Download or read book Annals of Scientific Society for Assembly Handling and Industrial Robotics 2021 written by Thorsten Schüppstuhl and published by Springer Nature. This book was released on 2021 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI). The Editors Prof. Dr.-Ing. Thorsten Schüppstuhl is head of the Institute of Aircraft Production Technology (IFPT) at the Hamburg University of Technology. Prof. Dr.-Ing. Kirsten Tracht is head of the Bremen Institute for Mechanical Engineering (bime) at the University of Bremen. Prof. Dr.-Ing. Annika Raatz is head of the Institute of Assembly Technology (match) at the Leibniz University Hannover.

Download or read book Manufacturing Process Selection Handbook written by K. G. Swift and published by Butterworth-Heinemann. This book was released on 2013-02-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Process Selection Handbook provides engineers and designers with process knowledge and the essential technological and cost data to guide the selection of manufacturing processes early in the product development cycle. Building on content from the authors' earlier introductory Process Selection guide, this expanded handbook begins with the challenges and benefits of identifying manufacturing processes in the design phase and appropriate strategies for process selection. The bulk of the book is then dedicated to concise coverage of different manufacturing processes, providing a quick reference guide for easy comparison and informed decision making. For each process examined, the book considers key factors driving selection decisions, including: - Basic process descriptions with simple diagrams to illustrate - Notes on material suitability - Notes on available process variations - Economic considerations such as costs and production rates - Typical applications and product examples - Notes on design aspects and quality issues Providing a quick and effective reference for the informed selection of manufacturing processes with suitable characteristics and capabilities, Manufacturing Process Selection Handbook is intended to quickly develop or refresh your experience of selecting optimal processes and costing design alternatives in the context of concurrent engineering. It is an ideal reference for those working in mechanical design across a variety of industries and a valuable learning resource for advanced students undertaking design modules and projects as part of broader engineering programs. - Provides manufacturing process information maps (PRIMAs) provide detailed information on the characteristics and capabilities of 65 processes in a standard format - Includes process capability charts detailing the processing tolerance ranges for key material types - Offers detailed methods for estimating costs, both at the component and assembly level

Download or read book Rapid Manufacturing written by Duc Pham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid prototyping is an exciting new technology used to create physical models and functional prototypes directly from CAD models. Rapid tooling concerns the production of tooling using parts manufactured by rapid prototyping. The book describes the characteristics and capabilities of the main known rapid prototyping processes. It covers in detail various commercially available processes such as: Stereolithography (SLA), Selective Laser Sintering (SLS), and others. The text places a strong emphasis on practical applications and contains an abundance of photographs and diagrams to illustrate clearly the principles of the machines and processes involved.

Download or read book Ceramic Nanocomposites written by Rajat Banerjee and published by Elsevier. This book was released on 2013-07-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic nanocomposites have been found to have improved hardness, strength, toughness and creep resistance compared to conventional ceramic matrix composites. Ceramic nanocomposites reviews the structure and properties of these nanocomposites as well as manufacturing and applications.Part one looks at the properties of different ceramic nanocomposites, including thermal shock resistance, flame retardancy, magnetic and optical properties as well as failure mechanisms. Part two deals with the different types of ceramic nanocomposites, including the use of ceramic particles in metal matrix composites, carbon nanotube-reinforced glass-ceramic matrix composites, high temperature superconducting ceramic nanocomposites and ceramic particle nanofluids. Part three details the processing of nanocomposites, including the mechanochemical synthesis of metallic–ceramic composite powders, sintering of ultrafine and nanosized ceramic and metallic particles and the surface treatment of carbon nanotubes using plasma technology. Part four explores the applications of ceramic nanocomposites in such areas as energy production and the biomedical field.With its distinguished editors and international team of expert contributors, Ceramic nanocomposites is a technical guide for professionals requiring knowledge of ceramic nanocomposites, and will also offer a deeper understanding of the subject for researchers and engineers within any field dealing with these materials. - Reviews the structure and properties of ceramic nanocomposites as well as their manufacturing and applications - Examines properties of different ceramic nanocomposites, as well as failure mechanisms - Details the processing of nanocomposites and explores the applications of ceramic nanocomposites in areas such as energy production and the biomedical field

Download or read book Smart Polymers and Composites written by Abu Nasar and published by Materials Research Forum LLC. This book was released on 2018-01-02 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric compounds are generally blended with inorganic/organic materials to prepare composites to tailor the desired properties for specific requirements. The present book reviews new research in the fields of composite green polymers for environmental applications, polyaniline based composites for wastewater treatment, smart polymeric coating materials, polymer decorated bimetallic nanosorbents for dye removal, fuel cell materials, polymeric membranes, green bio-nanocomposites and polymer based catalysts. Composite Green Polymers, Polyaniline Based Composites, Smart Polymeric Materials, Nanosorbents, Polymeric Membranes, Bio-Nanocomposites, Polymer Based Catalyst, Wastewater Treatment, Dye Removal, Fuel Cell Materials, Dehydrogenation

