Download or read book A New Algorithm for Sculptured Surface Machining written by Sanjeev Gupta and published by . This book was released on 1996 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sculptured Surface Machining written by Byoung K. Choi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential book documents the latest research progress and key issues affecting SSM software development. With a particular focus on the CAD/CAM environment, it provides a rich source of reference and covers a wide range of topics.

Download or read book Machining of Complex Sculptured Surfaces written by Joao Paulo Davim and published by Springer Science & Business Media. This book was released on 2012-01-05 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The machining of complex sculptured surfaces is a global technological topic, in modern manufacturing with relevance in both industrialized and emerging in countries, particularly within the moulds and dies sector whose applications include highly technological industries such as the automotive and aircraft industry. Machining of Complex Sculptured Surfaces considers new approaches to the manufacture of moulds and dies within these industries. The traditional technology employed in the manufacture of moulds and dies combined conventional milling and electro-discharge machining (EDM) but this has been replaced with high-speed milling (HSM) which has been applied in roughing, semi-finishing and finishing of moulds and dies with great success. Machining of Complex Sculptured Surfaces provides recent information on machining of complex sculptured surfaces including modern CAM systems and process planning for three and five axis machining as well as explanations of the advantages of HSM over traditional methods ranging from work piece precision and roughness to manual polishing following machining operations. Whilst primarily intended for engineering students and post graduates (particularly in the fields of mechanical, manufacturing or materials), Machining of Complex Sculptured Surfaces provides clear instructions on modern manufacturing; serving as a practical resource for all academics, researchers, engineers and industry professionals with interest in the machining of complex sculptured surfaces.

Download or read book Machining of Complex Sculptured Surfaces written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The machining of complex sculptured surfaces is a global technological topic, in modern manufacturing with relevance in both industrialized and emerging in countries, particularly within the moulds and dies sector whose applications include highly technological industries such as the automotive and aircraft industry. Machining of Complex Sculptured Surfaces considers new approaches to the manufacture of moulds and dies within these industries. The traditional technology employed in the manufacture of moulds and dies combined conventional milling and electro-discharge machining (EDM) but this has been replaced with high-speed milling (HSM) which has been applied in roughing, semi-finishing and finishing of moulds and dies with great success. Machining of Complex Sculptured Surfaces provides recent information on machining of complex sculptured surfaces including modern CAM systems and process planning for three and five axis machining as well as explanations of the advantages of HSM over traditional methods ranging from work piece precision and roughness to manual polishing following machining operations. Whilst primarily intended for engineering students and post graduates (particularly in the fields of mechanical, manufacturing or materials), Machining of Complex Sculptured Surfaces provides clear instructions on modern manufacturing; serving as a practical resource for all academics, researchers, engineers and industry professionals with interest in the machining of complex sculptured surfaces.

Download or read book Advanced Numerical Methods to Optimize Cutting Operations of Five Axis Milling Machines written by Stanislav S. Makhanov and published by Springer Science & Business Media. This book was released on 2007-04-18 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new optimization algorithms designed to improve the efficiency of tool paths for five-axis NC machining of sculptured surfaces. The book covers both the structure of the SLAM problem in general and proposes a new extremely efficient approach. It can be used by undergraduate and graduate students and researchers in the field of NC machining and CAD/CAM as well as by corporate research groups for advanced optimization of cutting operations.

Download or read book Adaptive Tool Path Generation and Simulation Algorithm for Freeform sculptured Surfaces written by Ameet R. Kamat and published by . This book was released on 2003 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Algorithms for Free Form Surface Machining and Their Application to Dental Restoration written by Jeong Ho Ahn and published by . This book was released on 1990 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Machining Impossible Shapes written by Gustav J. Olling and published by Springer. This book was released on 2013-03-20 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: On November 9-11, 1998,85 participants, representing 17 countries, gathered in Aubum Hills, Michigan, at the Chrysler Tech Center, to attend a workshop "SSM'98" (or Sculptured Surface Machining '98) organized by IFIP Working Group 5.3. This was the first major workshop on sculptured surface machining since the CAM-I sponsored conference "Machining Impossible Surfaces" held in 1981. The purpose of the SSM'98 workshop, entitled "Machining Impossible Shapes", was to promote a cross-fertilization of ideas among three communities: industrial users, CAM software developers and academic researchers. There were 17 participants who were "industrial users", 15 represented CAM software developers, 4 were from the machine tool industry, with the remainder being academic researchers. The format of the meeting included 40 presentations in 9 sessions, 4 keynote speeches and a sufficient amount of time for informal discussion amongst the participants. One of the most valuable aspects of the workshop was the opportunity for participants to meet informally and to discuss their mutual interests. This led to two "participant organized" sessions on five axis machining and on machine tool controllers.

Download or read book International Conference on Manufacturing Automation written by X. Y. Shao and published by John Wiley & Sons. This book was released on 2004-12-27 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the fourth ICMA in 2004 represent a huge contribution to research in this area. Everyone attending the conference was asked to submit their papers electronically which meant that 100 top quality papers from no less that 10 different countries contributed to the theme of the conference.

