Download or read book A Primer on the Geometry of Carbon Nanotubes and Their Modifications written by Sadegh Imani Yengejeh and published by . This book was released on 2015-01-31 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Primer on the Geometry of Carbon Nanotubes and Their Modifications written by Sadegh Imani Yengejeh and published by Springer. This book was released on 2015-01-12 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a comprehensive system for categorizing carbon nanotubes and their modifications in terms of nano sheets, nanotubes, microscopic and atomic modifications. In addition, the material and geometric properties of these nano-configurations are addressed. Lastly, it introduces a number of common software packages for geometry generation and several commercial finite element programs.
Download or read book Shell Structures Theory and Applications Volume 4 written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2017-10-30 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology and everyday life. Examples of shell structures in technology include automobile bodies, water and oil tanks, pipelines, silos, wind turbine towers, and nanotubes. Nature is full of living shells such as leaves of trees, blooming flowers, seashells, cell membranes or wings of insects. In the human body arteries, the eye shell, the diaphragm, the skin and the pericardium are all shells as well. Shell Structures: Theory and Applications, Volume 4 contains 132 contributions presented at the 11th Conference on Shell Structures: Theory and Applications (Gdansk, Poland, 11-13 October 2017). The papers reflect a wide spectrum of scientific and engineering problems from theoretical modelling through strength, stability and dynamic behaviour, numerical analyses, biomechanic applications up to engineering design of shell structures. Shell Structures: Theory and Applications, Volume 4 will be of interest to academics, researchers, designers and engineers dealing with modelling and analyses of shell structures. It may also provide supplementary reading to graduate students in Civil, Mechanical, Naval and Aerospace Engineering.
Download or read book Elastic and Plastic Deformation of Carbon Nanotubes written by Hiroyuki Shima and published by CRC Press. This book was released on 2013-09-03 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes offer huge potential in so many fields due in part to their significant mechanical properties, including extraordinary rigidity, resilience, toughness, and flexibility. Mechanical deformation of carbon nanotubes is known to cause considerable changes in their physical and chemical properties through the nontrivial structure-propert
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Surface Modifications of Carbon Nanotubes and Their Application in Electro catalysis written by Shankhamala Kundu and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SURFACE MODIFIED CARBON NANOTUBES written by and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotubes for Polymer Reinforcement written by Peng-Cheng Ma and published by CRC Press. This book was released on 2011-03-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered in the twentieth century, carbon nanotubes (CNT) were an integral part of science and industry by the beginning of the twenty first century, revolutionizing chemistry, physics, and materials science. More recent advances in carbon nanotube production methods have resulted in a tremendous push to incorporate CNTs into polymer matrices. Al
Download or read book Carbon Nanotubes written by M. Meyyappan and published by CRC Press. This book was released on 2004-07-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, with their extraordinary mechanical and unique electronic properties, have garnered much attention in the past five years. With a broad range of potential applications including nanoelectronics, composites, chemical sensors, biosensors, microscopy, nanoelectromechanical systems, and many more, the scientific community is more moti
Download or read book Comprehensive Nanoscience and Nanotechnology written by and published by Academic Press. This book was released on 2019-01-02 with total page 1881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nanoscience and Technology, Second Edition, Five Volume Set allows researchers to navigate a very diverse, interdisciplinary and rapidly-changing field with up-to-date, comprehensive and authoritative coverage of every aspect of modern nanoscience and nanotechnology. Presents new chapters on the latest developments in the field Covers topics not discussed to this degree of detail in other works, such as biological devices and applications of nanotechnology Compiled and written by top international authorities in the field
Download or read book Computational Modelling of Nanomaterials written by Panagiotis Grammatikopoulos and published by Elsevier. This book was released on 2020-09-30 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their small size and their dependence on very fast phenomena, nanomaterials are ideal systems for computational modelling. This book provides an overview of various nanosystems classified by their dimensions: 0D (nanoparticles, QDs, etc.), 1D (nanowires, nanotubes), 2D (thin films, graphene, etc.), 3D (nanostructured bulk materials, devices). Fractal dimensions, such as nanoparticle agglomerates, percolating films and combinations of materials of different dimensionalities are also covered (e.g. epitaxial decoration of nanowires by nanoparticles, i.e. 0D+1D nanomaterials). For each class, the focus will be on growth, structure, and physical/chemical properties. The book presents a broad range of techniques, including density functional theory, molecular dynamics, non-equilibrium molecular dynamics, finite element modelling (FEM), numerical modelling and meso-scale modelling. The focus is on each method’s relevance and suitability for the study of materials and phenomena in the nanoscale. This book is an important resource for understanding the mechanisms behind basic properties of nanomaterials, and the major techniques for computational modelling of nanomaterials. Explores the major modelling techniques used for different classes of nanomaterial Assesses the best modelling technique to use for each different type of nanomaterials Discusses the challenges of using certain modelling techniques with specific nanomaterials
