Download or read book A Simulation Evaluation of Alternative Responses to Time cost Variances in Stochastic Project Networks written by Nathan Golergante Slochowski and published by . This book was released on 1978 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stochastic Project Networks written by Klaus Neumann and published by Springer Science & Business Media. This book was released on 1990-07-10 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project planning, scheduling, and control are regularly used in business and the service sector of an economy to accomplish outcomes with limited resources under critical time constraints. To aid in solving these problems, network-based planning methods have been developed that now exist in a wide variety of forms, cf. Elmaghraby (1977) and Moder et al. (1983). The so-called "classical" project networks, which are used in the network techniques CPM and PERT and which represent acyclic weighted directed graphs, are able to describe only projects whose evolution in time is uniquely specified in advance. Here every event of the project is realized exactly once during a single project execution and it is not possible to return to activities previously carried out (that is, no feedback is permitted). Many practical projects, however, do not meet those conditions. Consider, for example, a production process where some parts produced by a machine may be poorly manufactured. If an inspection shows that a part does not conform to certain specifications, it must be repaired or replaced by a new item. This means that we have to return to a preceding stage of the production process. In other words, there is feedback. Note that the result of the inspection is that a certain percentage of the parts tested do not conform. That is, there is a positive probability (strictly less than 1) that any part is defective.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measuring Time written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2009-10-09 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meant to complement rather than compete with the existing books on the subject, this book deals with the project performance and control phases of the project life cycle to present a detailed investigation of the project’s time performance measurement methods and risk analysis techniques in order to evaluate existing and newly developed methods in terms of their abilities to improve the corrective actions decision-making process during project tracking. As readers apply what is learned from the book, EVM practices will become even more effective in project management and cost engineering. Individual chapters look at simulation studies in forecast accuracy; schedule adherence; time sensitivity; activity sensitivity; and using top-down or bottom-up project tracking. Vanhoucke also offers an actual real-life case study, a tutorial on the use of ProTrack software (newly developed based on his research) in EVM, and conclusions on the relative effectiveness for each technique presented.
Download or read book Project Management written by T. Klastorin and published by Pearson Learning Solutions. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1972 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Stochastic Differential Equations written by Simo Särkkä and published by Cambridge University Press. This book was released on 2019-05-02 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: With this hands-on introduction readers will learn what SDEs are all about and how they should use them in practice.
Download or read book The University of Virginia Record written by University of Virginia and published by . This book was released on 2006 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Stochastic Modeling written by Howard M. Taylor and published by Academic Press. This book was released on 2014-05-10 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Stochastic Modeling provides information pertinent to the standard concepts and methods of stochastic modeling. This book presents the rich diversity of applications of stochastic processes in the sciences. Organized into nine chapters, this book begins with an overview of diverse types of stochastic models, which predicts a set of possible outcomes weighed by their likelihoods or probabilities. This text then provides exercises in the applications of simple stochastic analysis to appropriate problems. Other chapters consider the study of general functions of independent, identically distributed, nonnegative random variables representing the successive intervals between renewals. This book discusses as well the numerous examples of Markov branching processes that arise naturally in various scientific disciplines. The final chapter deals with queueing models, which aid the design process by predicting system performance. This book is a valuable resource for students of engineering and management science. Engineers will also find this book useful.
