Download or read book A Review of Water Repellent Finishes and Coatings written by AATT Council on Technology. Subcommittee on Water Repellency and published by . This book was released on 1970 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Review of Water Repellent Finishes and Coatings written by American Association for Textile Technology and published by . This book was released on 1970 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Waterproof and Water Repellent Textiles and Clothing written by John T Williams and published by Woodhead Publishing. This book was released on 2017-11-21 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waterproof and Water Repellent Textiles and Clothing provides systematic coverage of the key types of finishes and high performance materials, from conventional wax and silicone, through controversial, but widely used fluoropolymers and advanced techniques, such as atmospheric plasma deposition and sol-gel technology. The book is an essential resource for all those engaged in garment development, production and finishing, and for academics engaged in research into apparel technology and textile science. Rapid innovation in this field is driving new performance demands in many areas, including the sporting and military sectors. However, another innovation driver is the regulatory framework in the USA, Europe and globally, addressing both health concerns (e.g. with PFOS / PFOA) and environmental impacts (e.g. C8 fluorocarbon finishes). Both of these aspects are fully covered, along with the replacement materials / technologies currently available and under development. In addition, oleophobic and multifunctional coatings are discussed, as are aspects of performance, testing and applications in sportswear, protective clothing, and footwear. Introduces innovative materials and technologies, exploring their current and potential use across different sectors Provides expert guidance on the health and environmental aspects of key waterproof materials and coatings and their associated regulations Demystifies testing processes and design principles

Download or read book Innovative and Emerging Technologies for Textile Dyeing and Finishing written by Luqman Jameel Rather and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the public enhanced awareness towards eco-preservation, eco-safety and health concerns, environmentally benign, nontoxic and sustainable bioresource materials produced mainly from non-food crops have revolutionized all industrial sectors particularly textile industry. In recent years, textile industries in developed countries are getting increasing interest in global interest due to the varied and changing world market conditions in terms of price, durability and fiber mixtures as well as design, colors, weight, ease of handling and product safety. The increasing environmental and health concerns owing to the use of large quantities of water and hazardous chemicals in conventional textile finishing processes lead to the design and development of new dyeing strategies and technologies. Effluents produced from these textiles wet processing industries are very diverse in chemical composition, ranging from inorganic finishing agents, surfactants, chlorine compounds, salts, total phosphate to polymers and organic products. This aspect forced western countries to exploit their high technical skills in the advancements of textile materials for high quality technical performances, and development of cleaner production technologies for cost effective and value-added textile materials. Therefore, vast and effective research investigations have been undertaken all over the world to minimize the negative environmental impact of synthetic chemical agents through the sustainable harvest of eco-friendly bioresource materials. The book will discuss following research developments in academic and industry: Improvement in dye extraction and its applications Impact of textile dyeing on environment Textile finishing by natural and ecofriendly means Natural dyes as environmental-friendly bioresource products Textile effluent remediation via physical, chemical and biological processes.

Download or read book Advances in the Dyeing and Finishing of Technical Textiles written by M. L. Gulrajani and published by Elsevier. This book was released on 2013-02-08 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of distinctive colourants and finishes has a significant impact on the aesthetic appeal and functionality of technical textiles. Advances in the textile chemical industry facilitate production of diverse desirable properties, and are therefore of great interest in the production of textile products with enhanced performance characteristics. Drawing on key research, Advances in the dyeing and finishing of technical textiles details important advances in this field and outlines their development for a range of applications.Part one reviews advances in dyes and colourants, including chromic materials, optical effect pigments and microencapsulated colourants for technical textile applications. Other types of functional dyes considered include UV- absorbent, anti-microbial and water-repellent dyes. Regulations relating to the use of textile dyes are discussed before part two goes on to investigate such advances in finishing techniques as mechanical finishing, softening treatments and the use of enzymes. Surfactants, Inkjet printing of technical textiles and functional finishes to improve the comfort and protection of apparel are also explored. The use of nanotechnology in producing hydrophobic, super-hydrophobic and antimicrobial finishes is dealt with alongside coating and lamination techniques, before the book concludes with a discussion of speciality polymers for the finishing of technical textiles.With its distinguished editor and international team of expert contributors, Advances in the dyeing and finishing of technical textiles is a comprehensive guide for all those involved in the development, production and application of technical textiles, including textile chemists, colour technologists, colour quality inspectors, product developers and textile finishers. Discusses important advances in the textile chemical industry Considers developments in various dyes and colourants used in the industry, including water repellent, functional and anti-microbial dyes Chapters also examine advances in finishing techniques, the use of nanotechnology and speciality polymers in technical textiles

