Download or read book A Review Ultrahigh Vacuum Technology for Electron Microscopes written by Nagamitsu Yoshimura and published by Academic Press. This book was released on 2020-02-15 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Review: Ultrahigh-Vacuum Technology for Electron Microscopes provides information on the fundamentals of ultra-high vacuum systems. It covers the very subtle process that can help increase pressure inside the microscope (or inside any other ultra-high vacuum system) and the different behavior of the molecules contributing to this kind of process. Prof Yoshimura’s book offers detailed information on electron microscope components, as well as UHV technology. This book is an ideal resource for industrial microscopists, engineers and scientists responsible for the design, operation and maintenance of electron microscopes. In addition, engineering students or engineers working with electron microscopes will find it useful. Teaches how to incorporate diffusion pumps for UHV electron microscopy Presents the work of an author who brings a lifetime of experience working on vacuum technology and electron microscopes
Download or read book Historical Evolution Toward Achieving Ultrahigh Vacuum in JEOL Electron Microscopes written by Nagamitsu Yoshimura and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the developmental history of the vacuum system of the transmission electron microscope (TEM) at the Japan Electron Optics Laboratory (JEOL) from its inception to its use in today’s high-technology microscopes. The author and his colleagues were engaged in developing vacuum technology for electron microscopes (JEM series) at JEOL for many years. This volume presents a summary and explanation of their work and the technology that makes possible a clean ultrahigh vacuum. The typical users of the TEM are top-level researchers working at the frontiers of new materials or with new biological specimens. They often use the TEM under extremely severe conditions, with problems sometimes occurring in the vacuum system of the microscopes. JEOL engineers then must work as quickly as possible to improve the vacuum evacuation system so as to prevent the recurrence of such problems. Among the wealth of explanatory material in this book are examples of users’ reports of problems in the vacuum system of the JEM, such as the occurrence of a micro-discharge and the back-streaming of the diffusion pump (DP) oil vapor. This work is a valuable resource for researchers who use the transmission electron microscope and for engineers and scientists interested in its technology.
Download or read book Ultrahigh Vacuum Scanning Electron Microscopy and Special Effects in Secondary Emission Electron Spectroscopy written by Dale Everett Miller and published by . This book was released on 1981 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundations of Molecular Flow Networks for Vacuum System Analysis written by Nagamitsu Yoshimura and published by Academic Press. This book was released on 2019-11-13 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foundations of Molecular-Flow Networks for Vacuum System Analysis is the only book that covers desorption, adsorption and outgassing in relation to molecular-flow networks. It will be beneficial for academics, students and industry personnel working in the field of ultra-high vacuums for designing the equipment/set-up and as a guide to understand the processes relating to vacuums. The book is fully supported with equations and case studies from industry. Vacuum technology is extensively used in large synchrotrons and other large accelerators, as well as in many other smaller industrial and scientific facilities. Hence, this book is a welcome addition to the literature. - Explains how to design, model and simulate vacuum systems to obtain satisfactory pressure distributions - Offers a practical description of molecular flow, providing techniques to design molecular flow networks of vacuum systems and processes - Explores equivalence with electrical components to help readers with simulation using free software such as LTSPICE
Download or read book Ultrahigh Vacuum Transmission Electron Microscopy Studies of Semiconductor Surfaces written by Ganesh Jayaram and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliographies of Interest to the Atomic Energy Program 1962 Through 1966 written by U.S. Atomic Energy Commission and published by . This book was released on 1968 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vacuum Methods in Electron Microscopy written by Wilbur C. Bigelow and published by Ashgate Publishing. This book was released on 1994 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study provides full details and advice on the understanding and practical operation of the vacuum systems found in electron microscope laboratories. The importance of the correct functioning of these systems is too frequently underestimated, with the result that electron microscopes and other vacuum equipment, such as freeze-etching units and sputter coaters, give less than their optimum performance.
Download or read book Vacuum Technology written by Nagamitsu Yoshimura and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, Yoshimura provides a review of the UHV related development during the last decades. His very broad experience in the design enables him to present us this detailed reference. After a general description how to design UHV systems, he covers all important issue in detail, like pumps, outgasing, Gauges, and Electrodes for high voltages. Thus, this book serves as reference for everybody using UVH in scientific equipment.
