Download or read book A Review of Fracture Mechanics Life Technology written by Philip M. Besuner and published by . This book was released on 1986 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lifetime prediction technology for structural components subjected to cyclic loads is examined. The central objectives of the project are: (1) to report the current state of the art, and (2) recommend future development of fracture mechanics-based analytical tools for modeling subcritical fatigue crack growth in structures. Of special interest is the ability to apply these tools to practical engineering problems and the developmental steps necessary to bring vital technologies to this stage. The authors conducted a survey of published literature and numerous discussions with experts in the field of fracture mechanics life technology. One of the key points made is that fracture mechanics analyses of crack growth often involve consideration of fatigue and fracture under extreme conditions. Therefore, inaccuracies in predicting component lifetime will be dominated by inaccuracies in environment and fatigue crack growth relations, stress intensity factor solutions, and methods used to model given loads and stresses. Suggestions made for reducing these inaccuracies include development of improved models of subcritical crack growth, research efforts aimed at better characterizing residual and assembly stresses that can be introduced during fabrication, and more widespread and uniform use of the best existing methods.
Download or read book A Review of Fracture Mechanics Life Technology written by Philip M. Besuner and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of Fracture Mechanics Life Technology written by P. M. Besuner and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Practical Use of Fracture Mechanics written by D. Broek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the use of fracture mechanics for the solution of practical problems; academic rigor is not at issue and dealt with only in as far as it improves insight and understanding; it often concerns secondary errors in engineering. Knowledge of (ignorance of) such basic input as loads and stresses in practical cases may cause errors far overshadowing those introduced by shortcomings of fracture mechanics and necessary approximations; this is amply demonstrated in the text. I have presented more than three dozen 40-hour courses on fracture mechanics and damage tolerance analysis, so that I have probably more experience in teaching the subject than anyone else. I learned more than the students, and became cognizant of difficulties and of the real concerns in applications. In particular I found, how a subject should be explained to appeal to the practicing engineer to demonstrate that his practical problem can indeed be solved with engineering methods. This experience is reflected in the presenta tions in this book. Sufficient background is provided for an understanding of the issues, but pragamatism prevails. Mathematics cannot be avoided, but they are presented in a way that appeals to insight and intuition, in lieu of formal derivations which would show but the mathematical skill of the writer.
Download or read book Fracture and Life written by Brian Cotterell and published by World Scientific. This book was released on 2010 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an interdisciplinary review of the effect of fracture on life, following the development of the understanding of fracture written from a historical perspective. After a short introduction to fracture, the first section of the book covers the effects of fracture on the evolution of the Earth, plants and animals, and man. The second section of the book covers the largely empirical control of fracture from ancient times to the end of the nineteenth century. The final section reviews the development of fracture theory as a discipline and its application during the twentieth century through to the present time.
Download or read book Progress in Fracture Mechanics written by G. C. Sih and published by Elsevier. This book was released on 2014-06-28 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Fracture Mechanics: Fracture Mechanics Research and Technological Activities of Nations around the World is a collection of papers that presents the contemporary state of fracture mechanics research in different countries. This collection arises from the need to access various fracture mechanics materials in one publication, since fracture mechanics varies in parameters, methods of testing, and jargons. This text will be of great use to students, researchers, and practitioners of materials science.
Download or read book Advanced Fracture Mechanics and Structural Integrity written by Ashok Saxena and published by CRC Press. This book was released on 2019-02-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fracture Mechanics and Structural Integrity is organized to cover quantitative descriptions of crack growth and fracture phenomena. The mechanics of fracture are explained, emphasizing elastic-plastic and time-dependent fracture mechanics. Applications are presented, using examples from power generation, aerospace, marine, and chemical industries, with focus on predicting the remaining life of structural components and advanced testing metods for structural materials. Numerous examples and end-of-chapter problems are provided, along with references to encourage further study.The book is written for use in an advanced graduate course on fracture mechanics or structural integrity.
Download or read book Fracture Mechanics written by Surjya Kumar Maiti and published by Cambridge University Press. This book was released on 2015-10 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers detailed treatment on fundamental concepts of fracture mechanics. The text is useful for undergraduate students, graduate students and researchers.
