Download or read book A Networked Control System Testbed written by Andrew David Gilliam and published by . This book was released on 2004 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer Science & Business Media. This book was released on 2010-10-14 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.
Download or read book Computer Vision Systems written by Ming Liu and published by Springer. This book was released on 2017-10-10 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th International Conference on Computer Vision Systems, ICVS 2017, held in Shenzhen, China, in July 2017. The 61 papers presented were carefully reviewed and selected from 92 submissions. The papers are organized in topical sections on visual control, visual navigation, visual inspection, image processing, human robot interaction, stereo system, image retrieval, visual detection, visual recognition, system design, and 3D vision / fusion.
Download or read book Contributions to Networked and Event Triggered Control of Linear Systems written by María Guinaldo Losada and published by Springer. This book was released on 2016-05-28 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on a set of new techniques for resolving current issues in networked control systems. The main focus is on strategies for event-based control, for both centralized and decentralized architectures. The first part of the book addresses the problem of single-loop networked control systems and proposes an anticipative remote controller for dealing with delays and packet losses. The second part of the book proposes a distributed event-based control strategy for networked dynamical systems, which has been implemented in a test-bed of mobile robots, and provides readers with a thorough description of an interactive simulator used to validate the results. This thesis, examined at the Universidad Nacional de Educación a Distancia in 2013, received the award for best thesis in control engineering from the Control Engineering group of the Spanish Committee of Automatic Control in 2015.
Download or read book A Multi Vehicles Wireless Testbed for Networked Control Communications and Computing written by and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: We have constructed a testbed consisting of 4 mobile vehicles (with 4 additional vehicles being completed), each with embedded computing and communications capability for use in testing new approaches for command and control across dynamic networks. The system is being used or is planned to be used for testing of a variety of communications-related technologies, including distributed command and control algorithms, dynamically reconfigurable network topologies, source coding for real-time transmission of data in lossy environments, and multi-network communications. A unique feature of the testbed is the use of vehicles that have second order dynamics. Requiring real-time feedback algorithms to stabilize the system while performing cooperative tasks. The testbed was constructed in the Caltech Vehicles Laboratory and consists of individual vehicles with PC-based computation and controls, and multiple communications devices (802.11 wireless Ethernet, Bluetooth, and infrared). The vehicles are freely moving, wheeled platforms propelled by high performance dotted fairs. The room contains an access points for an 802.11 network, overhead visual sensing (to allow emulation of CI'S signal processing), a centralized computer for emulating certain distributed computations, and network gateways to control and manipulate communications traffic.
Download or read book Secure Control of Networked Control Systems and Its Applications written by Dong Yue and published by Springer Nature. This book was released on 2021-02-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows some secure control methods of networked control systems related to linear control system, nonlinear control system, multi-agent system and its applications in power systems. The proposed secure control methods provide some useful results about modeling of network attacks, resilient analysis and synthesis methods, active defense control method.The contents of this book are lists as followings. (1) Modeling of DoS attacks, deception attacks and replay attacks; (2)Secure control methods are proposed by combing delay system method, switched system method and event-based control method. (3) Active control methods are proposed by using model-predictive control and redundant control. (4) The proposed control methods are applied to the security problem of power system.The methods of this book include DoS attacks modeling such as, periodic jamming attack model,model-based average dwell time model, deception attack modeling and relay attack modeling; piece-wise Lyapunov-Krasoviskiifunctional method, stochastic control method; the results including resilient conditions of networked control system and related resilient control design method with linear matrix inequalities(LMIs).From this book, readers can learn about the general network attack modeling methods, resilient analysis and synthesis methods, active control methods from viewpoint of redundancy control, and secure conditions of power systems.Some fundamental knowledge prepared to read this book includes delay system theory, event triggered mechanism, T-S fuzzy system theory and frequency/voltage control of power system.