Download or read book Sustainable Practices in the Textile Industry written by Luqman Jameel Rather and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing environmental and health concerns owing to the use of large quantities of water and hazardous chemicals in conventional textile finishing processes has lead to the design and development of new dyeing strategies and technologies. Sustainable Practices in the Textile Industry comprises 13 chapters from various research areas dealing with the application of different sustainable technologies for enhancing the dyeing and comfort properties of textile materials with substantial reduction in wastewater problems. Chapters focus on the sophisticated methods for improving dye extraction and dyeing properties which will minimize the use of bioresource products. This book also brings out the innovative ways of wet chemical processing to alleviate the environmental impacts arising from this sector. This book also discusses innovations in eco-friendly methods for textile wet processes and applications of enzymes in textiles in addition to the advancements in the use of nanotechnology for wastewater remediation.

Download or read book UV curable Coatings for Water repellent Carpet Finishes written by ́ Alice E. Baillie and published by . This book was released on 2003 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Frontiers of Textile Materials written by Mohd Shabbir and published by John Wiley & Sons. This book was released on 2020-03-17 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book “Frontiers and Textile Materials will deal with the important materials that can be utilized for value-addition and functionalization of textile materials. The topics covered in this book includes the materials like enzymes, polymers, etc. that are utilized for conventional textile processing and the advanced materials like nanoparticles which are expected to change the horizons of textiles. The futuristic techniques for textile processing like plasma are also discussed.

Download or read book Wood Modification Technologies written by Dick Sandberg and published by CRC Press. This book was released on 2021-07-15 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market for durable products using modified wood has increased substantially during the last few years. This is partly because of the restriction on the use of toxic preservatives due to environmental concerns, and to lower maintenance cost and time. Furthermore, as sustainability becomes a greater concern, the environmental impact of construction and interior materials is factored in planning by considering the whole life cycle and embodied energy of the materials used. Wood is modified to improve its intrinsic properties, enhance the range of applications of timber, and to acquire the form and functionality desired by engineers without calling the environmental friendliness into question. Wood modification processes are at various stages of development, and the challenges faced in scaling up to industrial applications differ. The aim of this book is to put together the key elements of the changes of wood constituents and the related changes in wood properties of modified wood. Further, a selection of the principal technologies implemented in wood modification are presented. This work is intended for researchers, professionals of timber construction, as well as students studying the science of materials, civil engineering and architecture. This work is not exhaustive, but intends to deliver an outline of the scientific disciplines necessary to apprehend the technologies of wood modification and its behavior during treatment, as well as during its use.

Download or read book AATCC Review written by and published by . This book was released on 2005 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water and Oil Repellent Surfaces written by Ioannis Karapanagiotis and published by MDPI. This book was released on 2020-11-18 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials of extreme wetting properties have received significant attention, as they offer new perspectives providing numerous potential applications. Water- and oil-repellent surfaces can be used, for instance, in the automobile, microelectronics, textile and biomedical industries; in the protection and preservation of constructions, buildings and cultural heritage; and in several other applications relevant to self-cleaning, biocide treatments, oil–water separation and anti-corrosion, just to name a few. The papers included in this book present innovative production methods of advanced materials with extreme wetting properties that are designed to serve some of the abovementioned applications. Moreover, the papers explore the scientific principles behind these advanced materials and discuss their applications to different areas of coating technology.

