Download or read book All Digital Frequency Synthesizer in Deep Submicron CMOS written by Robert Bogdan Staszewski and published by John Wiley & Sons. This book was released on 2006-09-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new and innovative paradigm for RF frequency synthesis and wireless transmitter design Learn the techniques for designing and implementing an all-digital RF frequency synthesizer. In contrast to traditional RF techniques, this innovative book sets forth digitally intensive design techniques that lead the way to the development of low-cost, low-power, and highly integrated circuits for RF functions in deep submicron CMOS processes. Furthermore, the authors demonstrate how the architecture enables readers to integrate an RF front-end with the digital back-end onto a single silicon die using standard ASIC design flow. Taking a bottom-up approach that progressively builds skills and knowledge, the book begins with an introduction to basic concepts of frequency synthesis and then guides the reader through an all-digital RF frequency synthesizer design: Chapter 2 presents a digitally controlled oscillator (DCO), which is the foundation of a novel architecture, and introduces a time-domain model used for analysis and VHDL simulation Chapter 3 adds a hierarchical layer of arithmetic abstraction to the DCO that makes it easier to operate algorithmically Chapter 4 builds a phase correction mechanism around the DCO such that the system's frequency drift or wander performance matches that of the stable external frequency reference Chapter 5 presents an application of the all-digital RF synthesizer Chapter 6 describes the behavioral modeling and simulation methodology used in design The final chapter presents the implementation of a full transmitter and experimental results. The novel ideas presented here have been implemented and proven in two high-volume, commercial single-chip radios developed at Texas Instruments: Bluetooth and GSM. While the focus of the book is on RF frequency synthesizer design, the techniques can be applied to the design of other digitally assisted analog circuits as well. This book is a must-read for students and engineers who want to learn a new paradigm for RF frequency synthesis and wireless transmitter design using digitally intensive design techniques.

Download or read book Pll Performance Simulation and Design written by Dean Banerjee and published by Dog Ear Publishing. This book was released on 2006-08 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for the reader who wishes to gain a solid understanding of Phase Locked Loop architectures and their applications. It provides a unique balance between both theoretical perspectives and practical design trade-offs. Engineers faced with real world design problems will find this book to be a valuable reference providing example implementations, the underlying equations that describe synthesizer behavior, and measured results that will improve confidence that the equations are a reliable predictor of system behavior. New material in the Fourth Edition includes partially integrated loop filter implementations, voltage controlled oscillators, and modulation using the PLL.

Download or read book Monolithic Phase Locked Loops and Clock Recovery Circuits written by Behzad Razavi and published by John Wiley & Sons. This book was released on 1996-04-18 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring an extensive 40 page tutorial introduction, this carefully compiled anthology of 65 of the most important papers on phase-locked loops and clock recovery circuits brings you comprehensive coverage of the field-all in one self-contained volume. You'll gain an understanding of the analysis, design, simulation, and implementation of phase-locked loops and clock recovery circuits in CMOS and bipolar technologies along with valuable insights into the issues and trade-offs associated with phase locked systems for high speed, low power, and low noise.

Download or read book Radiation Tolerant Electronics written by Paul Leroux and published by MDPI. This book was released on 2019-08-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on radiation-tolerant electronics has increased rapidly over the past few years, resulting in many interesting approaches to modeling radiation effects and designing radiation-hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation-hardened electronics for space applications, high-energy physics experiments such as those on the Large Hadron Collider at CERN, and many terrestrial nuclear applications including nuclear energy and nuclear safety. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their susceptibility to ionizing radiation has raised many exciting challenges, which are expected to drive research in the coming decade. In this book we highlight recent breakthroughs in the study of radiation effects in advanced semiconductor devices, as well as in high-performance analog, mixed signal, RF, and digital integrated circuits. We also focus on advances in embedded radiation hardening in both FPGA and microcontroller systems and apply radiation-hardened embedded systems for cryptography and image processing, targeting space applications.

