Download or read book A Modular Multi source X ray Tube for Novel Computed Tomography Applications written by Brandon Joseph Walker and published by . This book was released on 2017 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modular implementation of a scanning multi-source x-ray tube is designed for the increasing number of multi-source imaging applications in computed tomography (CT). An electron beam array coupled with an oscillating magnetic deflector is proposed as a means for producing an x-ray focal spot at any position along a line. The preliminary multi-source model includes three thermionic electron guns that are deflected in tandem by a slowly varying magnetic field and pulsed according to a scanning sequence developed for a high-speed CT scanner. Particle tracking simulations with particle dynamics analysis software demonstrate that three 100 keV electron beams are laterally swept a combined distance of 15 cm over a stationary target with an oscillating magnetic field of 102 G perpendicular to the beam axis. Beam modulation is accomplished using 25 μs pulse widths to a grid electrode with a reverse gate bias of -500 V and an extraction voltage of +1000 V. Projected focal spot diameters are approximately 1 mm for 138 mA electron beams and the stationary target stays within thermal limits for the 14 kW module. This concept could be used as the basis for increasing scan throughput for high-speed stationary CT scanners, for lowering dose with virtual fan beam formation, for reducing scatter radiation in cone-beam CT, or in other industrial applications. A benchtop implementation of the multi-source x-ray tube model is subsequently developed to demonstrate proof of concept for the system. Particle tracking simulations for the benchtop system demonstrate that three 80 keV electron beams are able to be focused and laterally swept a combined distance of 15 cm over a stationary target with an oscillating magnetic field of approximately 60 G. Beam spot diameters are approximately 1 mm for 27 mA beams and the stationary target stays well within thermal limits. The relevant hardware and control circuits are developed for incorporation into a physical prototype, including the development of a programmable high voltage bi-polar square wave pulser for electron beam gating. The particle tracking, electromagnetic, and thermal simulations inform the design of a 2.2 kW benchtop system that is currently under construction.
Download or read book Modern Diagnostic X Ray Sources written by Rolf Behling and published by CRC Press. This book was released on 2021-04-19 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now fully updated, the second edition of Modern Diagnostic X-Ray Sources: Technology, Manufacturing, Reliability gives an up-to-date summary of X-ray source technology and design for applications in modern diagnostic medical imaging. It lays a sound groundwork for education and advanced training in the physics of X-ray production, X-ray interactions with matter, and imaging modalities and assesses their prospects. The book begins with a comprehensive and easy-to-read historical overview of X-ray tube and generator development, including key achievements leading up to the current technological and economic state of the field. The book covers the physics of X-ray generation, including the process of constructing X-ray source devices. The stand-alone chapters can be read in order or in selections. They take you inside diagnostic X-ray tubes, illustrating their design, functions, metrics for validation, and interfaces. The detailed descriptions enable objective comparison and benchmarking. This detailed presentation of X-ray tube creation and functions enables you to understand how to optimize tube efficiency, particularly with consideration for economics and environmental care. It also simplifies faultfinding. Along with covering the past and current state of the field, the book assesses the future regarding developing new X-ray sources that can enhance performance and yield greater benefits to the scientific community and to the public. After heading international R&D, marketing and advanced development for X-ray sources with Philips, and working in the X-ray industry for more than four decades, Rolf Behling retired in 2020 and is now the owner of the consulting firm XtraininX, Germany. He holds numerous patents and is continuously publishing, consulting and training.
