Download or read book A Structural and Kinetic Study of CoMo gamma A10 Hydrodesulfurization Catalyst Using EXAFS and XANES written by Thomas Gene Parham and published by . This book was released on 1983 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology in Oil and Gas Industries written by Tawfik Abdo Saleh and published by Springer. This book was released on 2017-10-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a powerful source to develop new, rapid and highly efficient materials for the application in various fields of oil and gas. It focuses on the synthesis, characterization and applications of various Nanomaterials, presenting the state-of-the-art in developments and innovations in nanocomposites. This book provides the complete practical and theoretical information about the synthesis of nanoparticles with potential use in the field of oil and gas.

Download or read book Supported Catalysts and Their Applications written by David C Sherrington and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to improve both the efficiency and environmental acceptability of industrial processes is driving the development of heterogeneous catalysts across the chemical industry, including commodity, specialty and fine chemicals and in pharmaceuticals and agrochemicals. Drawing on international research, Supported Catalysts and their Applications discusses aspects of the design, synthesis and application of solid supported reagents and catalysts, including supported reagents for multi-step organic synthesis; selectivity in oxidation catalysis; mesoporous molecular sieve catalysts; and the use of Zeolite Beta in organic reactions. In addition, the two discrete areas of heterogeneous catalysis (inorganic oxide materials and polymer-based catalysts) that were developing in parallel are now shown to be converging, which will be of great benefit to the whole field. Providing a snapshot of the state-of-the-art in this fast-moving field, this book will be welcomed by industrialists and researchers, particularly in the agrochemicals and pharmaceuticals industries.

Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.

Download or read book Catalytic Hydrogenation for Biomass Valorization written by Roberto Rinaldi and published by Royal Society of Chemistry. This book was released on 2015 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the biorefinery industry expands to meet the latest discoveries in biomass conversion, this book provides a thorough grounding in the subject.

Download or read book Catalytic Naphtha Reforming written by George J. Antos and published by CRC Press. This book was released on 1995 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique, single-source reference offers complete coverage of the process and catalyst chemistry involved in naphtha reforming - from the preparation, characterization, and performance evaluation of catalysts to the operation of the catalyst itself - and evaluates the most recent research into unknown aspects of catalyst reactions, shedding light on the future of catalyst technology. Discussing the complexities of the reforming process, Catalytic Naphtha Reforming delineates commercially available processes and catalysts . . . explores the chemistry of the catalytic sites employed for reactions . . . examines catalyst deactivation, pretreating processes to prevent it, and regeneration processes . . . describes metals recovery as well as significant improvements in platinum reforming catalysts . . . explains process development and modeling . . . presents new commercial technologies . . . and much more.

Download or read book Kinetics of Heterogeneous Catalytic Reactions written by Michel Boudart and published by Princeton University Press. This book was released on 2014-07-14 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a critical account of the principles of the kinetics of heterogeneous catalytic reactions in the light of recent developments in surface science and catalysis science. Originally published in 1984. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.

Download or read book Chemical Reaction and Reactor Engineering written by James John Carberry and published by CRC Press. This book was released on 2020-08-27 with total page 1086 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an authoritative progress report that will remain germane to the topic and prove to be a substantial inspiration to further progress. It is valuable to academic and industrial practitioners of the art and science of chemical reaction and reactor engineering.

Download or read book Catalyst Preparation written by John Regalbuto and published by CRC Press. This book was released on 2016-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.

Download or read book Hydrodesulfurization and Hydrodenitrogenation written by Toshiaki Kabe and published by Wiley-VCH. This book was released on 2000-04-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of efficient catalysts for hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) processes is an essential and urgent research field. During oil refinement the removal of sulfur and nitrogen compounds from petroleum feedstock is crucial, as the emission of sulfur and nitrogen oxides into the atmosphere causes severe environmental problems. In light of the industrial process for hydrocarbons, HDS is indispensable as it eliminates the poisoning of catalysts during hydrotreatment and hydrocracking. In order to develop new catalysts, the mechanism of these reactions as well as the structures and functions of the catalysts need to be elucidated. This book provides an up-to-date and deep insight, which spans kinetic studies, catalytic cycles, structures and properties of catalysts to process engineering. Therefore every chemist and engineer working in this important research field will welcome this valuable source of information.