Download or read book Networked Control Systems written by Fei-Yue Wang and published by Springer Science & Business Media. This book was released on 2008-06-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked control systems (NCS) confer advantages of cost reduction, system diagnosis and flexibility, minimizing wiring and simplifying the addition and replacement of individual elements; efficient data sharing makes taking globally intelligent control decisions easier with NCS. The applications of NCS range from the large scale of factory automation and plant monitoring to the smaller networks of computers in modern cars, places and autonomous robots. Networked Control Systems presents recent results in stability and robustness analysis and new developments related to networked fuzzy and optimal control. Many chapters contain case-studies, experimental, simulation or other application-related work showing how the theories put forward can be implemented. The state-of-the art research reported in this volume by an international team of contributors makes it an essential reference for researchers and postgraduate students in control, electrical, computer and mechanical engineering and computer science.
Download or read book Cyber Security of Industrial Control Systems in the Future Internet Environment written by Stojanovi?, Mirjana D. and published by IGI Global. This book was released on 2020-02-21 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s modernized market, many fields are utilizing internet technologies in their everyday methods of operation. The industrial sector is no different as these technological solutions have provided several benefits including reduction of costs, scalability, and efficiency improvements. Despite this, cyber security remains a crucial risk factor in industrial control systems. The same public and corporate solutions do not apply to this specific district because these security issues are more complex and intensive. Research is needed that explores new risk assessment methods and security mechanisms that professionals can apply to their modern technological procedures. Cyber Security of Industrial Control Systems in the Future Internet Environment is a pivotal reference source that provides vital research on current security risks in critical infrastructure schemes with the implementation of information and communication technologies. While highlighting topics such as intrusion detection systems, forensic challenges, and smart grids, this publication explores specific security solutions within industrial sectors that have begun applying internet technologies to their current methods of operation. This book is ideally designed for researchers, system engineers, managers, networkers, IT professionals, analysts, academicians, and students seeking a better understanding of the key issues within securing industrial control systems that utilize internet technologies.
Download or read book Optimal and Robust Scheduling for Networked Control Systems written by Stefano Longo and published by CRC Press. This book was released on 2013-03-26 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal and Robust Scheduling for Networked Control Systems tackles the problem of integrating system components—controllers, sensors, and actuators—in a networked control system. It is common practice in industry to solve such problems heuristically, because the few theoretical results available are not comprehensive and cannot be readily applied by practitioners. This book offers a solution to the deterministic scheduling problem that is based on rigorous control theoretical tools but also addresses practical implementation issues. Helping to bridge the gap between control theory and computer science, it suggests that the consideration of communication constraints at the design stage will significantly improve the performance of the control system. Technical Results, Design Techniques, and Practical Applications The book brings together well-known measures for robust performance as well as fast stochastic algorithms to assist designers in selecting the best network configuration and guaranteeing the speed of offline optimization. The authors propose a unifying framework for modelling NCSs with time-triggered communication and present technical results. They also introduce design techniques, including for the codesign of a controller and communication sequence and for the robust design of a communication sequence for a given controller. Case studies explore the use of the FlexRay TDMA and time-triggered control area network (CAN) protocols in an automotive control system. Practical Solutions to Your Time-Triggered Communication Problems This unique book develops ready-to-use engineering tools for large-scale control system integration with a focus on robustness and performance. It emphasizes techniques that are directly applicable to time-triggered communication problems in the automotive industry and in avionics, robotics, and automated manufacturing.
Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer. This book was released on 2010-10-15 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.
Download or read book Supervisory Control of Networked Control Systems written by and published by . This book was released on 2006 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project's objective was to develop methods for the reliable and robust control of dynamical systems over wireless communication networks. Specific accomplishments of this project were the identification of fundamental bounds on the optimal control system performance achievable with bit-rate limited feedback, liveness-enforcing supervisory control of concurrent systems modelled by Petri nets, methods ensuring cohesive swarming of multi-agent systems under consensus filtering, adaptive real-time scheduling methods for feedback control, and the development of a wireless autonomous mobile robot testbed.
