical work on problems in soldering, arc welding and solid-state joining technologies.

Download or read book Fuel Property Estimation and Combustion Process Characterization written by Yen-Hsiung Kiang and published by Academic Press. This book was released on 2018-02-20 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Property Estimation and Combustion Process Characterization is a thorough tool book, which provides readers with the most up-to-date, valuable methodologies to efficiently and cost-effectively attain useful properties of all types of fuels and achieve combustion process characterizations for more efficient design and better operation. Through extensive experience in fuels and combustion, Kiang has developed equations and methodologies that can readily obtain reasonable properties for all types of fuels (including wastes and biomass), which enable him to provide guidance for designers and operators in the combustion field, in order to ensure the design, operation, and diagnostics of all types of combustion systems are of the highest quality and run at optimum efficiency. Written for professionals and researchers in the renewable energy, combustion, chemical, and mechanical engineering fields, the information in this book will equip readers with detailed guidance on how to reliably obtain properties of fuels quickly for the design, operation and diagnostics of combustion systems to achieve highly efficient combustion processes. - Presents models for quick estimation of fuel properties without going through elaborate, costly and time consuming sampling and laboratory testing - Offers methodologies to determine combustion process characteristics for designing and deploying combustion systems - Examines the fundamentals of combustion applied to energy systems, including thermodynamics of traditional and alternative fuels combustion - Presents a fuel property database for over 1400 fuels - Includes descriptive application of big data technology, using dual properties analysis as an example - Provides specific technical solutions for combustion, fuels and waste processing

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Vaporization and Ignition of Liquid Fuel Drops written by Mohamed Ibrahim Abdou and published by . This book was released on 1959 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ignition written by John Drury Clark and published by Rutgers University Press. This book was released on 2018-05-23 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly reissued debut book in the Rutgers University Press Classics Imprint is the story of the search for a rocket propellant which could be trusted to take man into space. This search was a hazardous enterprise carried out by rival labs who worked against the known laws of nature, with no guarantee of success or safety. Acclaimed scientist and sci-fi author John Drury Clark writes with irreverent and eyewitness immediacy about the development of the explosive fuels strong enough to negate the relentless restraints of gravity. The resulting volume is as much a memoir as a work of history, sharing a behind-the-scenes view of an enterprise which eventually took men to the moon, missiles to the planets, and satellites to outer space. A classic work in the history of science, and described as “a good book on rocket stuff…that’s a really fun one” by SpaceX founder Elon Musk, readers will want to get their hands on this influential classic, available for the first time in decades.

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Computational Techniques for Multiphase Flows written by Guan Heng Yeoh and published by Elsevier. This book was released on 2009-10-07 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed or multiphase flows of solid/liquid or solid/gas are commonly found in many industrial fields, and their behavior is complex and difficult to predict in many cases. The use of computational fluid dynamics (CFD) has emerged as a powerful tool for the understanding of fluid mechanics in multiphase reactors, which are widely used in the chemical, petroleum, mining, food, beverage and pharmaceutical industries. Computational Techniques for Multiphase Flows enables scientists and engineers to the undertand the basis and application of CFD in muliphase flow, explains how to use the technique, when to use it and how to interpret the results and apply them to improving aplications in process enginering and other multiphase application areas including the pumping, automotive and energy sectors. - Understandable guide to a complex subject - Important in many industries - Ideal for potential users of CFD

Download or read book Index of NACA Technical Publications written by United States. National Advisory Committee for Aeronautics and published by . This book was released on 1959 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: