Download or read book A Performance Model and Load Balancer for a Parallel Monte Carlo Cellular Microphysiology Simulator written by Urvashi Rao Venkata and published by . This book was released on 2004 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomembranes written by Robert B. Gennis and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: New textbooks at all levels of chemistry appear with great regularity. Some fields like basic biochemistry, organic reaction mechanisms, and chemical thermody namics are well represented by many excellent texts, and new or revised editions are published sufficiently often to keep up with progress in research. However, some areas of chemistry, especially many of those taught at the graduate level, suffer from a real lack of up-to-date textbooks. The most serious needs occur in fields that are rapidly changing. Textbooks in these subjects usually have to be written by scientists actually involved in the research which is advancing the field. It is not often easy to persuade such individuals to set time aside to help spread the knowledge they have accumulated. Our goal, in this series, is to pinpoint areas of chemistry where recent progress has outpaced what is covered in any available textbooks, and then seek out and persuade experts in these fields to produce relatively concise but instructive introductions to their fields. These should serve the needs of one semester or one quarter graduate courses in chemistry and biochemistry. In some cases, the availability of texts in active research areas should help stimulate the creation of new courses.
Download or read book Small Animal Imaging written by Fabian Kiessling and published by Springer. This book was released on 2017-05-22 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is a practical guide to the use of small animal imaging in preclinical research that will assist in the choice of imaging modality and contrast agent and in study design, experimental setup, and data evaluation. All established imaging modalities are discussed in detail, with the assistance of numerous informative illustrations. While the focus of the new edition remains on practical basics, it has been updated to encompass a variety of emerging imaging modalities, methods, and applications. Additional useful hints are also supplied on the installation of a small animal unit, study planning, animal handling, and cost-effective performance of small animal imaging. Cross-calibration methods and data postprocessing are considered in depth. This new edition of Small Animal Imaging will be an invaluable aid for researchers, students, and technicians involved in research into and applications of small animal imaging.
Download or read book Algorithms for Continuous Optimization written by Emilio Goiuseppe Spedicato and published by Springer Science & Business Media. This book was released on 1994-05-31 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Study Institute on "Algorithms for continuous optimiza tion: the state of the art" was held September 5-18, 1993, at II Ciocco, Barga, Italy. It was attended by 75 students (among them many well known specialists in optimiza tion) from the following countries: Belgium, Brasil, Canada, China, Czech Republic, France, Germany, Greece, Hungary, Italy, Poland, Portugal, Rumania, Spain, Turkey, UK, USA, Venezuela. The lectures were given by 17 well known specialists in the field, from Brasil, China, Germany, Italy, Portugal, Russia, Sweden, UK, USA. Solving continuous optimization problems is a fundamental task in computational mathematics for applications in areas of engineering, economics, chemistry, biology and so on. Most real problems are nonlinear and can be of quite large size. Devel oping efficient algorithms for continuous optimization has been an important field of research in the last 30 years, with much additional impetus provided in the last decade by the availability of very fast and parallel computers. Techniques, like the simplex method, that were already considered fully developed thirty years ago have been thoroughly revised and enormously improved. The aim of this ASI was to present the state of the art in this field. While not all important aspects could be covered in the fifty hours of lectures (for instance multiob jective optimization had to be skipped), we believe that most important topics were presented, many of them by scientists who greatly contributed to their development.
Download or read book Principles of Safety Pharmacology written by Michael K. Pugsley and published by Springer. This book was released on 2015-06-19 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates, in a comprehensive manner, the most current areas of importance to Safety Pharmacology, a burgeoning unique pharmacological discipline with important ties to academia, industry and regulatory authorities. It provides readers with a definitive collection of topics containing essential information on the latest industry guidelines and overviews current and breakthrough topics in both functional and molecular pharmacology. An additional novelty of the book is that it constitutes academic, pharmaceutical and biotechnology perspectives for Safety Pharmacology issues. Each chapter is written by an expert in the area and includes not only a fundamental background regarding the topic but also detailed descriptions of currently accepted, validated models and methods as well as innovative methodologies used in drug discovery.
Download or read book 3D Bioprinting written by Jeremy M. Crook and published by Humana. This book was released on 2020-03-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores the latest developments and contributions to the field of 3D bioprinting, and discusses its use for quality R&D and translation. The chapters in this book are divided into two parts: Part one covers generic themes in bioprinting to introduce novice readers to the field, while also providing experts with new and helpful information. Part two discusses protocols used to prepare, characterize, and print a variety of biomaterials, cells, and tissues. These chapters also emphasize methods used for printing defined and humanized constructs suitable for human tissue modelling in research and applicable to clinical product development. Written in the highly successful Methods in Molecular Biology series format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols, and tips on troubleshooting and avoiding known pitfalls. Cutting-edge and comprehensive, 3D Bioprinting: Methods and Protocols is a valuable resource for researchers and bioprinting laboratories/facilities interested in learning more about this rapidly evolving technology.