Download or read book Simulation Modeling and Analysis with ARENA written by Tayfur Altiok and published by Elsevier. This book was released on 2010-07-26 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation Modeling and Analysis with Arena is a highly readable textbook which treats the essentials of the Monte Carlo discrete-event simulation methodology, and does so in the context of a popular Arena simulation environment. It treats simulation modeling as an in-vitro laboratory that facilitates the understanding of complex systems and experimentation with what-if scenarios in order to estimate their performance metrics. The book contains chapters on the simulation modeling methodology and the underpinnings of discrete-event systems, as well as the relevant underlying probability, statistics, stochastic processes, input analysis, model validation and output analysis. All simulation-related concepts are illustrated in numerous Arena examples, encompassing production lines, manufacturing and inventory systems, transportation systems, and computer information systems in networked settings. Introduces the concept of discrete event Monte Carlo simulation, the most commonly used methodology for modeling and analysis of complex systems Covers essential workings of the popular animated simulation language, ARENA, including set-up, design parameters, input data, and output analysis, along with a wide variety of sample model applications from production lines to transportation systems Reviews elements of statistics, probability, and stochastic processes relevant to simulation modeling
Download or read book The Multi Agent Transport Simulation MATSim written by Andreas Horni and published by Ubiquity Press. This book was released on 2016-08-10 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MATSim (Multi-Agent Transport Simulation) software project was started around 2006 with the goal of generating traffic and congestion patterns by following individual synthetic travelers through their daily or weekly activity programme. It has since then evolved from a collection of stand-alone C++ programs to an integrated Java-based framework which is publicly hosted, open-source available, automatically regression tested. It is currently used by about 40 groups throughout the world. This book takes stock of the current status. The first part of the book gives an introduction to the most important concepts, with the intention of enabling a potential user to set up and run basic simulations. The second part of the book describes how the basic functionality can be extended, for example by adding schedule-based public transit, electric or autonomous cars, paratransit, or within-day replanning. For each extension, the text provides pointers to the additional documentation and to the code base. It is also discussed how people with appropriate Java programming skills can write their own extensions, and plug them into the MATSim core. The project has started from the basic idea that traffic is a consequence of human behavior, and thus humans and their behavior should be the starting point of all modelling, and with the intuition that when simulations with 100 million particles are possible in computational physics, then behavior-oriented simulations with 10 million travelers should be possible in travel behavior research. The initial implementations thus combined concepts from computational physics and complex adaptive systems with concepts from travel behavior research. The third part of the book looks at theoretical concepts that are able to describe important aspects of the simulation system; for example, under certain conditions the code becomes a Monte Carlo engine sampling from a discrete choice model. Another important aspect is the interpretation of the MATSim score as utility in the microeconomic sense, opening up a connection to benefit cost analysis. Finally, the book collects use cases as they have been undertaken with MATSim. All current users of MATSim were invited to submit their work, and many followed with sometimes crisp and short and sometimes longer contributions, always with pointers to additional references. We hope that the book will become an invitation to explore, to build and to extend agent-based modeling of travel behavior from the stable and well tested core of MATSim documented here.
Download or read book Index Medicus written by and published by . This book was released on 2003 with total page 2214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1963- include as pt. 2 of the Jan. issue: Medical subject headings.
Download or read book Transportation Decision Making written by Kumares C. Sinha and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pioneering text provides a holistic approach to decisionmaking in transportation project development and programming, whichcan help transportation professionals to optimize their investmentchoices. The authors present a proven set of methodologies forevaluating transportation projects that ensures that all costs andimpacts are taken into consideration. The text's logical organization gets readers started with asolid foundation in basic principles and then progressively buildson that foundation. Topics covered include: Developing performance measures for evaluation, estimatingtravel demand, and costing transportation projects Performing an economic efficiency evaluation that accounts forsuch factors as travel time, safety, and vehicle operatingcosts Evaluating a project's impact on economic development and landuse as well as its impact on society and culture Assessing a project's environmental impact, including airquality, noise, ecology, water resources, and aesthetics Evaluating alternative projects on the basis of multipleperformance criteria Programming transportation investments so that resources can beoptimally allocated to meet facility-specific and system-widegoals Each chapter begins with basic definitions and concepts followedby a methodology for impact assessment. Relevant legislation isdiscussed and available software for performing evaluations ispresented. At the end of each chapter, readers are providedresources for detailed investigation of particular topics. Theseinclude Internet sites and publications of international anddomestic agencies and research institutions. The authors alsoprovide a companion Web site that offers updates, data foranalysis, and case histories of project evaluation and decisionmaking. Given that billions of dollars are spent each year ontransportation systems in the United States alone, and that thereis a need for thorough and rational evaluation and decision makingfor cost-effective system preservation and improvement, this textshould be on the desks of all transportation planners, engineers,and educators. With exercises in every chapter, this text is anideal coursebook for the subject of transportation systems analysisand evaluation.