Download or read book The Science and Technology of Coal and Coal Utilization written by Bernard Cooper and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the need for new and improved energy sources is an area where societal effects of science and technology will surely increase. The editors and authors have attempted in this volume to present the most current work on the science and technology of coal and coal utilization. Serious disagreement exists on several key issues such as carbon dioxide release and acid rain. At the same time, however, coal is the world's most abundant fossil fuel and will have to be used to supply the world's energy needs for the next several decades. The 1979 National Research Council Report, "En ergy in Transition: 1985-2010," has estimated that the United States alone may go from a 1979 coal consumption of 14 QUADS per annum (approximately 750 million tons per year) to approximately 40-50 QUADS per annum (approximately 2 billion tons per year) by the year 2010. If this scale of coal utilization is to become a reality, a significant level of research and development will be necessary to establish advanced process technologies and to improve related areas such as materials and instrumentation. The editors hope that this volume will allow a technically educated person to become aware of the several aspects of coal utilization, from characterization of coal itself to the processes of coal utilization. B. R. Cooper and W. A. Ellingson March, 1983 vii Contents 1. THE SCIENCE AND TECHNOLOGY OF COAL AND COAL UTILIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Bernard R. Cooper and William A. Ellingson 2. COAL CHARACTERIZATION. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Download or read book Single Walled Carbon Nanotubes written by Yan Li and published by Springer. This book was released on 2019-05-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry Collections presents critical reviews from the journal Topics in Current Chemistry organized in topical volumes. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field.

Download or read book Coal Science written by Martin L. Gorbaty and published by Academic Press. This book was released on 2013-10-22 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal Science, Volume 3 presents and evaluates selected fundamental scientific areas on coal structure, reactivity, and utilization. This book describes the organic geochemistry of coal, role of oxygen functionality in coal and coal liquids reactivity, chemistry of hydrocarbon syntheses from carbon monoxide and hydrogen, and chemistry of coal in carbon monoxide/water systems. Other topics discussed include intermediates and mechanisms of the FTS of hydrocarbons; synthesis of oxygenates; and structural features of vitrinite macerals. The molecular weight determination for coal derivatives; thermal reactions of oxygen compounds; and alternative methods for removing oxygen compounds from coal-derived liquids are also elaborated. This publication likewise covers the aqueous coal conversions and conversion mechanism. This volume serves as a valuable source of information and guide to scientists and researchers interested in the coal literature.

Download or read book Hydrocarbon Phase Behavior written by Tarek H. Ahmed and published by Butterworth-Heinemann. This book was released on 1989 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quantitative X Ray Spectrometry Second Edition written by Ron Jenkins and published by CRC Press. This book was released on 1995-04-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work covers important aspects of X-ray spectrometry, from basic principles to the selection of instrument parameters and sample preparation. This edition explicates the use of combined X-ray fluorescence and X-ray diffraction data, and features new applications in environmental studies, forensic science, archeometry and the analysis of metals and alloys, minerals and ore, ceramic materials, catalysts and trace metals.;This work is intended for spectroscopists, analytical chemists, materials scientists, experimental physicists, mineralogists, biologists, geologists and graduate-level students in these disciplines.

Download or read book Transition Metal Sulphides written by Th. Weber and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrotreating catalysis with transition metal sulphides is one of the most important areas of industrial heterogeneous catalysis. The present book deals with the chemical and catalytic aspects of transition metal sulphides, focusing on their use in hydrotreating catalysis. The book¿s 12 chapters present reviews of solid-state, coordination and organometallic chemistry, surface science and spectroscopic studies, quantum chemical calculations, catalytic studies with model and real catalysts, as well as refinery processes. A presentation of state-of-the-art background to pertinent work in the field. Can be used as an introduction to the chemical and catalytic properties of transition metal sulphides as well as an advanced level reference.

Download or read book Advanced Catalysts and Nanostructured Materials written by William R. Moser and published by Academic Press. This book was released on 1996-11-19 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: The time has come for an assessment of the most important techniques for the fabrication of advanced catalysts. Catalyst production alone is more than a billion dollar business each year, and the product value of chemical processes using advanced catalysts is a few trillion dollars annually. This book seeks to provide a modern, materials science account of the best and most current techniques for the synthesis of advanced catalytic materials. Until now, there has been no single book which contains a definitive and comprehensive description of the important technologies for catalyst synthesis within the context of modern materials science. Academic researchers both in the catalytic sciences and materials sciences must have the best synthesis technologies available to accomplish the preparation of solid-state materials of specific structure and morphology. Althugh the emphasis is on new synthetic techniques for catalytic applications, the bookpresents all of the important technologies for the fabrication of electronic and structural ceramics, and superconductors. - Novel Techniques for Advanced Materials - Nanostructured Materials Synthesis - Mesoporous Molecular Sieves - Pillared Clays - Heteropoly Acids - Nanostructured Supported Metal Catalysts - Nanostructured Metal Oxide Catalysts and Materials - Nanostructured Zeolite Materials - Vapor Phase Materials Synthesis - Sonochemical Materials Synthesis - Aerosol Methods of Catalyst Synthesis - Hydrodynamic Cavitational Techniques for Catalyst and Materials Synthesis - Novel Sol-Gel Methods for Catalyst Synthesis - Supercritical Methods for Materials Synthesis - Liquid Crystal Techniques for Mesoporous Materials - Micelle Techniques for Nanostructured Catalyst Preparation - Fluidized Bed Techniques in Chemical Vapor Deposition - Flame Methods of Advanced Catalyst Synthesis