Download or read book A Novel Focal mechanism Joint Inversion Method for Microseismic Data written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Inversion Methods A Practical Approach written by S. P. Maurya and published by Springer Nature. This book was released on 2020-05-28 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to seismic inversion methods and their application to both synthetic and real seismic data sets. Seismic inversion methods are routinely used to estimate attributes like P-impedance, S-impedance, density, the ratio of P-wave and S-wave velocities and elastic impedances from seismic and well log data. These attributes help to understand lithology and fluid contents in the subsurface. There are several seismic inversion methods available, but their application and results differ considerably, which can lead to confusion. This book explains all popular inversion methods, discusses their mathematical backgrounds, and demonstrates their capacity to extract information from seismic reflection data. The types covered include model-based inversion, colored inversion, sparse spike inversion, band-limited inversion, simultaneous inversion, elastic impedance inversion and geostatistical inversion, which includes single-attribute analysis, multi-attribute analysis, probabilistic neural networks and multi-layer feed-forward neural networks. In addition, the book describes local and global optimization methods and their application to seismic reflection data. Given its multidisciplinary, integrated and practical approach, the book offers a valuable tool for students and young professionals, especially those affiliated with oil companies.
Download or read book Introduction to Seismic Inversion Methods written by Brian H. Russell and published by SEG Books. This book was released on 1988 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the current techniques used in the inversion of seismic data is provided. Inversion is defined as mapping the physical structure and properties of the subsurface of the earth using measurements made on the surface, creating a model of the earth using seismic data as input.
Download or read book Seismic Amplitude Inversion in Reflection Tomography written by Yanghua Wang and published by Elsevier. This book was released on 2003-02-25 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book of its kind on seismic amplitude inversion in the context of reflection tomography. The aim of the monograph is to advocate the use of ray-amplitude data, separately or jointly with traveltime data, in reflection seismic tomography.The emphasis of seismic exploration is on imaging techniques, so that seismic section can be interpreted directly as a geological section. In contrast it is perhaps ironic that, in decades of industrial seismology, one major aspect of waveform data that potentially is easier to measure and analyse has generally been ignored. That is, the information content of seismic amplitudes. Perhaps the potential complexity has deterred most researchers from a more thorough investigation of the practical use of seismic amplitude data. The author of this volume presents an authoritative and detailed study of amplitude data, as used in conjunction with traveltime data, to provide better constraints on the variation of seismic wave speed in the subsurface.One of the fundamental problems in conventional reflection seismic tomography using only traveltime data is the possible ambiguity between the velocity variation and the reflector depth. The inclusion of amplitude data in the inversion may help to resolve this problem because the amplitudes and traveltimes are sensitive to different features of the subsurface model, and thereby provide more accurate information about the subsurface structure and the velocity distribution. An essential goal of this monograph is to make the amplitude inversion method work with real reflection seismic data.
Download or read book Seismic Inversion written by Yanghua Wang and published by John Wiley & Sons. This book was released on 2016-10-31 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic inversion aims to reconstruct a quantitative model of the Earth subsurface, by solving an inverse problem based on seismic measurements. There are at least three fundamental issues to be solved simultaneously: non-linearity, non-uniqueness, and instability. This book covers the basic theory and techniques used in seismic inversion, corresponding to these three issues, emphasising the physical interpretation of theoretical concepts and practical solutions. This book is written for master and doctoral students who need to understand the mathematical tools and the engineering aspects of the inverse problem needed to obtain geophysically meaningful solutions. Building on the basic theory of linear inverse problems, the methodologies of seismic inversion are explained in detail, including ray-impedance inversion and waveform tomography etc. The application methodologies are categorised into convolutional and wave-equation based groups. This systematic presentation simplifies the subject and enables an in-depth understanding of seismic inversion. This book also provides a practical guide to reservoir geophysicists who are attempting quantitative reservoir characterisation based on seismic data. Philosophically, the seismic inverse problem allows for a range of possible solutions, but the techniques described herein enable geophysicists to exclude models that cannot satisfy the available data. This book summarises the author’s extensive experience in both industry and academia and includes innovative techniques not previously published.