Download or read book Simulation Modeling and Analysis with Expertfit Software written by Averill Law and published by McGraw-Hill Science/Engineering/Math. This book was released on 2006-07-21 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition in 1982, the goal of Simulation Modeling and Analysis has always been to provide a comprehensive, state-of-the-art, and technically correct treatment of all important aspects of a simulation study. The book strives to make this material understandable by the use of intuition and numerous figures, examples, and problems. It is equally well suited for use in university courses, simulation practice, and self study. The book is widely regarded as the “bible” of simulation and now has more than 100,000 copies in print. The book can serve as the primary text for a variety of courses; for example: • A first course in simulation at the junior, senior, or beginning-graduate-student level in engineering, manufacturing, business, or computer science (Chaps. 1 through 4, and parts of Chaps. 5 through 9). At the end of such a course, the students will be prepared to carry out complete and effective simulation studies, and to take advanced simulation courses. • A second course in simulation for graduate students in any of the above disciplines (most of Chaps. 5 through 12). After completing this course, the student should be familiar with the more advanced methodological issues involved in a simulation study, and should be prepared to understand and conduct simulation research. • An introduction to simulation as part of a general course in operations research or management science (part of Chaps. 1, 3, 5, 6, and 9).
Download or read book The Design and Analysis of Computer Experiments written by Thomas J. Santner and published by Springer. This book was released on 2019-01-08 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes methods for designing and analyzing experiments that are conducted using a computer code, a computer experiment, and, when possible, a physical experiment. Computer experiments continue to increase in popularity as surrogates for and adjuncts to physical experiments. Since the publication of the first edition, there have been many methodological advances and software developments to implement these new methodologies. The computer experiments literature has emphasized the construction of algorithms for various data analysis tasks (design construction, prediction, sensitivity analysis, calibration among others), and the development of web-based repositories of designs for immediate application. While it is written at a level that is accessible to readers with Masters-level training in Statistics, the book is written in sufficient detail to be useful for practitioners and researchers. New to this revised and expanded edition: • An expanded presentation of basic material on computer experiments and Gaussian processes with additional simulations and examples • A new comparison of plug-in prediction methodologies for real-valued simulator output • An enlarged discussion of space-filling designs including Latin Hypercube designs (LHDs), near-orthogonal designs, and nonrectangular regions • A chapter length description of process-based designs for optimization, to improve good overall fit, quantile estimation, and Pareto optimization • A new chapter describing graphical and numerical sensitivity analysis tools • Substantial new material on calibration-based prediction and inference for calibration parameters • Lists of software that can be used to fit models discussed in the book to aid practitioners
Download or read book Teletraffic Issues in an Advanced Information Society written by Minoru Akiyama and published by North Holland. This book was released on 1985 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Beyond Beta written by Samuel Kotz and published by World Scientific. This book was released on 2004 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical distributions are fundamental to Statistical Science and are a prime indispensable tool for its applications. This monograph is the first to examine an important but somewhat neglected field — univariate continuous distribution on a bounded domain, excluding the beta distribution. It provides an elementary but thorough discussion of “novel” contributions developed in recent years, such as the two-sided power, generalized trapezoidal and generalized Topp and Leone distributions, among others. It discusses a general framework for constructing two-sided distributions and some of its properties. It contains a comprehensive chapter on the triangular distribution as well as a chapter on earlier extensions not emphasized in existing literature. Special attention is given to estimation, in particular, non-standard maximum likelihood procedures. The applications are drawn mainly from the econometric and engineering domains.