Download or read book Nanobiomaterials in Clinical Dentistry written by Karthikeyan Subramani and published by William Andrew. This book was released on 2012-12-31 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: New nanomaterials are leading to a range of emerging dental treatments that utilize more biomimetic materials that more closely duplicate natural tooth structure (or bone, in the case of implants). This book brings together an international team of experts from the fields of materials science, nanotechnology and dentistry, to explain these new materials and their applications for the restoration, fixation, replacement, or regeneration of hard and soft tissues in and about the oral cavity and craniofacial region. The main topics covered include applications in dental specialties (Orthodontics, Endodontics, Pediatric dentistry, Periodontics, Prosthodontics and Implant dentistry), salivary diagnostics using bioMEMS/NEMS systems, nanochips for oral cancer diagnosis, biomimetic nanomaterials, and nanotechnology for tooth repair and regeneration. The editors' previous book, Emerging Nanotechnologies in Dentistry focused on the fabrication/manufacturing processes of materials and dentistry applications. This second book complements the first covers with coverage of the range of nanomaterials available today in clinical dentistry, explaining the innovative techniques and applications in all of the main clinical dental specialties. Nanobiomaterial engineers, biomedical researchers, biomedical engineers and dental/oral pre-clinical and clinical researchers will find the comprehensive coverage essential for working with nanotechnologies and materials in both clinical and research settings. Book prepared by an interdisciplinary and international group of scientists and practitioners in the fields of nanomaterials, dental implants, medical devices and clinical practice Comprehensive professional reference for the subject covering materials fabrication and use of materials for all major diagnostic and therapeutic dental applications – repair, restoration, regeneration, implants and prevention Complements the editors' previous book on nanotechnology applications for dentistry
Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.
Download or read book Structural DNA Nanotechnology written by Nadrian C. Seeman and published by Cambridge University Press. This book was released on 2015 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the founder of the field, this is a comprehensive and accessible introduction to structural DNA nanotechnology.
Download or read book Handbook of Fingerprint Recognition written by Davide Maltoni and published by Springer Science & Business Media. This book was released on 2006-04-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major new professional reference work on fingerprint security systems and technology from leading international researchers in the field. Handbook provides authoritative and comprehensive coverage of all major topics, concepts, and methods for fingerprint security systems. This unique reference work is an absolutely essential resource for all biometric security professionals, researchers, and systems administrators.
Download or read book Condensed Matter Physics written by Michael P. Marder and published by Wiley-Interscience. This book was released on 2000-01-27 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems after each chapter
Download or read book Carbon Nanotube Reinforced Composites written by Marcio Loos and published by Elsevier. This book was released on 2014-09-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube Reinforced Composites introduces a wide audience of engineers, scientists and product designers to this important and rapidly expanding class of high performance composites. Dr Loos provides readers with the scientific fundamentals of carbon nanotubes (CNTs), CNT composites and nanotechnology in a way which will enable them to understand the performance, capability and potential of the materials under discussion. He also investigates how CNT reinforcement can be used to enhance the mechanical, electrical and thermal properties of polymer composites. Production methods, processing technologies and applications are fully examined, with reference to relevant patents. Finally, health and safety issues related to the use of CNTs are investigated. Dr. Loos compares the theoretical expectations of using CNTs to the results obtained in labs, and explains the reasons for the discrepancy between theoretical and experimental results. This approach makes the book an essential reference and practical guide for engineers and product developers working with reinforced polymers – as well as researchers and students in polymer science, materials and nanotechnology. A wealth of applications information is included, taken from the wide range of industry sectors utilizing CNT reinforced composites, such as energy, coatings, defense, electronics, medical devices, and high performance sports equipment. Introduces a wide range of readers involved in plastics engineering, product design and manufacturing to the relevant topics in nano-science, nanotechnology, nanotubes and composites. Assesses effects of CNTs as reinforcing agents, both in a materials context and an applications setting. Focuses on applications aspects – performance, cost, health and safety, etc – for a wide range of industry sectors, e.g. energy, coatings, defense, electronics, medical devices, high performance sports equipment, etc.