Download or read book Advanced Methods of Joint Inversion and Fusion of Multiphysics Data written by Michael Zhdanov and published by Springer. This book was released on 2023-12-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Different physical or geophysical methods provide information about distinctive physical properties of the objects, e.g., rock formations and mineralization. In many cases, this information is mutually complementary, which makes it natural for consideration in a joint inversion of the multiphysics data. Inversion of the observed data for a particular experiment is subject to considerable uncertainty and ambiguity. One productive approach to reducing uncertainty is to invert several types of data jointly. Nonuniqueness can also be reduced by incorporating additional information derived from available a priori knowledge about the target to reduce the search space for the solution. This additional information can be incorporated in the form of a joint inversion of multiphysics data. Generally established joint inversion methods, however, are inadequate for incorporating typical physical or geological complexity. For example, analytic, empirical, or statistical correlations between different physical properties may exist for only part of the model, and their specific form may be unknown. Features or structures that are present in the data of one physical method may not be present in the data generated by another physical method or may not be equally resolvable. This book presents and illustrates several advanced, new approaches to joint inversion and data fusion, which do not require a priori knowledge of specific empirical or statistical relationships between the different model parameters or their attributes. These approaches include the following novel methods, among others: 1) the Gramian method, which enforces the correlation between different parameters; 2) joint total variation functional or joint focusing stabilizers, e.g., minimum support and minimum gradient support constraints; 3) data fusion employing a joint minimum entropy stabilizer, which yields the simplest multiphysics solution that fits the multi-modal data. In addition, the book describes the principles of using artificial intelligence (AI) in solving multiphysics inverse problems. The book also presents in detail both the mathematical principles of these advanced approaches to joint inversion of multiphysics data and successful case histories of regional-scale and deposit-scale geophysical studies to illustrate their indicated advantages.
Download or read book Comparison of Seismic Inversion Methods on a Single Real Data Set written by Robert G. Keys and published by SEG Books. This book was released on 1998 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Seismic Inversion Methods written by Brian H. Russell and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Moment Tensor Solutions written by Sebastiano D'Amico and published by Springer. This book was released on 2018-05-12 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book first focuses on the explanation of the theory about focal mechanisms and moment tensor solutions and their role in the modern seismology. The second part of the book compiles several state-of-the-art case studies in different seismotectonic settings of the planet.The assessment of seismic hazard and the reduction of losses due to future earthquakes is probably the most important contribution of seismology to society. In this regard, the understanding of reliable determination seismic source and of its uncertainty can play a key role in contributing to geodynamic investigation, seismic hazard assessment and earthquake studies. In the last two decades, the use of waveforms recorded at local-to-regional distances has increased considerably. Waveform modeling has been used also to estimate faulting parameters of small-to-moderate sized earthquakes.
Download or read book Sustainable Geoscience for Natural Gas SubSurface Systems written by David Wood and published by Gulf Professional Publishing. This book was released on 2021-10-30 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Geoscience for Natural Gas SubSurface Systems delivers many of the scientific fundamentals needed in the natural gas industry, including coal-seam gas reservoir characterization and fracture analysis modeling for shale and tight gas reservoirs. Advanced research includes machine learning applications for well log and facies analysis, 3D gas property geological modeling, and X-ray CT scanning to reduce environmental hazards. Supported by corporate and academic contributors, along with two well-distinguished editors, the book gives today's natural gas engineers both fundamentals and advances in a convenient resource, with a zero-carbon future in mind. - Includes structured case studies to illustrate how new principles can be applied in practical situations - Helps readers understand advanced topics, including machine learning applications to optimize predictions, controls and improve knowledge-based applications - Provides tactics to accelerate emission reductions - Teaches gas fracturing mechanics aimed at reducing environmental impacts, along with enhanced oil recovery technologies that capture carbon dioxide
Download or read book Source Mechanism Analysis of Single well Microseismic Data Using Full wavefield Moment Tensor Inversion written by Trudy Watkins and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petrophysical simultaneous joint inversion of electromagnetic and seismic full waveform data written by Jérémie Giraud and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Stress and Its Measurement written by B. Amadei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock masses are initially stressed in their current in situ state of stress and to a lesser natural state. Whether one is interested in the extent on the monitoring of stress change. formation of geological structures (folds, faults, The subject of paleostresses is only briefly intrusions, etc. ), the stability of artificial struc discussed. tures (tunnels, caverns, mines, surface excava The last 30 years have seen a major advance our knowledge and understanding of rock tions, etc. ), or the stability of boreholes, a in the in situ or virgin stress field, stress. A large body of data is now available on knowledge of along with other rock mass properties, is the state of stress in the near surface of the needed in order to predict the response of rock Earth's crust (upper 3-4km of the crust). masses to the disturbance associated with those Various theories have been proposed regarding structures. Stress in rock is usually described the origin of in situ stresses and how gravity, within the context of continuum mechanics. It is tectonics, erosion, lateral straining, rock fabric, defined at a point and is represented by a glaciation and deglaciation, topography, curva second-order Cartesian tensor with six compo ture of the Earth and other active geological nents. Because of its definition, rock stress is an features and processes contribute to the current enigmatic and fictitious quantity creating chal in situ stress field.