Download or read book Surface Modification of Textiles written by Q Wei and published by Elsevier. This book was released on 2009-08-26 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of textiles offers an important platform for functional modifications in order to meet special requirements for a variety of applications. The surface modification of textiles may be achieved by various techniques ranging from traditional solution treatment to biological approaches. This book reviews fundamental issues relating to textile surfaces and their characterisation and explores the exciting opportunities for surface modification of a range of different textiles. Introductory chapters review some important surface modification techniques employed for improved functional behaviour of textiles and the various surface characterisation methods available. Further chapters examine the different types of surface modification suitable for textiles, ranging from the use of plasma treatments and physical vapour deposition to the use of nanoparticles. Concluding chapters discuss surface modification strategies for various applications of textiles. Surface modification of textiles is a valuable resource for chemists, surface scientists, textile technologists, fibre scientists, textile engineers and textile students. Reviews fundamental issues relating to textiles surfaces and their characterisation Examines various types of surface modification suitable for textiles, including plasma treatments and nanoparticles Discusses surface modification strategies for textile applications such as expansion into technical textile applications

Download or read book Coated Textiles written by Ashish Kumar Sen and published by CRC Press. This book was released on 2001-05-08 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gore-Tex, chemical protective clothing, architectural fabrics, air bags Intensive research and development in coated-fabric materials and processes has led to new and improved products for a wide range of consumer, industrial, medical, and military applications. Coated Textiles: Principles and Applications provides the first comprehensive, up-to-da

Download or read book Ciba Review written by CIBA-GEIGY Limited and published by . This book was released on 1972 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Temperature on the Efficiency of Water Repellent Finishes written by Hans George Walz and published by . This book was released on 1943 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Textile Finishing written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2017-08-24 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book details the recent and exciting developments on various fronts in the textile field with regard to novel and innovative functionalities, as well as their applications in various industries. Technical textiles are used in various industries for a host of purposes and applications. Recent developments in novel and innovative functionalities to textiles include easy-to-clean or dirt-repellent, flame retardancy, anti-bacterial, and fog-harvesting properties. Textiles for electronics based on graphene, CNTs and other nanomaterials, conductive textiles, textiles for sensor function, textile-fixed catalysts, textiles for batteries and energy storage, textiles as substrates for tissue engineering, and textiles for O/W separation are prevalent as well. All this development has been made possible through adopting novel ways for finishing textiles, e.g., by appropriate surface modification techniques, and utilizing biomimetic concepts borrowed from nature. This unique book is divided into four parts: Part 1: Recent Developments/Current Challenges in Textile Finishing; Part 2: Surface Modification Techniques for Textiles; Part 3: Innovative Functionalities of Textiles; Part 4: Fiber-Reinforced Composites. The topics covered include: Antimicrobial textile finishes; flame retardant textile finishing; "self-cleaning" or easy-to-clean textiles; metallization of textiles; atmospheric pressure plasma, and UV-based photochemical surface modification of textiles; tunable wettability of textiles; 3D textile structures for fog harvesting; textile-fixed catalysts; medical textiles as substrates for tissue engineering; and fiber-reinforced "green" or "greener" biocomposites and the relevance of fiber/matrix adhesion.

Download or read book Chemical Finishing of Textiles written by W D Schindler and published by Elsevier. This book was released on 2004-08-10 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role of the textile finisher has become increasingly demanding, and now requires a careful balance between the compatibility of different finishing products and treatments and the application processes used to provide textiles with desirable properties. In one comprehensive book, Chemical finishing of textiles details the fundamentals of final chemical finishing, covering the range of effects that result from the interplay between chemical structures and finishing products.After an introductory chapter covering the importance of chemical finishing, the following chapters focus on particular finishing techniques, from softening, easy-care and permanent press, non-slip and soil-release, to flame-retardant, antistatic and antimicrobial. Within each chapter, sections include an introduction, mechanisms, chemistries, applications, evaluations and troubleshooting. The book concludes with a chapter on the future trends in chemical finishing.Chemical finishing of textiles is an essential reference for all academic and industrial textile chemists and for those studying textile education programmes. Discusses the advantages and disadvantages of every important type of chemical finish Combines technical understanding and practical experience concisely Essential tool to assist in the demanding challenge of chemical finishing for textiles