Download or read book A Review on Condensation Process of Refrigerants in Horizontal Microfin Tubes written by Thanh Nhan Phan and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer performance of refrigerant on the condensation process is very important in the designing of condensation equipment, especially in air conditioning and refrigeration systems. The outstanding advantages of microfin tubes are reducing the weight and size of condensers and also reducing the amount of refrigerant on the system. Reviewing the general concept of condensation and detailing the formation of flow pattern map that is also the procedure to determine heat transfer coefficient and pressure drop during condensation process of refrigerant inside the horizontal microfin tubes would be considered. Also, a typical example will be presented to illustrate a detailed procedure to calculate the value of heat transfer coefficient and pressure drop during the condensation process in horizontal microfin tubes. The data results show that microfin tube J60 with 60 number of fins inside 8.96 mm inner diameter, 0.2 mm height of fin, 40o of apex angle and 18o of helix angle, the condensation procedure of R1234ze at 35°C, heat flux of 8.62 kW/m2, and mass flux of 222 kg/m2s that could be estimated with heat transfer coefficient would be reduced from 8160.4 [W/m2 K] to 1413.8 [W/m2 K] follow with quality x changes from 0.99 to 0.01, and the maximum pressure drop of this process is 3173.8 [Pa/m].
Download or read book Evaporation and Condensation Heat Transfer and Pressure Drop in Horizontal 12 7 mm Micro fin Tubes with Refrigerant 22 written by L. M. Schlager and published by . This book was released on 1989 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condensation Heat Transfer in Horizontal Micro fin Tubes written by Chea-Chun Kung and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Three existing condensation heat transfer models are validated using 544 experimental data points for pure refrigerants and refrigerant mixtures. The Cavallini et al. (1999) model predicts well with the pure-refrigerant data sets. However, the Cavallini et al. (1999) model fails to predict the refrigerant-mixture data sets. The Yu and Koyama (1998) model, which is applicable for the pure refrigerants only, fails to predict most of the R22 data sets. The Kedzierski and Goncalves (1999) model, which is applicable for both pure refrigerants and refrigerant mixtures, yields relatively high mean absolute deviations for most of the pure-refrigerant data sets. The Kedzierski and Goncalves (1999) model does not account for the mass transfer thermal resistance in refrigerant mixtures. A new pure-refrigerant model and a new refrigerant-mixture semi-empirical model have been developed. Both the new models successfully predict the experimental data for pure refrigerant and for refrigerant mixtures.
Download or read book Horizontal Convective Condensation of Alternative Refrigerants Within a Micro Fin Tube Classic Reprint written by Mark a Kedzierski and published by Forgotten Books. This book was released on 2017-10-28 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Horizontal Convective Condensation of Alternative Refrigerants Within a Micro-Fin Tube As shown in Fig. 3, six refrigerant pressure taps along the test section allowed the measurement of the upstream absolute pressure and five pressure drops along the test section. Two sets of two water pressure taps were used to measure the water pressure drop along each tube. Also, a sheathed thermocouple measured the refrigerant temperature at each end of the two refrigerant tubes, with the junction of each centered radially. Only the thermocouple at the inlet of the first tube was used in the calculations. Theentire test section was wrapped with 5 cm of foam insulation to minimize heat transfer between the water and the ambient. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book A Review on Convective Boiling Heat Transfer of Refrigerants in Horizontal Microfin Tubes written by Thanh Nhan Phan and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the Heat transfer performance of refrigerant for convective boiling in horizontal microfin tube and smooth tube is place an importance role on the designing of evaporator, the main equipment on refrigeration system. Reviewing the general concept especially the theory of boiling in the tube, the formation of the flow pattern map, the calculating procedure for heat transfer coefficient and pressure drop during boiling process of refrigerant in microfin tube. Besides, a typical example will be presented more detail in step by step to define the heat transfer coefficient and pressure drop for one working condition to estimate the data results without doing experiments.