Download or read book Optimization of Three axis Vertical Milling of Sculptured Surfaces written by Gerardo Salas Bolanos and published by . This book was released on 2010 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: A tool path generation method for sculptured surfaces defined by triangular meshes is presented in this thesis along with an algorithm that helps determine the best type of cutter geometry to machine a specific surface. Existing tool path planning methods for sculptured surfaces defined by triangular meshes require extensive computer processing power and result in long processing times mainly since surface topology for triangular meshes is not provided. The method presented in this thesis avoids this problem by offsetting each triangular facet individually. The combination of all the individual offsets make up a cutter location surface. A single triangle offsetting results in many more triangles; many of these are redundant, increasing the time required for data handling in subsequent steps. To avoid the large number of triangles, the proposed method creates a bounding space to which the offset surface is limited. The original surface mesh describes the bounding surface of a solid, thus it is continuous with no gaps. Therefore, the resulting bounding spaces are also continuous and without gaps. Applying the boundary space limits the size of the offset surface resulting in a reduction in the number of triangular surfaces generated. The offset surface generation may result in unwanted intersecting triangles. The tool path planning strategy addresses this issue by applying hidden-surface removal algorithms. The cutter locations from the offset surface are obtained using the depth buffer. The simulation and machining results show that the tool paths generated by this process are correct. Furthermore, the time required to generate tool paths is less than the time required by other methods. The second part of this thesis presents a method for selecting an optimal cutter type. Extensive research has been carried out to determine the best cutter size for a given machining operation. However, cutter type selection has not been studied in-depth. This work presents a method for selecting the best cutter type based on the amount of material removed. By comparing the amount of material removed by two cutters at a given cutter location the best cutter can be selected. The results show that the optimal cutter is highly dependent on the surface geometry. For most complex surfaces it was found that a combination of cutters provides the best results.

Download or read book Automatic Tool path Generation for Machining Sculptured Surfaces Using Optimizations Based on Thin layer Cutting and High speed Machining Concepts written by Dennis Tang and published by . This book was released on 1994 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Constraint Handling in Metaheuristics and Applications written by Anand J. Kulkarni and published by Springer Nature. This book was released on 2021-04-12 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to discuss the core and underlying principles and analysis of the different constraint handling approaches. The main emphasis of the book is on providing an enriched literature on mathematical modelling of the test as well as real-world problems with constraints, and further development of generalized constraint handling techniques. These techniques may be incorporated in suitable metaheuristics providing a solid optimized solution to the problems and applications being addressed. The book comprises original contributions with an aim to develop and discuss generalized constraint handling approaches/techniques for the metaheuristics and/or the applications being addressed. A variety of novel as well as modified and hybridized techniques have been discussed in the book. The conceptual as well as the mathematical level in all the chapters is well within the grasp of the scientists as well as the undergraduate and graduate students from the engineering and computer science streams. The reader is encouraged to have basic knowledge of probability and mathematical analysis and optimization. The book also provides critical review of the contemporary constraint handling approaches. The contributions of the book may further help to explore new avenues leading towards multidisciplinary research discussions. This book is a complete reference for engineers, scientists, and students studying/working in the optimization, artificial intelligence (AI), or computational intelligence arena.

Download or read book Robotics Automation and Control in Industrial and Service Settings written by Luo, Zongwei and published by IGI Global. This book was released on 2015-09-10 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: ###############################################################################################################################################################################################################################################################

Download or read book Digital Manufacturing and Assembly Systems in Industry 4 0 written by Kaushik Kumar and published by CRC Press. This book was released on 2019-07-03 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, like other industries, is rising to the challenges imposed by aggressive consumer demands and the need for cost-effective processing that delivers quality in the fastest possible time. Fierce competition means that keeping abreast of new developments and applications in technology is essential if companies are to meet demands profitably and keep ahead of competitors. This book investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products using the I40 (industry 4.0)-enabling technologies. This book will also provide case studies covering modeling, simulation, and optimization. eBook includes color figures. Discusses how the advancement of data communication and storage through the Internet of Things (IoT) opens the possibilities of connecting sensors, robots, and devices Sheds light on how the human role in industry is decreasing due to the development of connected manufacturing floors, allowing them to take more control over the manufacturing processes, decisions, and even maintenance Covers the benefits from exploiting digital manufacturing, manufacturing enterprises, and what they expect to achieve Explains the important roles that modeling, simulation, and optimization play Investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products exploiting the I40 (industry 4.0)-enabling technologies

Download or read book Introduction to Mechanical Engineering written by J. Paulo Davim and published by Springer. This book was released on 2018-04-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook fosters information exchange and discussion on all aspects of introductory matters of modern mechanical engineering from a number of perspectives including: mechanical engineering as a profession, materials and manufacturing processes, machining and machine tools, tribology and surface engineering, solid mechanics, applied and computational mechanics, mechanical design, mechatronics and robotics, fluid mechanics and heat transfer, renewable energies, biomechanics, nanoengineering and nanomechanics. At the end of each chapter, a list of 10 questions (and answers) is provided.

Download or read book Measuring Technology and Mechatronics Automation IV written by Zhi Xiang Hou and published by Trans Tech Publications Ltd. This book was released on 2011-10-24 with total page 1650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This two-volume set contains 317 peer-reviewed papers from the Fourth International Conference on Measuring Technology and Mechatronics Automation (ICMTMA). The latter aimed to provide a high-level international forum where scientists, engineers and educators could present the state-of-the-art of measurement technology and mechatronics automation research and their applications in diverse fields.

Download or read book Advanced Manufacturing Systems ICMSE 2011 written by Dao Guo Yang and published by Trans Tech Publications Ltd. This book was released on 2011-02-21 with total page 3094 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work brings together the latest applications of, and advances in, CAD/CAM/CAE, energy storage and energy development, mining machinery manufacturing, new energy equipment and manufacturing, cloud manufacturing and extreme manufacturing, bio-manufacturing, enterprise informationization, integrated manufacturing systems, quality monitoring and control of manufacturing processes, measurement control technologies and intelligent systems, embedded systems, etc. This broad overview of the latest advances also provides a reference source for researchers in this field.