Download or read book Facial Palsy written by Chieh-Han John Tzou and published by Springer Nature. This book was released on 2021-05-27 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the surgical techniques available in reconstruction of the paralyzed face. It is divided into six parts. The first part introduces the topic of facial palsy, and the following parts provide detailed information on facial nerve reconstruction techniques, management of eye closure and smile reanimation. The book highlights symmetrization techniques and synkinesis and presents innovations and new frontiers in facial palsy.Written by an international group of experts who are committed to maintaining high standards and service in treating this condition and improving outcomes, it is a valuable source of information for clinicians and practitioners in plastic and reconstructive surgery, neurosurgeons and oral-and-maxillofacial surgeons, but also useful for researchers in this field.
Download or read book Digitization in Dentistry written by Priyanka Jain and published by Springer Nature. This book was released on 2021-03-22 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides evidence-based guidance on the clinical applications of digital dentistry, that is, the use of dental technologies or devices that incorporate digital or computer-controlled components for the performance of dental procedures. Readers will find practically oriented information on the digital procedures currently in use in various fields of dental practice, including, for example, diagnosis and treatment planning, oral radiography, endodontics, orthodontics, implant dentistry, and esthetic dentistry. The aim is to equip practitioners with the knowledge required in order to enhance their daily practice. To this end, a problem-solving approach is adopted, with emphasis on key concepts and presentation of details in a sequential and easy to follow manner. Clear recommendations are set out, and helpful tips and tricks are highlighted. The book is written in a very readable style and is richly illustrated. Whenever appropriate, information is presented in tabular form to provide a ready overview of answers to frequent doubts and questions.
Download or read book Maxillofacial Cone Beam Computed Tomography written by William C. Scarfe and published by Springer. This book was released on 2018-01-04 with total page 1241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive description of the fundamental operational principles, technical details of acquiring and specific clinical applications of dental and maxillofacial cone beam computed tomography (CBCT). It covers all clinical considerations necessary for optimal performance in a dental setting. In addition overall and region specific correlative imaging anatomy of the maxillofacial region is described in detail with emphasis on relevant disease. Finally imaging interpretation of CBCT images is presented related to specific clinical applications. This book is the definitive resource for all who refer, perform, interpret or use dental and maxillofacial CBCT including dental clinicians and specialists, radiographers, ENT physicians, head and neck, and oral and maxillofacial radiologists.
Download or read book Medical Modelling written by Richard Bibb and published by Woodhead Publishing. This book was released on 2014-12-13 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical modelling and the principles of medical imaging, Computer Aided Design (CAD) and Rapid Prototyping (also known as Additive Manufacturing and 3D Printing) are important techniques relating to various disciplines - from biomaterials engineering to surgery. Building on the success of the first edition, Medical Modelling: The application of Advanced Design and Rapid Prototyping techniques in medicine provides readers with a revised edition of the original text, along with key information on innovative imaging techniques, Rapid Prototyping technologies and case studies.Following an overview of medical imaging for Rapid Prototyping, the book goes on to discuss working with medical scan data and techniques for Rapid Prototyping. In this second edition there is an extensive section of peer-reviewed case studies, describing the practical applications of advanced design technologies in surgical, prosthetic, orthotic, dental and research applications. - Covers the steps towards rapid prototyping, from conception (modelling) to manufacture (manufacture) - Includes a comprehensive case studies section on the practical application of computer-aided design (CAD) and rapid prototyping (RP) - Provides an insight into medical imaging for rapid prototyping and working with medical scan data
Download or read book Issues in Contemporary Orthodontics written by Farid Bourzgui and published by BoD – Books on Demand. This book was released on 2015-09-03 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Contemporary Orthodontics is a contribution to the ongoing debate in orthodontics, a discipline of continuous evolution, drawing from new technology and collective experience, to better meet the needs of students, residents, and practitioners of orthodontics. The book provides a comprehensive view of the major issues in orthodontics that have featured in recent debates. Abroad variety of topics is covered, including the impact of malocclusion, risk management and treatment, and innovation in orthodontics.
Download or read book 3D Diagnosis and Treatment Planning in Orthodontics written by Jean-Marc Retrouvey and published by Springer Nature. This book was released on 2021-03-13 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This richly illustrated book is a wide-ranging guide to modern diagnostics and treatment planning in orthodontics, which are mandatory prior to the initiation of any type of comprehensive treatment. The importance of three-dimensional (3D) imaging techniques has been increasingly recognized owing to the shortcomings of conventional two-dimensional imaging in some patients, such as those requiring complex adult treatment and those with temporomandibular joint dysfunctions or sleep disturbances. In the first part of this book, readers will find clear description and illustration of the diagnostic role of the latest 3D imaging techniques, including cone beam computed tomography, intra-oral scanning, and magnetic resonance imaging. The second part explains in detail the application of 3D techniques in treatment planning for orthodontic and orthognathic surgery. Guidance is also provided on the use of image fusion software for the purposes of accurate diagnosis and precise design of the most appropriate biomechanical approach in patients with malocclusions.
