Download or read book A Study of Negative Ion Sources for a Charge exchange Accelerator written by Toivo Henry Koski and published by . This book was released on 1956 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Ion Sources written by Bernhard Wolf and published by CRC Press. This book was released on 1995-08-31 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Ion Sources delivers the data needed for daily work with ion sources. It also gives information for the selection of a suitable ion source and ion production method for a specific application. The Handbook concentrates on practical aspects and introduces the principle function of ion sources. The basic plasma parameters are defined and discussed. The working principles of various ion sources are explained, and examples of each type of ion source are presented with their operational data. Tables of ion current for various elements and charge states summarize the performance of different ion sources. The problems related to the production of ions of non-gaseous elements are detailed, and data on useful materials for evaporation and ion source construction are summarized. Additional chapters are dedicated to extraction and beam formation, ion beam diagnosis, ion source electronics, and computer codes for extraction, acceleration, and beam transport. Emittance and brilliance are described and space charge effects and neutralization discussed. Various methods for the measurement of current, profile, emittance, and time structure are presented and compared. Intensity limits for these methods are provided for different ion energies. Typical problems related to the operation of ion source plasmas are discussed and practical examples of circuits are given. The influence of high voltage on ion source electronics and possibilities for circuit protection are covered. The generation of microwaves and various microwave equipment are described and special problems related to microwave operation are summarized. The Handbook of Ion Sources is a valuable reference on the subject, of benefit to practitioners and graduate students interested in accelerators, ion implantation, and ion beam techniques.
Download or read book Fusion written by Garry McCracken and published by Academic Press. This book was released on 2013 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Offers scientists and researchers the scientific basics, up-to-date current research, technical developments, and practical applications needed in fusion energy research/"--pub. desc.
Download or read book The Physics and Technology of Ion Sources written by Ian G. Brown and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this title has become a well-known reference book on ion sources. The field is evolving constantly and rapidly, calling for a new, up-to-date version of the book. In the second edition of this significant title, editor Ian Brown, himself an authority in the field, compiles yet again articles written by renowned experts covering various aspects of ion source physics and technology. The book contains full chapters on the plasma physics of ion sources, ion beam formation, beam transport, computer modeling, and treats many different specific kinds of ion sources in sufficient detail to serve as a valuable reference text.
Download or read book Theory and Design of Charged Particle Beams written by Martin Reiser and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although particle accelerators are the book's main thrust, it offers a broad synoptic description of beams which applies to a wide range of other devices such as low-energy focusing and transport systems and high-power microwave sources. Develops material from first principles, basic equations and theorems in a systematic way. Assumptions and approximations are clearly indicated. Discusses underlying physics and validity of theoretical relationships, design formulas and scaling laws. Features a significant amount of recent work including image effects and the Boltzmann line charge density profiles in bunched beams.
Download or read book Plasma Technology written by M. Capitelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book contains the proceedings of the workshop "Plasma Technology and Applications" which was held at 11 Ciocco (Lucca-Italy) during 5-6 July 1991. The workshop was organized just before ICPIG XX to emphasize the role of plasma physics and plasma chemistry in different fields of technology. Topics cover different applications such as lamps, plasma treatment of materials (etching, deposition, nitriding), plasma sources (microwave excitation, negative ion sources) and plasma destruction of pollutants. Several chapters deal with basic concepts in plasma physics, non equilibrium plasma modeling and plasma diagnostics as well as with laser interaction with solid targets. The authors gratefully acknowledge the financial support provided by university of Bari (Italy) and by CNR (Centro di Studio per la Chimica dei Plasmi, Istituto di Fisica Atomica e Molecolare (IFAM) and Progetto Finalizzato Materiali Speciali per Tecnologie Avanzate) as well as the sponsorship of ENEA. M. Capitelli C. Gorse v CONTENTS Plasmas in nature, laboratory and technology 1 A.M. Ignatov and A.A. Rukhadze Laser diagnostics of plasmas 11 L. Pyatnitsky Probe diagnostics of plasmas 27 G. Dilecce Theory, properties and applications of non equilibrium plasmas created by external energy sources 45 E. Son Non-Equilibrium plasma modeling 59 M. Capitel1i, R. Celiberto, G. Capriati, C. Gorse and S. Longo Gas discharge lamps 81 M. Koedam Plasma etching processes and diagnostics 93 R. d'Agostino and F. Fracassi Plasma deposition: processes and diagnostics 109 A
Download or read book Fun in Fusion Research written by John Sheffield and published by Newnes. This book was released on 2013-02-20 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the fun side of the quest to develop fusion energy—a modern equivalent of the hunt for the Holy Grail. After more than 70 years of research, despite great progress, the goal has not been realized. Do you have to be crazy to love quests like this? Not really, but you do have to have an unshakeable optimism. Through humorous anecdotes, and accessible yet detailed scientific discussion, this book illuminates the enjoyment of scientific research through an account of fifty years working on fusion energy development. The anecdotes bring out the human side of research, in which innovative and sometimes egocentric scientists create both clever and nutty experiments. Among the many stories within are witchcraft at Harwell, shocking experiences, entertaining talks, and the wit of top scientists such as Marshall Rosenbluth. Above all the book highlights the significant advances made in developing practical fusion energy and the promise for an exciting future with the National Ignition Facility and International Thermonuclear Experimental Reactor. This book will be of interest to physicists as well as other students and researchers in the scientific and wider communities. - Shows the exciting and fun aspects of science research - Author has spent 54 years working in the area, offering key insights on the history of fusion - Clear, detailed explanations of fusion energy are supplied, helping non-science readers understand the area