Download or read book Condensation Heat Transfer in Horizontal Micro fin Tubes written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Three existing condensation heat transfer models are validated using 544 experimental data points for pure refrigerants and refrigerant mixtures. The Cavallini et al. (1999) model predicts well with the pure-refrigerant data sets. However, the Cavallini et al. (1999) model fails to predict the refrigerant-mixture data sets. The Yu and Koyama (1998) model, which is applicable for the pure refrigerants only, fails to predict most of the R22 data sets. The Kedzierski and Goncalves (1999) model, which is applicable for both pure refrigerants and refrigerant mixtures, yields relatively high mean absolute deviations for most of the pure-refrigerant data sets. The Kedzierski and Goncalves (1999) model does not account for the mass transfer thermal resistance in refrigerant mixtures. A new pure-refrigerant model and a new refrigerant-mixture semi-empirical model have been developed. Both the new models successfully predict the experimental data for pure refrigerant and for refrigerant mixtures.
Download or read book Heat Transfer written by Salim Newaz Kazi and published by BoD – Books on Demand. This book was released on 2023-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamentals, enhancements, applications, and modeling of heat transfer phenomena. Topics covered include heat transfer equations and applications in the estimation of heat energy transportation, heat transfer in specific applications, microchannel flow, condensation of refrigerants in modified heat exchanger tubes, alteration of tube surface texture for augmentation of heat transfer, boiling, etc. Also considered are fouling mitigation approaches to prolong heat exchanger operation, as well as tube coatings, heat exchanger digital twins, and various surface alteration techniques. Double-pass solar air heating and phenomena including heat transfer through thin liquid film and surface texture alteration for boiling heat transfer are discussed.
Download or read book Empirical Study of New Refrigerant Flow Condensation Inside Horizontal Smooth and Micro fin Tubes written by Liangyou Tang and published by . This book was released on 1997 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer Performance During In tube Condensation in Horizontal Smooth Micro fin and Herringbone Tubes written by Adriaan Lambrechts and published by . This book was released on 2003 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pollutant emission control in energy conversion process written by Zongliang Zuo and published by Frontiers Media SA. This book was released on 2023-03-16 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia Of Two phase Heat Transfer And Flow I Fundamentals And Methods A 4 volume Set written by John R Thome and published by World Scientific. This book was released on 2015-08-14 with total page 1109 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the two-set series is to present a very detailed and up-to-date reference for researchers and practicing engineers in the fields of mechanical, refrigeration, chemical, nuclear and electronics engineering on the important topic of two-phase heat transfer and two-phase flow. The scope of the first set of 4 volumes presents the fundamentals of the two-phase flows and heat transfer mechanisms, and describes in detail the most important prediction methods, while the scope of the second set of 4 volumes presents numerous special topics and numerous applications, also including numerical simulation methods.Practicing engineers will find extensive coverage to applications involving: multi-microchannel evaporator cold plates for electronics cooling, boiling on enhanced tubes and tube bundles, flow pattern based methods for predicting boiling and condensation inside horizontal tubes, pressure drop methods for singularies (U-bends and contractions), boiling in multiport tubes, and boiling and condensation in plate heat exchangers. All of these chapters include the latest methods for predicting not only local heat transfer coefficients but also pressure drops.Professors and students will find this 'Encyclopediaa of Two-Phase Heat Transfer and Flow' particularly exciting, as it contains authored books and thorough state-of-the-art reviews on many basic and special topics, such as numerical modeling of two-phase heat tranfser and adiabatic bubbly and slug flows, the unified annular flow boiling model, flow pattern maps, condensation and boiling theories, new emerging topics, etc.