Download or read book Maxillofacial Rehabilitation written by John Beumer (III) and published by Quintessence Publishing (IL). This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, which offers a truly multidisciplinary approach to cancer care and research, provides the reader with insights into the etiologies of cancer as well as the latest developments in reconstructive surgery, maxillofacial prosthetics, and dental care. In this updated edition, new chapters present information on digital technology and tissue engineering, reflecting the impact of computer-aided design and manufacturing and molecular biology on current and future treatment strategies. In addition, all chapters have undergone significant revision, reflecting the knowledge and sophistication gained over the last few years in the use of osseointegrated implants, free vascularized flaps, and dental management of the irradiated patient, among other topics. The reader will take away practical knowledge of state-of-the-art treatment approaches to ensure that future patients will no longer complain that "the cure was worse than the disease."
Download or read book Cleft Lip and Palate Treatment written by Nivaldo Alonso and published by Springer. This book was released on 2018-03-08 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to discuss cleft lip and palate deformities in a comprehensive way, presenting it from the basics to the most clinically and surgically relevant issues. First, the basic concepts of embryology and pathogenesis of the facial deformities will be discussed. Special attention will be paid to the genetics underlying this condition. Following that, basic principles of surgical treatment through the most recent advances in the field will be presented, along with most important evidences from the literature and the personal experience of the editors and authors. Cleft Lip and Palate Treatment presents the state of the art and advances in the field and is intended to serve as a comprehensive guide for a broad audience. All the specialties involved in the comprehensive care of these craniofacial deformities will be presented in this book.
Download or read book Intelligent Automation and Computer Engineering written by Oscar Castillo and published by Springer Science & Business Media. This book was released on 2010-07-17 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large international conference in Intelligent Automation and Computer Engineering was held in Hong Kong, March 18-20, 2009, under the auspices of the International MultiConference of Engineers and Computer Scientists (IMECS 2009). The IMECS is organized by the International Association of Engineers (IAENG). Intelligent Automation and Computer Engineering contains 37 revised and extended research articles written by prominent researchers participating in the conference. Topics covered include artificial intelligence, decision supporting systems, automated planning, automation systems, control engineering, systems identification, modelling and simulation, communication systems, signal processing, and industrial applications. Intelligent Automation and Computer Engineering offers the state of the art of tremendous advances in intelligent automation and computer engineering and also serves as an excellent reference text for researchers and graduate students, working on intelligent automation and computer engineering.
Download or read book Management of Facial Asymmetry written by Pushkar Mehra and published by Springer Nature. This book was released on with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oral Facial Genetics written by Gerald H. Prescott and published by . This book was released on 1976 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Craniofacial Anthropometry written by John C. Kolar and published by Charles C. Thomas Publisher. This book was released on 1997 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Orthodontics written by Thomas M. Graber and published by . This book was released on 1994 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition has been rewritten to reflect changes in the field. Concentrating on the most current concepts and best treatment methods in modern orthodontics, it provides an overview of diagnosis and treatment planning, followed by descriptions of orthodontic techniques.
Download or read book Anthropometric Facial Proportions in Medicine written by Leslie G. Farkas and published by Charles C. Thomas Publisher. This book was released on 1987 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rapid Maxillary Expansion written by Donald J. Timms and published by . This book was released on 1981 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Orthodontic Mini implant Clinical Handbook written by Richard Cousley and published by John Wiley & Sons. This book was released on 2020-01-29 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers the very latest on the theory and practice of integrating mini-implant techniques into clinical practice This all-new second edition of The Orthodontic Mini-implant Clinical Handbook provides a thoroughly revised and expanded update to the theoretical and practical aspects of using mini-implants in orthodontic practice. Taking a practical step-by-step approach with hundreds of clinical images, it presents updated clinical techniques and new clinical cases, covering all topics of importance for utilising mini-implants. It also includes a new chapter on mini-implant anchored maxillary expansion appliances. It begins with a chapter that looks at mini-implant principles and potential complications, before moving onto clinical and design factors for maximising mini-implant success. Other chapters cover incisor retraction; molar distalisation and protraction; intrusion and anterior openbite treatments; bone anchored rapid maxillary expansion; orthognathic surgical uses; and ectopic teeth. Provides a comprehensive guide to both theoretical and practical advice for the use of mini-implants in orthodontic practice Covers updated clinical techniques and new clinical cases Presents a new chapter on mini-implant anchored maxillary expansion appliances Takes a highly illustrated step-by-step approach ideal for clinical practice The Orthodontic Mini-Implant Clinical Handbook is an essential resource to orthodontists, maxillofacial surgeons, practicing dentists, and anyone with an interest in mini-implant skeletal anchorage.
Download or read book Craniofacial 3D Imaging written by Onur Kadioglu and published by Springer. This book was released on 2019-01-28 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to serve as an up-to-date reference on the use of cone-beam computed tomography for the purpose of 3D imaging of the craniofacial complex. The focus is in particular on the ways in which craniofacial 3D imaging changes how we think about conventional diagnosis and treatment planning and on its clinical applications within orthodontics and oral and maxillofacial surgery. Emphasis is placed on the value of 3D imaging in visualizing the limits of the alveolar bone, the airways, and the temporomandibular joints and the consequences for treatment planning and execution. The book will equip readers with the knowledge required in order to apply and interpret 3D imaging to the benefit of patients. All of the authors have been carefully selected on the basis of their expertise in the field. In describing current thinking on the merits of 3D craniofacial imaging, they draw both on the available scientific literature and on their own translational research findings.