Download or read book Seismic Modeling Inversion and Imaging in Attenuating Media written by Tieyuan Zhu and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurate seismic exploration demands sophisticated seismic techniques that can be applied to any complex geological setting, for example, attenuative and anisotropic media. This dissertation addresses attenuation problems in seismic exploration: how to model wave propagation in attenuating media, how to invert attenuation property of subsurface reliably, and how to mitigate attenuation effects in seismic images. The key innovations are (1) developing a novel viscoacoustic/elastic constant-Q wave equation that is practically efficient and accurately simulates the constant-Q attenuation behavior, (2) an iterative joint inversion framework for different geophysical datasets (e.g., attenuation data) to reduce the uncertainties of independent inversion results, (3) developing an Q-compensated reverse-time migration approach to compensate for attenuation effects (dispersion and amplitude loss) in seismic images. In the first part, I derive a novel viscoacoustic wave equation based on constant-Q theory. I investigate the accuracy of this wave equation. I show its application in a heterogeneous medium. Testing shows this model to be more computationally efficient than the most efficient single standard linear solid modeling. More importantly, this viscoacoustic equation separates attenuation and dispersion operators that allow us to mitigate both amplitude attenuation and phase dispersion effects in seismic imaging. This equation is the key modeling engine for seismic migration. Due to the data quality of the seismic waveform and the strong nonlinearity of the attenuation problem, I choose a joint inversion algorithm to invert for the attenuation coefficient. I develop an iterative joint inversion approach where one model domain acts as a constraint for inversion of the other, and the roles of the two domains are iteratively switched. This joint inversion stabilizes the inversion and ensures that results are geologically plausible. I apply the method to estimate Vp and the attenuation coefficient in field data examples. In the third part, I present a method to improve the image resolution by mitigating attenuation effects. I discuss the feasibility of time-reverse modeling in attenuating media using numerical experiments for 1D and 2D situations. I develop a Q-compensated reverse-time migration imaging approach (referred as Q-RTM). I illustrate this approach using different synthetic models. Numerical results further verify that this Q-RTM approach can effectively improve the resolution and quality of image, particularly beneath high-attenuation zones. To demonstrate the suitability, I apply the Q-RTM method to field data from the King Mountain site in west Texas. In the future, this method could readily be applied to other field datasets to improve the image resolution in high attenuation areas.
Download or read book Fundamentals of Gas Shale Reservoirs written by Reza Rezaee and published by John Wiley & Sons. This book was released on 2015-07-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive information about the key exploration, development and optimization concepts required for gas shale reservoirs Includes statistics about gas shale resources and countries that have shale gas potential Addresses the challenges that oil and gas industries may confront for gas shale reservoir exploration and development Introduces petrophysical analysis, rock physics, geomechanics and passive seismic methods for gas shale plays Details shale gas environmental issues and challenges, economic consideration for gas shale reservoirs Includes case studies of major producing gas shale formations
Download or read book Source Mechanisms of Earthquakes written by Agustín Udías Vallina and published by Cambridge University Press. This book was released on 2014-04-24 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: An innovative new approach to studying earthquake source mechanisms, combining theory and observation, for graduate students, researchers and seismology professionals.
Download or read book Seismic Hazard and Risk Assessment written by Radu Vacareanu and published by Springer. This book was released on 2018-03-21 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the best contributions presented during the 6th National Conference on Earthquake Engineering and the 2nd National Conference on Earthquake Engineering and Seismology - 6CNIS & 2CNISS, that took place on June 14-17, 2017 in Bucharest - Romania, at the Romanian Academy and Technical University of Civil Engineering of Bucharest. The book offers an updated overview of seismic hazard and risk assessment activities, with an emphasis on recent developments in Romania, a very challenging case study because of its peculiar intermediate-depth seismicity and evolutive code-compliant building stock. Moreover, the book collects input of renowned scientists and professionals from Germany, Greece, Italy, Japan, Netherlands, Portugal, Romania, Spain, Turkey and United Kingdom.The content of the book focuses on seismicity of Romania, geotechnical earthquake engineering, structural analysis and seismic design regulations, innovative solutions for seismic protection of building structures, seismic risk evaluation, resilience-based assessment of structures and management of emergency situations. The sub-chapters consist of the best papers of 6CNIS & 2CNISS selected by the International Advisory and Scientific Committees. The book is targeted at researchers and experts in seismic hazard and risk, evaluation and rehabilitation of buildings and structures, insurers and re-insurers, and decision makers in the field of emergency situations and recovery activities.
