Download or read book A Precut Column Design and Control Using ASPEN written by Nor Syazwani Sukri and published by . This book was released on 2008 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: A pre-cut column from the Palm Oil Fractionation Plant is one approach to the distillation of fatty acids. This research aim to develop dynamic Pre Cut Column model using ASPEN and incorporate control system into distillation column model. The scope of this study is to learn how to use dynamic simulators by simulating Pre Cut Column in steady-state condition and moving to a dynamic simulation, then applying PID (proportional-integral-derivative) control system as an effective control system for continuous processes. For designing the precut column, the method that must be concerned are specifying chemical components and physical properties, specifying stream properties and specifying equipment parameters before running the simulation. PID controllers are the controller of choice for controlling the precut column because PID system is a balancing act with all terms interacting. Integral feedback Element (I) is added to the proportional element to provide a means for eliminating a changing offset in a non linear system and to slow down the reaction to allow for the time delays in the system. Derivative feedback element (D) is added to provide a means of reducing sudden changes in the output and will provide a faster response to step functions and transients. The result was in steady state simulation of precut column and the parameters of controllers were identified from dynamic responses. Dynamic simulation has become increasingly important as processes become more complex and are designed and operated closer to constraints.-Author.
Download or read book Timber Bridges written by Michael A. Ritter and published by Datamotion Publishing LLC. This book was released on 1990 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a comprehensive analysis of the design, construction, inspection, and maintenance of timber bridges.
Download or read book The Case for Tall Wood Buildings written by Michael Green and published by Blurb. This book was released on 2017-02-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a new structural system in wood that represents the first significant challenge to concrete and steel structures since their inception in tall building design more than a century ago. The introduction of these ideas is driven by the need to find safe, carbon-neutral and sustainable alternatives to the incumbent structural materials of the urban world. The potential market for these ideas is quite simply enormous. The proposed solutions have the potential to revolutionize the building industry, address the major challenges of climate change, urbanization, and sustainable development and to significantly contribute to world housing needs.
Download or read book Canadian Wood frame House Construction written by John Burrows and published by Central Mortgage and Housing Corporation. This book was released on 2005 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy reference book walks you through the complete construction of a wood frame house, from excavation to the finishing touches. It is updated to the current edition of the National Building code. This is the most comprehensive, easy-to-use reference book for the construction of wood-frame houses. Canadian Wood-Frame House Construction features illustrations tables, plan ahead notes, healthy housing insights to minimize and protect occupants and environment.
Download or read book Handbook of Fruits and Fruit Processing written by Y. H. Hui and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing of fruits continues to undergo rapid change. In the Handbook of Fruits and Fruit Processing, Dr. Y.H. Hui and his editorial team have assembled over forty respected academicians and industry professionals to create an indispensable resource on the scientific principles and technological methods for processing fruits of all types. The book describes the processing of fruits from four perspectives: a scientific basis, manufacturing and engineering principles, production techniques, and processing of individual fruits. A scientific knowledge of the horticulture, biology, chemistry, and nutrition of fruits forms the foundation. A presentation of technological and engineering principles involved in processing fruits is a prelude to their commercial production. As examples, the manufacture of several categories of fruit products is discussed. The final part of the book discusses individual fruits, covering their harvest to a finished product in a retail market. As a professional reference book replete with the latest research or as a practical textbook filled with example after example of commodity applications, the Handbook of Fruits and Fruit Processing is the current, comprehensive, yet compact resource ideal for the fruit industry.
Download or read book Utilization of the Southern Pines Processing written by Peter Koch and published by . This book was released on 1972 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Systems for Interior Designers written by Corky Binggeli and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Systems for interior designers Second Edition Corky Binggeli, asid The updated guide to technical building systems for interior designers As integral members of the building design team, interior designers share an increasingly complex and crucial role. Now revised in its second edition, Building Systems for Interior Designers remains the one go-to resource that addresses the special concerns of the interior designer within the broader context of the rest of the building design team. Building Systems for Interior Designers, Second Edition explains technical building systems and engineering issues in a clear and accessible way to interior designers. Covering systems from HVAC to water and waste to lighting, transportation, and safety, author Corky Binggeli enables interior designers to communicate more effectively with architects, engineers, and contractors; collaborate effectively on projects; and contribute to more accurate solutions for a broad range of building considerations. Among the many improvements in the Second Edition are: A deeper engagement with sustainable building design, giving the interior designer the resources needed to participate as part of a sustainable design team A reshaped structure that enhances the reader's understanding of the material Many more illustrations and explanatory captions With a host of features to make the book more up to date, easier to use, and more effective as an instructive guide, Building Systems for Interior Designers, Second Edition is a valuable book for students as well as a practical desktop reference for professionals.