Download or read book An Ultrahigh Vacuum Scanning Electron Microscope written by Brian N. Halawith and published by . This book was released on 1986 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Auger Electron Spectroscopy written by Donald T. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auger electron spectroscopy is rapidly developing into the single most powerful analytical technique in basic and applied science.for investigating the chemical and structural properties of solids. Its ex plosive growth beginning in 1967 was triggered by the development of Auger analyzers capable of de tecting one atom layer of material in a fraction of a second. Continued growth was guaranteed firstly by the commercial availability of apparatus which combined the capabilities of scanning electron mi croscopy and ion-mill depth profiling with Auger analysis, and secondly by the increasing need to know the atomistics of many processes in fundamental research and engineering applications. The expanding use of Auger analysis was accompanied by an increase in the number of publications dealing with it. Because of the developing nature of Auger spectroscopy, the articles have appeared in many different sources covering diverse disciplines, so that it is extremely difficult to discover just what has or has not been subjected to Auger analysis. In this situation, a comprehensive bibliography is obviou-sly useful to those both inside and outside the field. For those in the field, this bibliography should be a wonderful time saver for locating certain references, in researching a particular topic, or when considering various aspects of instrumentation or data analysis. This bibliography not only provides the most complete listing of references pertinent to surface Auger analysis available today, but it is also a basis for extrapolating from past trends to future expectations.
Download or read book Treatise on Materials Science and Technology written by Herbert Herman and published by Elsevier. This book was released on 2013-10-22 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 4 covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book covers articles on advanced techniques by which thin films may be characterized; on diffusion in substitutional alloys; and on solid solution strengthening in face-centered cubic alloys. The text also includes articles on the thermodynamics of binary ordered intermetallic phases; and the major aspects of metal powder processing. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.
Download or read book Nanofabrication Handbook written by Stefano Cabrini and published by CRC Press. This book was released on 2012-02-24 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many books are dedicated to individual aspects of nanofabrication, there is no single source that defines and explains the total vision of the field. Filling this gap, Nanofabrication Handbook presents a unique collection of new and the most important established approaches to nanofabrication. Contributors from leading research facilities and
Download or read book Bibliography of Mass Spectroscopy Literature for 1970 written by and published by . This book was released on 1972 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofabrication Using Focused Ion and Electron Beams written by Ivo Utke and published by Oxford University Press. This book was released on 2012-03-05 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication Using Focused Ion and Electron Beams presents fundamentals of the interaction of focused ion and electron beams (FIB/FEB) with surfaces, as well as numerous applications of these techniques for nanofabrication involving different materials and devices. The book begins by describing the historical evolution of FIB and FEB systems, applied first for micro- and more recently for nanofabrication and prototyping, practical solutions available in the market for different applications, and current trends in development of tools and their integration in a fast growing field of nanofabrication and nanocharacterization. Limitations of the FIB/FEB techniques, especially important when nanoscale resolution is considered, as well as possible ways to overcome the experimental difficulties in creating new nanodevices and improving resolution of processing, are outlined. Chapters include tutorials describing fundamental aspects of the interaction of beams (FIB/FEB) with surfaces, nanostructures and adsorbed molecules; electron and ion beam chemistries; basic theory, design and configuration of equipment; simulations of processes; basic solutions for nanoprototyping. Emerging technologies as processing by cluster beams are also discussed. In addition, the book considers numerous applications of these techniques (milling, etching, deposition) for nanolithography, nanofabrication and characterization, involving different nanostructured materials and devices. Its main focus is on practical details of using focused ion and electron beams with gas assistance (deposition and etching) and without gas assistance (milling/cutting) for fabrication of devices from the fields of nanoelectronics, nanophotonics, nanomagnetics, functionalized scanning probe tips, nanosensors and other types of NEMS (nanoelectromechanical systems). Special attention is given to strategies designed to overcome limitations of the techniques (e.g., due to damaging produced by energetic ions interacting with matter), particularly those involving multi-step processes and multi-layer materials. Through its thorough demonstration of fundamental concepts and its presentation of a wide range of technologies developed for specific applications, this volume is ideal for researches from many different disciplines, as well as engineers and professors in nanotechnology and nanoscience.
Download or read book The Physical Basis of Ultrahigh Vacuum written by P. A. Redhead and published by London : Chapman and Hall. This book was released on 1968 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to NIST National Institute of Standards and Technology written by DIANE Publishing Company and published by DIANE Publishing. This book was released on 1997-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathers in one place descriptions of NIST's many programs, products, services, and research projects, along with contact names, phone numbers, and e-mail and World Wide Web addresses for further information. It is divided into chapters covering each of NIST's major operating units. In addition, each chapter on laboratory programs includes subheadings for NIST organizational division or subject areas. Covers: electronics and electrical engineering; manufacturing engineering; chemical science and technology; physics; materials science and engineering; building and fire research and information technology.
Download or read book Handbook of Materials Characterization written by Surender Kumar Sharma and published by Springer. This book was released on 2018-09-18 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the widely used experimental techniques available for the structural, morphological, and spectroscopic characterization of materials. Recent developments in a wide range of experimental techniques and their application to the quantification of materials properties are an essential side of this book. Moreover, it provides concise but thorough coverage of the practical and theoretical aspects of the analytical techniques used to characterize a wide variety of functional nanomaterials. The book provides an overview of widely used characterization techniques for a broad audience: from beginners and graduate students, to advanced specialists in both academia and industry.