Download or read book Fundamentals of Electric Propulsion written by Dan M. Goebel and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout most of the twentieth century, electric propulsion was considered the technology of the future. Now, the future has arrived. This important new book explains the fundamentals of electric propulsion for spacecraft and describes in detail the physics and characteristics of the two major electric thrusters in use today, ion and Hall thrusters. The authors provide an introduction to plasma physics in order to allow readers to understand the models and derivations used in determining electric thruster performance. They then go on to present detailed explanations of: Thruster principles Ion thruster plasma generators and accelerator grids Hollow cathodes Hall thrusters Ion and Hall thruster plumes Flight ion and Hall thrusters Based largely on research and development performed at the Jet Propulsion Laboratory (JPL) and complemented with scores of tables, figures, homework problems, and references, Fundamentals of Electric Propulsion: Ion and Hall Thrusters is an indispensable textbook for advanced undergraduate and graduate students who are preparing to enter the aerospace industry. It also serves as an equally valuable resource for professional engineers already at work in the field.
Download or read book Development and Applications of Negative Ion Sources written by Vadim Dudnikov and published by Springer Nature. This book was released on 2023-06-22 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of sources of negative ions and their application in science and industry. It describes the physical foundations and implementation of the key methods of negative ion production and control, such as charge exchange, thermionic emission, plasma volume, secondary emission (sputtering) and surface-plasma sources, as well as the history of their development. Following on from this essential foundational material, the book goes on to explore transport of negative ion beams, and beam-plasma instabilities. Now in its second edition, the book has been substantially expanded and updated to address the many developments since it was first published, most importantly the development and investigation of cesiated surfaces with work function ~1.2-1.3 eV in conditions close to discharges in surface plasma sources. The book also includes a new chapter on development of conversion targets for high-energy neutral beam injectors, covering gas targets, plasma targets and photon targets for efficient conversion of high energy negative ion beams to neutral beams. With exposition accessible at the graduate level, and a comprehensive bibliography, this book will appeal to all students and researchers whose work concerns ion sources and their applications to accelerators, beam physics, storage rings, cyclotrons, and plasma traps.
Download or read book Fusion Technology 1996 written by C. Varandas and published by Elsevier. This book was released on 2012-12-02 with total page 1057 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of these proceedings was to provide a platform for the exchange of information on the design, construction and operation of fusion experiments. The technology which is being developed for the next step devices and fusion reactors was also covered.
Download or read book Large Ion Beams written by A. Theodore Forrester and published by Wiley-VCH. This book was released on 1988-05-02 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magneto-Solid Mechanics Francis C. Moon Comprehensively treats, in monograph form, problems directly related to magneto-solid mechanics. Provides a thoroughly modern examination of the stresses, dynamics, and stability of magneto-mechanical devices such as superconducting magnets, levitated vehicles, magnetic mass drivers, electromagnets, and actuators. Over 60 specific coupled-magneto-mechanical problems are discussed and analyzed, and well over 200 illustrations are included. Physical concepts are introduced early, along with summaries of the basic equations of magneto-solid mechanics, magnetic forces, and energy. 1984 (0 471-88536-3) 436 pp. Chaotic Vibrations An Introduction for Applied Scientists and Engineers Francis C. Moon A valuable work which helps to translate new mathematical ideas in non-linear dynamics and chaos into a language that engineers and scientists can understand. As such it provides specific examples and applications of chaotic dynamics in the physical world and describes how to perform both computer and physical experiments in chaotic dynamics. New ideas in dynamics are explained such as Poincare maps, fractal dimensions and Lyapunov exponents. Includes a glossary of chaotic dynamics terms, a list of computer experiments, and an appendix of details for a demonstration experiment. 1987 (0 471-85685-1) 300 pp.
Download or read book Physics and Applications of Hydrogen Negative Ion Sources written by Marthe Bacal and published by Springer Nature. This book was released on 2023-05-10 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of hydrogen negative ion sources and their applications to particle acceleration and nuclear fusion. The book begins with fundamental aspects of negative ion production by volume and surface processes in hydrogen and its isotopes. It covers key topics, such as the need for separation of negative ion production and extraction regions, the need for lowering the work function of the plasma electrode by using caesium vapor or special materials for caesium-free sources, and the ion extractor structure required for hydrogen negative ion sources. Chapters covering various specific ion sources and applications are written by scientists who participated in their development and include sources for accelerators and for neutral beam injection into controlled nuclear fusion reactors.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1983 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1976-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-05 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration. Technical Information Center and published by . This book was released on 1976 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