Download or read book Intelligent Networked Teleoperation Control written by Zhijun Li and published by Springer. This book was released on 2015-05-15 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a unified framework for networked teleoperation systems involving multiple research fields: networked control systems for linear and nonlinear forms, bilateral teleoperation, trilateral teleoperation, multilateral teleoperation and cooperative teleoperation. It closely examines networked control as a field at the intersection of systems & control and robotics and presents a number of experimental case studies on testbeds for robotic systems, including networked haptic devices, robotic network systems and sensor network systems. The concepts and results outlined are easy to understand, even for readers fairly new to the subject. As such, the book offers a valuable reference work for researchers and engineers in the fields of systems & control and robotics.
Download or read book Analysis and Design of Networked Control Systems under Attacks written by Yuan Yuan and published by CRC Press. This book was released on 2018-09-21 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book adopts a systematic view of the control systems in cyber-physical systems including the security control of the optimal control system, security control of the non-cooperative game system, quantify the impact of the Denial-of-Service attacks on the optimal control system, and the adaptive security control of the networked control systems. Because the cyber-physical system is a hybrid system, it adopts cross layer approach to handle the security control of the CPS. It presents a number of attack models according to the attack scenario and defense facilities, and a number of cross-layer co-design methodologies to secure the control of CPS.
Download or read book Secure IT Systems written by Sonja Buchegger and published by Springer. This book was released on 2015-10-26 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 20th Nordic Conference on Secure IT Systems, held in Stockholm, Sweden, in October 2015. The 11 full papers presented together with 5 short papers in this volume were carefully reviewed and selected from 38 submissions. They are organized in topical sections named: cyber-physical systems security, privacy, cryptography, trust and fraud, and network and software security.
Download or read book Co design Approaches to Dependable Networked Control Systems written by Daniel Simon and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked Control Systems (NCS) is a growing field of application and calls for the development of integrated approaches requiring multidisciplinary skills in control, real-time computing and communication protocols. This book describes co-design approaches, and establishes the links between the QoC (Quality of Control) and QoS (Quality of Service) of the network and computing resources. The methods and tools described in this book take into account, at design level, various parameters and properties that must be satisfied by systems controlled through a network. Among the important network properties examined are the QoC, the dependability of the system, and the feasibility of the real-time scheduling of tasks and messages. Correct exploitation of these approaches allows for efficient design, diagnosis, and implementation of the NCS. This book will be of great interest to researchers and advanced students in automatic control, real-time computing, and networking domains, and to engineers tasked with development of NCS, as well as those working in related network design and engineering fields.
Download or read book Packet Based Control for Networked Control Systems written by Yun-Bo Zhao and published by Springer. This book was released on 2017-09-14 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a unique, packet-based co-design control framework for networked control systems. It begins by providing a comprehensive survey of state-of-the-art research on networked control systems, giving readers a general overview of the field. It then verifies the proposed control framework both theoretically and experimentally – the former using multiple control methodologies, and the latter using a unique online test rig for networked control systems. The framework investigates in detail the most common, communication constraints, including network-induced delays, data packet dropout, data packet disorders, and network access constraints, as well as multiple controller design and system analysis tools such as model predictive control, linear matrix inequalities and optimal control. This unique and complete co-design framework greatly benefits researchers, graduate students and engineers in the fields of control theory and engineering.
Download or read book Analysis and Synthesis of Networked Control Systems written by Yuanqing Xia and published by Springer. This book was released on 2011-03-17 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Synthesis of Networked Control Systems focuses on essential aspects of this field, including quantization over networks, data fusion over networks, predictive control over networks and fault detection over networks. The networked control systems have led to a complete new range of real-world applications. In recent years, the techniques of Internet of Things are developed rapidly, the research of networked control systems plays a key role in Internet of Things. The book is self-contained, providing sufficient mathematical foundations for understanding the contents of each chapter. It will be of significant interest to scientists and engineers engaged in the field of Networked Control Systems. Dr. Yuanqing Xia, a professor at Beijing Institute of Technology, has been working on control theory and its applications for over ten years.