Download or read book Surgical Arithmetic written by Lawrence Rosenberg and published by CRC Press. This book was released on 2000-01-01 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for the practicing surgeon. It is designed to offer practical insights into the essentials of an epidemiological, statistical and outcomes-based approach to surgical practice. Surgeons are invited to begin to develop the requisite skills that will allow them to communicate effectively with their colleagues in epidemiology and
Download or read book Composition enrichment written by and published by . This book was released on 1996 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fruit Processing written by D. Arthey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fruit and fruit products, in all their many varieties and variations, are major world commodities and part of the economic life blood of many countries, particularly in the developing world. The perception of the healthy nature of fruit is a major reason for its increased consumption in the developed world, and many consumers today find a wider selection of fruit varieties, available at all times of the year, than ever before. This volume, however, is not so much concerned with fresh fruit as those principal areas of processing to which it may be subjected. Fruit processing arose as a means of utilising a short-lived product and preserving its essential nutritional qualities as far as possible. A chapter on the nutritional aspects of fruit is included in this work to reflect the importance of this topic to most consumers. After a general introduction, the chapter on fruit storage is the only contribution which deals with a process from which fruit emerges in essentially the same physical condition. Beyond that the book sets out to cover most of the major areas in which fruit may be processed into forms which bear varying semblances to the original raw material.
Download or read book Growing Gourmet and Medicinal Mushrooms written by Paul Stamets and published by Ten Speed Press. This book was released on 2011-07-13 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed and comprehensive guide for growing and using gourmet and medicinal mushrooms commercially or at home. “Absolutely the best book in the world on how to grow diverse and delicious mushrooms.”—David Arora, author of Mushrooms Demystified With precise growth parameters for thirty-one mushroom species, this bible of mushroom cultivation includes gardening tips, state-of-the-art production techniques, realistic advice for laboratory and growing room construction, tasty mushroom recipes, and an invaluable troubleshooting guide. More than 500 photographs, illustrations, and charts clearly identify each stage of cultivation, and a twenty-four-page color insert spotlights the intense beauty of various mushroom species. Whether you’re an ecologist, a chef, a forager, a pharmacologist, a commercial grower, or a home gardener—this indispensable handbook will get you started, help your garden succeed, and make your mycological landscapes the envy of the neighborhood.
Download or read book Tall Wood Buildings written by Michael Green and published by Birkhauser. This book was released on 2017-01-11 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tall Wood buildings' have been at the foreground of innovative building practice for a number of years. From London to Stockholm, from Vancouver to Melbourne timber buildings of up to 20 storeys have been built or designed. This publication explains the typical construction types and documents an international selection of 13 case studies with many specially prepared construction drawings, demonstrating the range of the technology.
Download or read book Methods to Study Litter Decomposition written by Manuel A.S. Graça and published by Springer Science & Business Media. This book was released on 2005-04-05 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this book is to provide students and laboratory instructors at universities and professional ecologists with a broad range of established methods to study plant litter decomposition. Detailed protocols for direct use in the field or laboratory are presented in an easy to follow step-by-step format. A short introduction to each protocol reviews the ecological significance and principles of the technique and points to key references.
Download or read book The Whole Building Handbook written by Maria Block and published by Routledge. This book was released on 2010-02-09 with total page 1938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Whole Building Handbook is a compendium of all the issues and strategies that architects need to understand to design and construct sustainable buildings for a sustainable society. The authors move beyond the current definition of sustainability in architecture, which tends to focus on energy-efficiency, to include guidance for architecture that promotes social cohesion, personal health, renewable energy sources, water and waste recycling systems, permaculture, energy conservation - and crucially, buildings in relation to their place. The authors offer a holistic approach to sustainable architecture and authoritative technical advice, on: * How to design and construct healthy buildings, through choosing suitable materials, healthy service systems, and designing a healthy and comfortable indoor climate, including solutions for avoiding problems with moisture, radon and noise as well as how to facilitate cleaning and maintenance. * How to design and construct buildings that use resources efficiently, where heating and cooling needs and electricity use is minimized and water-saving technologies and garbage recycling technologies are used. * How to 'close' organic waste, sewage, heat and energy cycles. For example, how to design a sewage system that recycles nutrients. * Includes a section on adaptation of buildings to local conditions, looking at how a site must be studied with respect to nature, climate and community structure as well as human activities. The result is a comprehensive, thoroughly illustrated and carefully structured textbook and reference.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
Download or read book Minimum Design Loads for Buildings and Other Structures written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2000 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Poultry Meat Processing and Quality written by G Mead and published by Elsevier. This book was released on 2004-06-01 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poultry products are universally popular and in recent years the consumption of poultry meat has risen dramatically. To ensure the continued growth and competitiveness of this industry, it is essential that poultry meat quality and safety are maintained during production and processing. This important collection provides an authoritative review of the key issues affecting poultry meat quality in production and processing. The book begins by establishing consumer requirements for meat quality, before examining the influence of breeding and husbandry, and techniques for stunning and slaughter of poultry. Chapters 5 and 6 look at primary and secondary processing and Chapters 7, 8 and 9 discuss packaging, refrigeration and other preservation techniques. There are also chapters on microbial hazards and chemical residues in poultry. Quality management issues are reviewed in the final group of chapters, including shelf-life and spoilage, measuring quality parameters and ways of maintaining safety and maximising quality. Poultry meat processing and quality is an essential reference book for technical managers in the Poultry Industry and anyone engaged in teaching or research on poultry meat production. An essential reference for the entire poultry meat industry Reviews the key issues affecting poultry meat quality in production and processing Extensive analysis of poultry meat safety issues