Download or read book Principles of Data Conversion System Design written by Behzad Razavi and published by Wiley-IEEE Press. This book was released on 1995 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This advanced text and reference covers the design and implementation of integrated circuits for analog-to-digital and digital-to-analog conversion. It begins with basic concepts and systematically leads the reader to advanced topics, describing design issues and techniques at both circuit and system level. Gain a system-level perspective of data conversion units and their trade-offs with this state-of-the art book. Topics covered include: sampling circuits and architectures, D/A and A/D architectures; comparator and op amp design; calibration techniques; testing and characterization; and more!

Download or read book Analog Circuit Design written by Johan Huijsing and published by Springer Science & Business Media. This book was released on 1992-12-31 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Analog Circuit Design concentrates on three topics: Operational Amplifiers. A-to-D converters and Analog CAD. The book comprises six papers on each topic written by internationally recognised experts. These papers have a tutorial nature aimed at improving the design of analog circuits. The book is divided into three parts. Part I, Operational Amplifiers, presents new technologies for the design of Op-Amps in both bipolar and CMOS technologies. Two papers demonstrate techniques for improving frequency and gain behavior at high voltage. Low voltage bipolar Op-Amp design is treated in another paper. The realization high-speed and high gain VLSI building blocks in CMOS is demonstrated in two papers. The final paper shows how to provide output power with CMOS buffer amplifiers. Part II, Analog-to-Digital Conversion, presents papers which address very high conversion speeds and very high resolution implementations using sigma-delta modulation architectures. Analog to Digital converters provide the link between the analog world of transducers and the digital world of signal processing and computing. High-performance bipolar and MOS technologies result in high-resolution or high-speed convertors which can be applied in digital audio or video systems. Furthermore, the advanced high-speed bipolar technologies show an increase in conversion speed into the gigahertz range. Part III, Analog Computer Aided Design, presents the latest research towards providing analog circuit designers with the tools needed to automate much of the design process. The techniques and methodologies described demonstrate the advances being made in developing analog design tools comparable with those already available for digital design. The papers in this volume are based on those presented at the Workshop on Advances in Analog Circuit Design held in Delft, The Netherlands in 1992. The main intention of the workshop was to brainstorm with a group of about 100 analog design experts on the new possibilities and future developments on the above topics. The result of this brainstorming is contained in Analog Circuit Design, which is thus an important reference for researchers and design engineers working in the forefront of analog circuit design and research.

Download or read book Data Converters written by Franco Maloberti and published by Springer Science & Business Media. This book was released on 2007-02-22 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first graduate-level textbook presenting a comprehensive treatment of Data Converters. The advancement of digital electronics urged the availability of a still missing support for teaching and self-learning analog-digital interfaces at many levels: the specification, the conversion methods and architectures, the circuit design and the testing. This book, after the necessary study of the background theoretical elements, covers aspects and provide elements for a deep and comprehensive knowledge. The breath and the level of details of topics is enhanced by introductory material in each chapter and the use of many examples, most of them in the form of computer behavioral simulations. The examples and the end-of-chapter problems help in understanding and favor self-practice using tools that are effective for training and for design activity. Data Converters is a textbook that is also essential for engineering professionals as it was written for responding to a shortage of organically organized material on the topic. The book assumes a solid background in analog and digital circuits as well as a working knowledge of simulation tools for circuit and behavioral analysis. A background on statistical analysis is also helpful, though not strictly necessary. Coverage of all the basic elements essential for a clear understanding of sampling, quantization, noise in sampled-data systems and mathematical tools for sampled-data linear systems Comprehensive definition of the parameters used to specify data converters and necessary for understanding product data sheets Coverage of all the architectures used in Nyquist-rate data converters and detailed study of features, limits and design techniques Detailed study of oversampled and Sigma-Delta converters with simulation examples and use of spectra and histograms for a clear understanding of features and limit if the noise shaping Coverage of digital correction and calibration techniques for enhancing performances Use of theory and intuitive views to explain circuits and systems operation and limits Coverage of testing methods and description of the data processing used for testing and characterization Extensive use of Simulink and Matlab in examples and problem sets to assist reader comprehension and favor deeper study