Download or read book 3D Printing in Biomedical Engineering written by Sunpreet Singh and published by Springer Nature. This book was released on 2020-07-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of the rapidly evolving field of three-dimensional (3D) printing, and its increasing applications in the biomedical domain. 3D printing has distinct advantages like improved quality, cost-effectiveness, and higher efficiency compared to traditional manufacturing processes. Besides these advantages, current challenges and opportunities regarding choice of material, design, and efficiency are addressed in the book. Individual chapters also focus on select areas of applications such as surgical guides, tissue regeneration, artificial scaffolds and implants, and drug delivery and release. This book will be a valuable source of information for researchers and professionals interested in the expanding biomedical applications of 3D printing.

Download or read book Casting Processes and Modelling of Metallic Materials written by Zak Abdallah and published by BoD – Books on Demand. This book was released on 2021-02-24 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Casting Processes and Modelling of Metallic Materials, explores the various casting and modelling activities related to metallic alloy systems. The book provides results of research work conducted by experts from all over the globe to add to the research community in the era of the casting process and modelling. The book was edited by two experts in the field of materials science and modelling, Dr. Abdallah and Dr. Aldoumani, whom both have several publications in peer-reviewed journals, worldwide conferences, and scientific books. The book introduces the casting processes and then discusses the various issues and possible solutions. Over the past years, various models have been proposed and utilized to predict the performance of castings. Some of these models proved to be accurate whereas others failed to predict the casting performance. The strength of any predictive tool depends on the employment of physically meaningful parameters that replicate the real-life conditions. This has been illustrated in the current book with such predictive models and finite element (FE) modelling to illustrate the behaviour of castings in real-life conditions.

Download or read book 3D Printing and Additive Manufacturing Technologies written by L. Jyothish Kumar and published by Springer. This book was released on 2018-06-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of papers on advanced technologies for 3D printing and additive manufacturing, and demonstrates how these technologies have changed the face of direct, digital technologies for the rapid production of models, prototypes and patterns. Because of their wide range of applications, 3D printing and additive manufacturing technologies have sparked a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across such diverse industries as consumer products, aerospace, medical devices and automotive engineering. This book will help designers, R&D personnel, and practicing engineers grasp the latest developments in the field of 3D Printing and Additive Manufacturing.

Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners

Download or read book Rapid Prototyping Principles And Applications 2nd Edition With Companion Cd rom written by Chee Kai Chua and published by World Scientific Publishing Company. This book was released on 2003-03-03 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Prototyping (RP) has revolutionized the landscape of how prototypes and products are made and small batch manufacturing carried out. This book gives a comprehensive coverage of RP and rapid tooling processes, data formats and applications. A CD-ROM, included in the book, presents RP and its principles in an interactive way to augment the learning experience.Special features:

Download or read book METAL CASTING written by B. RAVI and published by PHI Learning Pvt. Ltd.. This book was released on 2005-01-01 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a scientific approach to metal casting design and analysis supported by software tools. Unlike other books in metal casting focused only on the process know-how, this book uncovers the know-why as well. Besides serving the needs of students of mechanical, production and metallurgical engineering, this book is equally meant to benefit practicing engineers involved or interested in casting development, including product designers, toolmakers, foundry engineers, supply chain managers, engineering consultants, researchers, and software developers. The theory discussed in the book is applicable to all types of castings: ferrous and non-ferrous, produced in sand and metal moulds. By gaining a better understanding of the theory and logic involved through creating, analysing and optimizing virtual castings, the readers will learn how to: Design process-friendly cast products, leading to shorter development time Manufacture assured quality castings, leading to fewer rejections and 'surprises' Manage material and energy utilization, leading to higher yield and lower costs.

Download or read book Rapid Prototyping and Engineering Applications written by Frank W. Liou and published by CRC Press. This book was released on 2007-09-26 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: More quality, more flexibility, and less costs seem to be the key to meeting the demands of the global marketplace. The secret to success in this arena lies in the expert execution of the critical tasks in the product definition stage. Prototyping is an essential part of this stage, yet can be very expensive. It must be planned well and use state-o

Download or read book 3D Printed Microfluidic Devices written by Savas Tasoglu and published by MDPI. This book was released on 2019-01-10 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "3D Printed Microfluidic Devices" that was published in Micromachines

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.

Download or read book Advances in Additive Manufacturing Modeling Systems and 3D Prototyping written by Massimo Di Nicolantonio and published by Springer. This book was released on 2019-06-04 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus highlighting future trends and promising scenarios for further developing those technologies. Based on the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, held on July 24-28, 2019, in Washington D.C., USA, the book is intended as source of inspiration for researchers, engineers and stakeholders, and to foster interdisciplinary and international collaborations between them.

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.