Download or read book Normal Mode Analysis written by Qiang Cui and published by CRC Press. This book was released on 2005-12-12 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid developments in experimental techniques continue to push back the limits in the resolution, size, and complexity of the chemical and biological systems that can be investigated. This challenges the theoretical community to develop innovative methods for better interpreting experimental results. Normal Mode Analysis (NMA) is one such technique
Download or read book Introduction to Continuum Biomechanics written by Kyriacos Athanasiou and published by Morgan & Claypool Publishers. This book was released on 2008-10-08 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the study of continuum mechanics applied to biological systems, i.e., continuum biomechanics. This vast and exciting subject allows description of when a bone may fracture due to excessive loading, how blood behaves as both a solid and fluid, down to how cells respond to mechanical forces that lead to changes in their behavior, a process known as mechanotransduction. We have written for senior undergraduate students and first year graduate students in mechanical or biomedical engineering, but individuals working at biotechnology companies that deal in biomaterials or biomechanics should also find the information presented relevant and easily accessible. Table of Contents: Tensor Calculus / Kinematics of a Continuum / Stress / Elasticity / Fluids / Blood and Circulation / Viscoelasticity / Poroelasticity and Thermoelasticity / Biphasic Theory
Download or read book The Mouse Nervous System written by Charles Watson and published by Academic Press. This book was released on 2011-11-28 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mouse Nervous System provides a comprehensive account of the central nervous system of the mouse. The book is aimed at molecular biologists who need a book that introduces them to the anatomy of the mouse brain and spinal cord, but also takes them into the relevant details of development and organization of the area they have chosen to study. The Mouse Nervous System offers a wealth of new information for experienced anatomists who work on mice. The book serves as a valuable resource for researchers and graduate students in neuroscience. Systematic consideration of the anatomy and connections of all regions of the brain and spinal cord by the authors of the most cited rodent brain atlases A major section (12 chapters) on functional systems related to motor control, sensation, and behavioral and emotional states A detailed analysis of gene expression during development of the forebrain by Luis Puelles, the leading researcher in this area Full coverage of the role of gene expression during development and the new field of genetic neuroanatomy using site-specific recombinases Examples of the use of mouse models in the study of neurological illness
Download or read book OPLL written by Atsushi Okawa and published by Springer Nature. This book was released on 2020-05-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication brings together information on all aspects of OPLL - epidemiology, etiology, diagnosis, and treatment. It contains contributions by Japanese researchers and surgeons, including members of the Ministry of Health and Welfare Investigation Committee, and by American surgeons with expertise in the field. Until now, little has been published on the subject in English. This collection of reports is amply augmented with illustrations.
Download or read book The Surfaceome written by Kenneth R. Boheler and published by Humana Press. This book was released on 2017-12-20 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides readers with the latest techniques and tools to assess modifications and functions of the surfaceome. The chapters in this book are divided into 4 sections: discovery-based approaches to surfaceome content; targeted approaches for surfaceome content; cell-based function analyses related to surfaceome content; and computational approaches in surfaceome studies. Section 1 focuses on discovery-based approaches for cataloging surfaceome content that analyses the surfaceome of bacteria, avian embryos, and mammalian systems. Section 2 discusses methods that over-express specific targets in Sf9 cells and generate bi-specific antibodies for targeting cancer and somatic cells. Section 3 explores voltage dependent sodium channels and high-content electrophysiological analyses. The final section looks at the new web-based platform known as targets-search. Written in the highly successful Methods in Molecular Biology series format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols, and tips on troubleshooting and avoiding known pitfalls. Comprehensive and thorough, Surfaceome: Methods and Protocols assists in the study of cell surface protein biology and function. It is a valuable resource for all researchers interested in this field.
Download or read book 3D Printing and Biofabrication written by Aleksandr Ovsianikov and published by Springer. This book was released on 2018-06-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an in-depth introduction to 3D printing and biofabrication and covers the recent advances in additive manufacturing for tissue engineering. The book is divided into two parts, the first part on 3D printing discusses conventional approaches in additive manufacturing aimed at fabrication of structures, which are seeded with cells in a subsequent step. The second part on biofabrication presents processes which integrate living cells into the fabrication process.