Download or read book Role of Fracture Mechanics in Modern Technology written by George C. Sih and published by North Holland. This book was released on 1987 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Introduction to Fracture Mechanics written by Robert O. Ritchie and published by Elsevier. This book was released on 2021-06-23 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Fracture Mechanics presents an introduction to the origins, formulation and application of fracture mechanics for the design, safe operation and life prediction in structural materials and components. The book introduces and informs the reader on how fracture mechanics works and how it is so different from other forms of analysis that are used to characterize mechanical properties. Chapters cover foundational topics and the use of linear-elastic fracture mechanics, involving both K-based characterizing parameter and G-based energy approaches, and how to characterize the fracture toughness of materials under plane-strain and non plane-strain conditions using the notion of crack-resistance or R-curves. Other sections cover far more complex nonlinear-elastic fracture mechanics based on the use of the J-integral and the crack-tip opening displacement. These topics largely involve continuum mechanics descriptions of crack initiation, slow crack growth, eventual instability by overload fracture, and subcritical cracking. Presents how, for a given material, a fracture toughness value can be measured on a small laboratory sample and then used directly to predict the failure (by fracture, fatigue, creep, etc.) of a much larger structure in service Covers the rudiments of fracture mechanics from the perspective of the philosophy underlying the few principles and the many assumptions that form the basis of the discipline Provides readers with a "working knowledge" of fracture mechanics, describing its potency for damage-tolerant design, for preventing failures through appropriate life-prediction strategies, and for quantitative failure analysis (fracture diagnostics)
Download or read book Advances in Structural Adhesive Bonding written by David A. Dillard and published by Elsevier. This book was released on 2010-03-31 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding is often effective, efficient, and often necessary way to join mechanical structures. This important book reviews the most recent improvements in adhesive bonding and their wide-ranging potential in structural engineering. Part one reviews advances in the most commonly used groups of structural adhesives with chapters covering topics such as epoxy, polyurethane, silicone, cyanoacrylate, and acrylic adhesives. The second set of chapters covers the various types of adherends and pre-treatment methods for a range of structural materials such as metals, composites and plastics. Chapters in Part three analyse methods and techniques with topics on joint design, life prediction, fracture mechanics and testing. The final group of chapters gives useful and practical insights into the problems and solutions of adhesive bonding in a variety of hostile environments such as chemical, wet and extreme temperatures. With its distinguished editor and international team of contributors, Advances in structural adhesive bonding is a standard reference for structural and chemical engineers in industry and the academic sector. Reviews advances in the most commonly used groups of structural adhesives including epoxy, silicone and acrylic adhesives Examines key issues in adhesive selection featuring substrate compatibility and manufacturing demands Documents advances in bonding metals, plastics and composites recognising problems and limitations
Download or read book Advances in Fracture Research written by B.L. Karihaloo and published by Elsevier. This book was released on 2012-12-02 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture is a major cause of failure in metallic and non-metallic materials and structures. An understanding of the micro- and macro- mechanisms of fracture enables materials scientists to develop materials with high fracture resistance, which in turn helps engineers and designers to ensure the soundness and integrity of structures made from these materials. The International Congress on Fracture is held every four years and is an occasion to take stock of the major achievements in the broad field of fracture, to honour those who have made lasting contributions to this field, and to reflect on the future directions. ICF9 is published in six volumes covering the areas of:-- Failure Analysis, Remaining Life Assessment, Life Extension and Repair- Failure of Multiphase and Non-Metallic Materials- Fatigue of Metallic and Non-Metallic Materials and Structures- Theoretical and Computational Fracture Mechanics and New Directions- Testing and Characterization Methods, and Interfacial Fracture Mechanics- High Strain Rate Fracture and Impact Mechanics.
Download or read book NASA Tech Briefs written by and published by . This book was released on 1985 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture and Fatigue Control in Structures written by John M. Barsom and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation An introduction for practicing engineers or students at the beginning graduate or advanced undergraduate level, emphasizing the application of fracture mechanics to preventing fracture and fatigue failures in structures, rather than the theoretical aspects of the field. The topics include stress analysis for members with cracks, resistance forces, fatigue crack initiation, and fitness for service. Among the case studies are bridges, oil tankers, and steel casings. The earlier editions were in 1977 and 1987. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Stochastic Crack Propagation written by Giora Maymon and published by Academic Press. This book was released on 2018-01-02 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stochastic Crack Propagation: Essential Practical Aspects describes a feature important to the analysis of stochastic crack propagation, starting with essential background theory. Processes, or phenomena, which are of practical importance in the work of design engineers or R&D teams are described chapter by chapter. Many examples are described and supported by listed references, and files of data that can be used with specialist software to practice design situations are included. Advice on how to use various computer programs to design and predict for stochastic crack growth is also provided, giving professionals a complete guide. Presents instructions and exercises in the ideal format for professionals, focusing on applications Explains a methodology on how to optimize the engineering design process by including stochastic crack growth behavior Provides computational files to help readers get up-to-speed with design using programs like ANSYS and NASTRAN for stochastic crack growth
Download or read book Fracture Mechanics Analysis of the Effects of Residual Stress on Fracture Life written by Joseph F. Throop and published by . This book was released on 1982 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is re-emphasized here that the effect of residual stress in fatigue is analogous to but not the same as the mean stress effect from applied loads. The inclusion of a residual stress term in the stress intensity factor range of the fatigue crack propagation rate equation permits one to use the residual stress in calculations of fatigue life estimates. Using crack shape factors calculated for given aspect ratios of surface flaws and integrating da/dN, one obtains an equation for the S-N curve which includes the residual stress effect on fatigue performance. This process of calculation reveals that compressive residual stress has a much stronger influence on fatigue life than tensile residual stress does, mainly because the former decreases the stress intensity factor range and increases the critical crack size while the latter only decreases the critical crack size. Numerical solution of an example illustrates an application of these concepts.