Download or read book Nyquist AD Converters Sensor Interfaces and Robustness written by Arthur van Roermund and published by Springer. This book was released on 2014-12-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 presentations during the 21st workshop on Advances in Analog Circuit Design. Expert designers provide readers with information about a variety of topics at the frontier of analog circuit design, including Nyquist analog-to-digital converters, capacitive sensor interfaces, reliability, variability, and connectivity. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book Analog Circuit Design written by Arthur H.M. van Roermund and published by Springer Science & Business Media. This book was released on 2005-12-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Number 12 in the successful series of Analog Circuit Design provides valuable information and excellent overviews of analogue circuit design, CAD and RF systems. The series is an ideal reference for those involved in analogue and mixed-signal design.

Download or read book Design Modeling and Testing of Data Converters written by Paolo Carbone and published by Springer Science & Business Media. This book was released on 2013-10-05 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the a scientific discussion of the state-of-the-art techniques and designs for modeling, testing and for the performance analysis of data converters. The focus is put on sustainable data conversion. Sustainability has become a public issue that industries and users can not ignore. Devising environmentally friendly solutions for data conversion designing, modeling and testing is nowadays a requirement that researchers and practitioners must consider in their activities. This book presents the outcome of the IWADC workshop 2011, held in Orvieto, Italy.

Download or read book Demystifying Switched Capacitor Circuits written by Mingliang (Michael) Liu and published by Elsevier. This book was released on 2006-06-12 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps engineers to grasp fundamental theories and design principles by presenting physical and intuitive explanations of switched-capacitor circuits. Numerous circuit examples are discussed and the author emphasizes the most important and fundamental principles involved in implementing state-of-the-art switched-capacitor circuits for analog signal processing and power management applications. Throughout the book, the author presents numerous step-by-step tutorials and gives practical design examples.While some quantitative analysis is necessary to understand underlying concepts, tedious mathematical equations and formal proofs are avoided. An intuitive appreciation for switched-capacitor circuits is achieved.Much of the existing information on contemporary switched-capacitor circuit applications is in the form of applications notes and data sheets for various switched-capacitor ICs. This book compiles such information in a single volume and coherently organizes and structures it.The author has his own website at www.mingliangliu.com * Step-by-step tutorials which emphasize the most fundamental principals of switched-capacitor circuits * Few tedious mathematical equations * The first easy-to-understand compilation on this subject--most information available is not very cohesive

Download or read book Dictionary of Acronyms and Technical Abbreviations written by Jakob Vlietstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Dictionary covers information and communication technology (ICT), including hardware and software; information networks, including the Internet and the World Wide Web; automatic control; and ICT-related computer-aided fields. The Dictionary also lists abbreviated names of relevant organizations, conferences, symposia and workshops. This reference is important for all practitioners and users in the areas mentioned above, and those who consult or write technical material. This Second Edition contains 10,000 new entries, for a total of 33,000.

Download or read book Analog Circuit Design written by Willy M.C. Sansen and published by Springer Science & Business Media. This book was released on 1999-10-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Analog Circuit Design concentrates on three topics: (X)DSL and other communication systems; RF MOST models; and integrated filters and oscillators. The book comprises five chapters on the first topic with six each on the other two, all written by internationally recognized experts. They are tutorial in nature and together make a substantial contribution to improving the design of analog circuits. The book is divided into three parts: Part I: (X)DSL and other Communication Systems presents some examples of recent improved modem techniques which have resulted in much higher transmission speeds over the local telephone network. It also presents components for the implementation of different standards. Part II: RF MOST Models investigates the state of the art in RF MOST models. It compares the existing BSIM3v3, Philips' Model 9 and the EKV model with respect to their capability to accurately predict GHz performance with submicron CMOST technologies. It shows how it has now become quite feasible to model a MOST at very high frequencies, giving rise to an increased use of MOST technologies in RF applications. Part III: Integrated Filters and Oscillators illustrates how the increasing use of communication tools goes hand-in-hand with the design of analog filters and oscillators with greater flexibility and higher bandwidth.

