Download or read book Reconfigurable Field Programmable Gate Arrays for Mission Critical Applications written by Niccolò Battezzati and published by Springer Science & Business Media. This book was released on 2010-11-09 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems applications that are either mission or safety-critical usually entail low- to mid- production volumes, require the rapid development of specific tasks, which are typically computing intensive, and are cost bounded. The adoption of re-configurable FPGAs in such application domains is constrained to the availability of suitable techniques to guarantee the dependability requirements entailed by critical applications. This book describes the challenges faced by designers when implementing a mission- or safety-critical application using re-configurable FPGAs and it details various techniques to overcome these challenges. In addition to an overview of the key concepts of re-configurable FPGAs, it provides a theoretical description of the failure modes that can cause incorrect operation of re-configurable FPGA-based electronic systems. It also outlines analysis techniques that can be used to forecast such failures and covers the theory behind solutions to mitigate fault effects. This book also reviews current technologies available for building re-configurable FPGAs, specifically SRAM-based technology and Flash-based technology. For each technology introduced, theoretical concepts presented are applied to real cases. Design techniques and tools are presented to develop critical applications using commercial, off-the-shelf devices, such as Xilinx Virtex FPGAs, and Actel ProASIC FPGAs. Alternative techniques based on radiation hardened FPGAs, such as Xilinx SIRF and Atmel ATF280 are also presented. This publication is an invaluable reference for anyone interested in understanding the technologies of re-configurable FPGAs, as well as designers developing critical applications based on these technologies.
Download or read book Ionizing Radiation Effects in MOS Devices and Circuits written by T. P. Ma and published by John Wiley & Sons. This book was released on 1989-04-18 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive overview describing the effects of ionizing radiation on MOS devices, as well as how to design, fabricate, and test integrated circuits intended for use in a radiation environment. Also addresses process-induced radiation effects in the fabrication of high-density circuits. Reviews the history of radiation-hard technology, providing background information for those new to the field. Includes a comprehensive review of the literature and an annotated listing of research activities in radiation-hardness research.
Download or read book Robotic Computing on FPGAs written by Shaoshan Liu and published by Morgan & Claypool Publishers. This book was released on 2021-06-30 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of the state-of-the-art field-programmable gate array (FPGA)-based robotic computing accelerator designs and summarizes their adopted optimized techniques. This book consists of ten chapters, delving into the details of how FPGAs have been utilized in robotic perception, localization, planning, and multi-robot collaboration tasks. In addition to individual robotic tasks, this book provides detailed descriptions of how FPGAs have been used in robotic products, including commercial autonomous vehicles and space exploration robots.
Download or read book The Design Warrior s Guide to FPGAs written by Clive Maxfield and published by Elsevier. This book was released on 2004-06-16 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Programmable Gate Arrays (FPGAs) are devices that provide a fast, low-cost way for embedded system designers to customize products and deliver new versions with upgraded features, because they can handle very complicated functions, and be reconfigured an infinite number of times. In addition to introducing the various architectural features available in the latest generation of FPGAs, The Design Warrior's Guide to FPGAs also covers different design tools and flows.This book covers information ranging from schematic-driven entry, through traditional HDL/RTL-based simulation and logic synthesis, all the way up to the current state-of-the-art in pure C/C++ design capture and synthesis technology. Also discussed are specialist areas such as mixed hardward/software and DSP-based design flows, along with innovative new devices such as field programmable node arrays (FPNAs). Clive "Max" Maxfield is a bestselling author and engineer with a large following in the electronic design automation (EDA)and embedded systems industry. In this comprehensive book, he covers all the issues of interest to designers working with, or contemplating a move to, FPGAs in their product designs. While other books cover fragments of FPGA technology or applications this is the first to focus exclusively and comprehensively on FPGA use for embedded systems. - First book to focus exclusively and comprehensively on FPGA use in embedded designs - World-renowned best-selling author - Will help engineers get familiar and succeed with this new technology by providing much-needed advice on choosing the right FPGA for any design project