Download or read book Horizontal Convective Condensation of Alternative Refrigerants Within a Micro fin Tube written by Mark A. Kedzierski and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the ASME Fluids Engineering Division Summer Conference 2006 Forums written by American Society of Mechanical Engineers. Fluids Engineering Division and published by . This book was released on 2006 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer in Condensation and Boiling written by Karl Stephan and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: I welcome the opportunity to have my book translated, because of the great emphasis on two-phase flow and heat transfer in the English-speaking world, as related to research, university education, and industrial practice. The 1988 Springer-Verlag edition of "Warmeiibergang beim Kondensieren und beim Sieden" has been enlarged to include additional material on falling film evaporation (Chapter 12) and pressure drop in two-phase flow (Chapter 13). Minor errors in the original text have also been corrected. I would like to express my sincere appreciation to Professor Green, Asso ciate Professor of German at Rensselaer, for his excellent translation and co operation. My thanks go also to Professor Bergles for his close attention to technical and linguistic details. He carefully read the typescript and made many comments and suggestions that helped to improve the manuscript. I hope that the English edition will meet with' a favorable reception and contribute to better understanding and to progress in the field of heat transfer in condensation and boiling. February 1992 K. Stephan Preface to the German-Language Edition This book is a continuation of the series "Heat and Mass Transfer" edited by U. Grigull, in which three volumes have already been published. Its aim is to acquaint students and practicing engineers with heat transfer during condensa tion and boiling, and is intended primarily for students and engineers in mechanical, chemical, electrical, and industrial processing engineering.
Download or read book Condensation of Hfc 134a and Hfc 404a in a Smooth and Micro Fin Tube written by Pradeep Patil and published by LAP Lambert Academic Publishing. This book was released on 2011-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this work was to study the condensation heat transfer and pressure drop characteristics ofHFC-134a in a micro-fined tube with an 18 degree helix angle and to compare them to those in a smooth tube for various operating conditions.The experimental test facility is designed, developed and is used to determine the condensation HTC and pressure drop in smooth and micro-fin tubes for various HFC refrigerants namely HFC-134a, R-404A, R-407C, R-507A. The experimentation covers wide range of operating parameters such as mass flux and condensing temperatures. The instrumentations used for measurements are calibrated from recognized calibration centres. The hermetically sealed compressor is used for circulating refrigerant; effect of oil present in the refrigerant during condensation is also taken into account. The condensation of HFC-134a and R-404A in smooth and micro-fin tubes are measured and obtained the values of condensation HTCs and pressure drops for different mass flux and condensing temperatures
Download or read book Condensation of Refrigerant 11 on the Outside of Horizontal and Inclined Enhanced Tubes written by N. Domingo and published by . This book was released on 1982 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condensation of Hydrocarbon and Zeotropic Hydrocarbon refrigerant Mixtures in Horizontal Tubes written by Jeffrey A. Milkie and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental investigation of condensation of hydrocarbons and hydrocarbon/refrigerant mixtures in horizontal tubes was conducted. Heat transfer coefficients and frictional pressure drops during condensation of a zeotropic binary mixture of R245fa and n-pentane in a 7.75 mm internal diameter round tube were measured across the entire vapor-liquid dome, for mass fluxes ranging from 150 to 600 kg m-2 s-1, and reduced pressures ranging from 0.06 to 0.23. Condensation experiments were conducted for the mixture, as well as its pure constituents over a similar range of conditions. In addition, condensing flow of the hydrocarbon propane was documented visually using high-speed video recordings. Results from these experiments were used to establish the two-phase flow regimes, void fractions, and liquid film thicknesses during condensation of propane flowing through horizontal tubes with internal diameters of 7 and 15 mm. These measurements were made over mass fluxes ranging from 75 to 450 kg m-2 s-1, operating pressures ranging from 952 to 1218 kPa, and vapor qualities ranging from 0.05 to 0.95. Liquid film thickness and void fraction data were subsequently be used to assist the development of heat transfer and pressure drop models. In particular, the heat transfer coefficients and pressure drops observed in the mixture were compared with the corresponding values for the pure constituents. Models for heat transfer and pressure drop in the pure components as well as the mixtures were developed based on the data from the present study. This work extends the available literature on two-phase flow regimes for air-water mixtures, steam, and refrigerants to include hydrocarbons. Additionally, the limited information on condensation in multi-constituent hydrocarbon-hydrocarbon and refrigerant-refrigerant mixtures was extended to include hydrocarbon-refrigerant mixtures. The findings of this study are expected to benefit applications such as refrigeration, low-grade heat-driven power generation, and the development of heat exchangers for the chemical and process industries.