Download or read book Audio and Hi Fi Handbook written by Ian Sinclair and published by Newnes. This book was released on 2000-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of experts and specialist contributors, this comprehensive guide has proved to be an invaluable resource for professional designers and service engineers. Each chapter is written by a leading author, including Don Aldous, Nick Beer, John Borwick, Dave Berriman, John Linsley Hood, Geoff Lewis and John Watkinson, which provides as wide a perspective as possible on high-quality sound reproduction as well as a wealth of expertise. The third edition includes new chapters on servicing, Nicam stereo and digital satellite radio. For the first time in paperback, this revised edition features a completely new chapter on the most recent digital developments, CD-R/RW, HDCD, Internet audio, MP3 players and DAM-CD. Ian Sinclair has written over 140 books on aspects of electronics and computing and has been a regular contributor to the electronics and computing press.

Download or read book Integrated Frequency Synthesizers for Wireless Systems written by Andrea Leonardo Lacaita and published by Cambridge University Press. This book was released on 2007-06-28 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasingly demanding performance requirements of communications systems, as well as problems posed by the continued scaling of silicon technology, present numerous challenges for the design of frequency synthesizers in modern transceivers. This book contains everything you need to know for the efficient design of frequency synthesizers for today's communications applications. If you need to optimize performance and minimize design time, you will find this book invaluable. Using an intuitive yet rigorous approach, the authors describe simple analytical methods for the design of phase locked loop (PLL) frequency synthesizers using scaled silicon CMOS and bipolar technologies. The entire design process, from system-level specification to layout, is covered comprehensively. Practical design examples are included, and implementation issues are addressed. A key problem-solving resource for practitioners in IC design, the book will also be of interest to researchers and graduate students in electrical engineering.

Download or read book Digital Signal Processing for Communication Systems written by Tadeusz Wysocki and published by Springer. This book was released on 2012-11-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing for Communication Systems examines the plans for the future and the progress that has already been made, in the field of DSP and its applications to communication systems. The book pursues the progression from communication and information theory through to the implementation, evaluation and performance enhancing of practical communication systems using DSP technology. Digital Signal Processing for Communication Systems looks at various types of coding and modulation techniques, describing different applications of Turbo-Codes, BCH codes and general block codes, pulse modulations, and combined modulation and coding in order to improve the overall system performance. The book examines DSP applications in measurements performed for channel characterisation, pursues the use of DSP for design of effective channel simulators, and discusses equalization and detection of various signal formats for different channels. A number of system design issues are presented where digital signal processing is involved, reporting on the successful implementation of the system components using DSP technology, and including the problems involved with implementation of some DSP algorithms. Digital Signal Processing for Communication Systems serves as an excellent resource for professionals and researchers who deal with digital signal processing for communication systems, and may serve as a text for advanced courses on the subject.

Download or read book Plant Flow Measurement and Control Handbook written by Swapan Basu and published by Academic Press. This book was released on 2018-08-22 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Flow Measurement and Control Handbook is a comprehensive reference source for practicing engineers in the field of instrumentation and controls. It covers many practical topics, such as installation, maintenance and potential issues, giving an overview of available techniques, along with recommendations for application. In addition, it covers available flow sensors, such as automation and control. The author brings his 35 years of experience in working in instrumentation and control within the industry to this title with a focus on fluid flow measurement, its importance in plant design and the appropriate control of processes. The book provides a good balance between practical issues and theory and is fully supported with industry case studies and a high level of illustrations to assist learning. It is unique in its coverage of multiphase flow, solid flow, process connection to the plant, flow computation and control. Readers will not only further understand design, but they will also further comprehend integration tactics that can be applied to the plant through a step-by-step design process that goes from installation to operation. - Provides specification sheets, engineering drawings, calibration procedures and installation practices for each type of measurement - Presents the correct flow meter that is suitable for a particular application - Includes a selection table and step-by-step guide to help users make the best decision - Cover examples and applications from engineering practice that will aid in understanding and application