Download or read book FPGA Architecture written by Ian Kuon and published by Now Publishers Inc. This book was released on 2008 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the historical development of programmable logic devices, the fundamental programming technologies that the programmability is built on, and then describes the basic understandings gleaned from research on architectures. It is an invaluable reference for engineers and computer scientists.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bebop to the Boolean Boogie written by Clive Maxfield and published by Newnes. This book was released on 2008-12-05 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: This entertaining and readable book provides a solid, comprehensive introduction to contemporary electronics. It's not a "how-to-do" electronics book, but rather an in-depth explanation of how today's integrated circuits work, how they are designed and manufactured, and how they are put together into powerful and sophisticated electronic systems. In addition to the technical details, it's packed with practical information of interest and use to engineers and support personnel in the electronics industry. It even tells how to pronounce the alphabet soup of acronyms that runs rampant in the industry. - Written in conversational, fun style that has generated a strong following for the author and sales of over 14,000 copies for the first two editions - The Third Edition is even bigger and better, with lots of new material, illustrations, and an expanded glossary - Ideal for training incoming engineers and technicians, and for people in marketing or other related fields or anyone else who needs to familiarize themselves with electronics terms and technology
Download or read book Digital Integrated Circuit Design written by Hubert Kaeslin and published by Cambridge University Press. This book was released on 2008-04-28 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical, tool-independent guide to designing digital circuits takes a unique, top-down approach, reflecting the nature of the design process in industry. Starting with architecture design, the book comprehensively explains the why and how of digital circuit design, using the physics designers need to know, and no more.
Download or read book Designing with FPGAs and CPLDs written by Bob Zeidman and published by CRC Press. This book was released on 2002-01-09 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Choose the right programmable logic devices and development tools * Understand the design, verification, and testing issues * Plan schedules and allocate resources efficiently Choose the right programmable logic devices with this guide to the technolog
Download or read book Digital System Design written by Dawoud Shenouda Dawoud and published by River Publishers. This book was released on 2010-04-10 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, embedded systems are widely deployed in just about every piece of machinery from toasters to spacecrafts, and embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but, more importantly, to satisfy numerous other constraints. To achieve these current goals, the designer must be aware of such design constraints and, more importantly, the factors that have a direct effect on them. One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand: single-purpose, general-purpose, or application specific. Microcontrollers are one member of the family of the application specific processors. Digital System Design concentrates on the use of a microcontroller as the embedded system's processor and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontrollers and is ideal for undergraduate students and engineers that are working in the field of digital system design.
Download or read book Digital Design and Implementation with Field Programmable Devices written by Zainalabedin Navabi and published by Springer Science & Business Media. This book was released on 2006-02-28 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is on digital system design for programmable devices, such as FPGAs, CPLDs, and PALs. A designer wanting to design with programmable devices must understand digital system design at the RT (Register Transfer) level, circuitry and programming of programmable devices, digital design methodologies, use of hardware description languages in design, design tools and environments; and finally, such a designer must be familiar with one or several digital design tools and environments. Books on these topics are many, and they cover individual design topics with very general approaches. The number of books a designer needs to gather the necessary information for a practical knowledge of design with field programmable devices can easily reach five or six, much of which is on theoretical concepts that are not directly applicable to RT level design with programmable devices. The focus of this book is on a practical knowledge of digital system design for programmable devices. The book covers all necessary topics under one cover, and covers each topic just enough that is actually used by an advanced digital designer. In the three parts of the book, we cover digital system design concepts, use of tools, and systematic design of digital systems. In the first chapter, design methodologies, use of simulation and synthesis tools and programming programmable devices are discussed. Based on this automated design methodology, the next four chapters present the necessary background for logic design, the Verilog language, programmable devices, and computer architectures.
Download or read book Silicon Nanowire Transistors written by Ahmet Bindal and published by Springer. This book was released on 2016-02-23 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the n and p-channel Silicon Nanowire Transistor (SNT) designs with single and dual-work functions, emphasizing low static and dynamic power consumption. The authors describe a process flow for fabrication and generate SPICE models for building various digital and analog circuits. These include an SRAM, a baseband spread spectrum transmitter, a neuron cell and a Field Programmable Gate Array (FPGA) platform in the digital domain, as well as high bandwidth single-stage and operational amplifiers, RF communication circuits in the analog domain, in order to show this technology’s true potential for the next generation VLSI.
Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the application of ferroelectric devices to innovative systems. In particular, the use of these materials as varying capacitors, gyroscope, acoustics sensors and actuators, microgenerators and memory devices will be exposed, providing an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric devices.
Download or read book HVAC Control in the New Millennium written by Michael F. Hordeski and published by The Fairmont Press, Inc.. This book was released on 2001 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1-Heat, Ventilation and Damper Control Trends2-Energy and Power Management, Distributed Control Trends3-Control Technology, Microelectronics and Nanotechnology4-Advance HVAC Control, Information Technology and Open Systems5-PC-based Control, Software and Bus Trends6-Artificial Intelligence, Fuzzy Logic and Control7-Computer Networks and Security8-Systems and Device Networks9-Building automation, Wireless Technology and the InternetIndex
Download or read book Exploring Zynq Mpsoc written by Louise H Crockett and published by . This book was released on 2019-04-11 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the Zynq MPSoC (Multi-Processor System-on-Chip), an embedded device from Xilinx. The Zynq MPSoC combines a sophisticated processing system that includes ARM Cortex-A53 applications and ARM Cortex-R5 real-time processors, with FPGA programmable logic. As well as guiding the reader through the architecture of the device, design tools and methods are also covered in detail: both the conventional hardware/software co-design approach, and the newer software-defined methodology using Xilinx's SDx development environment. Featured aspects of Zynq MPSoC design include hardware and software development, multiprocessing, safety, security and platform management, and system booting. There are also special features on PYNQ, the Python-based framework for Zynq devices, and machine learning applications. This book should serve as a useful guide for those working with Zynq MPSoC, and equally as a reference for technical managers wishing to gain familiarity with the device and its associated design methodologies.
Download or read book Field Programmable Logic and Applications written by Patrick Lysaght and published by Springer Science & Business Media. This book was released on 1999-08-20 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the 9th International Workshop on Field ProgrammableLogic and Applications (FPL’99), hosted by the University of Strathclyde in Glasgow, Scotland, August 30 – September 1, 1999. FPL’99 is the ninth in the series of annual FPL workshops. The FPL’99 programme committee has been fortunate to have received a large number of high-quality papers addressing a wide range of topics. From these, 33 papers have been selected for presentation at the workshop and a further 32 papers have been accepted for the poster sessions. A total of 65 papers from 20 countries are included in this volume. FPL is a subject area that attracts researchers from both electronic engine- ing and computer science. Whether we are engaged in research into soft ha- ware or hard software seems to be primarily a question of perspective. What is unquestionable is that the interaction of groups of researchers from di?erent backgrounds results in stimulating and productive research. As we prepare for the new millennium, the premier European forum for - searchers in ?eld programmable logic remains the FPL workshop. Next year the FPL series of workshopswill celebrate its tenth anniversary.The contribution of so many overseas researchers has been a particularly attractive feature of these events, giving them a truly international perspective, while the informal and convivial atmosphere that pervades the workshops have been their hallmark. We look forward to preserving these features in the future while continuing to expand the size and quality of the events.
Download or read book Implementing Software Defined Radio written by Eugene Grayver and published by Springer Science & Business Media. This book was released on 2012-07-20 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Defined Radio makes wireless communications easier, more efficient, and more reliable. This book bridges the gap between academic research and practical implementation. When beginning a project, practicing engineers, technical managers, and graduate students can save countless hours by considering the concepts presented in these pages. The author covers the myriad options and trade-offs available when selecting an appropriate hardware architecture. As demonstrated here, the choice between hardware- and software-centric architecture can mean the difference between meeting an aggressive schedule and bogging down in endless design iterations. Because of the author’s experience overseeing dozens of failed and successful developments, he is able to present many real-life examples. Some of the key concepts covered are: Choosing the right architecture for the market – laboratory, military, or commercial, Hardware platforms – FPGAs, GPPs, specialized and hybrid devices, Standardization efforts to ensure interoperability and portabilitym State-of-the-art components for radio frequency, mixed-signal, and baseband processing. The text requires only minimal knowledge of wireless communications; whenever possible, qualitative arguments are used instead of equations. An appendix provides a quick overview of wireless communications and introduces most of the concepts the readers will need to take advantage of the material. An essential introduction to SDR, this book is sure to be an invaluable addition to any technical bookshelf.