Download or read book Design and Development of a Compact X ray Tube for Stationary CT Architecture written by Ashish Vighnahar Avachat and published by . This book was released on 2018 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multisource architectures enable sweeping one or more x-ray beams across the imaging field-of-view faster than physically moving a single x-ray source and/or a detector. Hence, these architectures are attractive for the applications in which temporal resolution plays an important role, for example, cardiac computed tomography (CT) or real-time CT. One of the recent developments in multisource architectures for CT imaging is stationary CT architecture, whereby two separate stationary arrays - one for x-ray sources and one for detectors - are utilized to sweep one or more x-ray beams along the gantry and acquire 360 degree projections. To have a stationary CT architecture and still acquire enough number of projections for a successful CT reconstruction, an array of closely spaced and individually addressable x-ray sources that are compact in size and are capable of producing x-ray pulses at a high frequency is required. This work is a part of a research continuum toward developing a compact x-ray tube potentially to be used in the said stationary CT architecture. The central hypothesis of the research conducted is that, a field emission (FE) based cold cathode and transmission type anode allow the size of an x-ray tube to be reduced, and still generate a required x-ray pulse. Specifically, this work entails the design of an electrostatic lens for electron focusing in a compact x-ray tube and the initial experimental studies of a prototype compact x-ray tube. Using particle-in-cell code, OOPIC PRO, electron field emission from CNT cathode and electron focusing by three types of electrostatic lenses--Single lens, Double lens, and Einzel lens --were simulated, compared, and studied for anode voltages of 30 kV p to 140 kV p. The first-generation prototype compact x-ray tube was developed and studied. The initial studies conducted to understand the performance of the prototype and its control parameters. After further optimization of size and testing, this compact x-ray tube design holds a potential to be used in a stationary CT architecture for improved temporal resolution."--Abstract, page iv.
Download or read book Computed Tomography E Book written by Euclid Seeram and published by Elsevier Health Sciences. This book was released on 2015-09-02 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build the foundation necessary for the practice of CT scanning with Computed Tomography: Physical Principles, Clinical Applications, and Quality Control, 4th Edition. Written to meet the varied requirements of radiography students and practitioners, this two-color text provides comprehensive coverage of the physical principles of CT and its clinical applications. Its clear, straightforward approach is designed to improve your understanding of sectional anatomic images as they relate to CT — and facilitate communication between CT technologists and other medical personnel. - Comprehensively covers CT at just the right depth for technologists – going beyond superficial treatment to accommodate all the major advances in CT. One complete CT resource covers what you need to know! - The latest information on advances in CT imaging, including: advances in volume CT scanning; CT fluoroscopy; multi-slice applications like 3-D imaging, CT angiography, and virtual reality imaging (endoscopy) – all with excellent coverage of state-of-the-art principles, instrumentation, clinical applications, and quality control. - More than 600 photos and line drawings help students understand and visualize concepts. - Chapter outlines show you what is most important in every chapter. - Strong ancillary package on Evolve facilitates instructor preparation and provides a full complement of support for teaching and learning with the text - NEW! Highlights recent technical developments in CT, such as: the iterative reconstruction; detector updates; x-ray tube innovations; radiation dose optimization; hardware and software developments; and the introduction of a new scanner from Toshiba. - NEW! Learning Objectives and Key Terms at the beginning of every chapter and a Glossary at the end of the book help you organize and focus on key information. - NEW! End-of-Chapter Questions provide opportunity for review and greater challenge. - NEW! An added second color aids in helping you read and retain pertinent information
Download or read book Design and Applications of Cold cathode X ray Imaging Systems written by Avilash Kalpathy Cramer and published by . This book was released on 2021 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography (CT) and planar x-ray imaging are mainstays of modern clinical care. The electron generation mechanism in standard x-ray tubes - specifically, a thermionic cathode - is reliable and capable of high current. However, thermionic cathodes are bulky, and cannot be pulsed quickly. Non-thermionic (’cold-cathode’) electron generation can be exploited to make a smaller and rapidly pulsable x-ray source. Such an x-ray source could improve not just the portability of x-ray devices, but would allow for a CT system to operate by pulsing a distributed ring of x-ray sources instead of rotating a single large x-ray source. Furthermore, cold-cathode x-ray sources could allow for new signal acquisition and processing paradigms in the x-ray domain. This includes time-based image acquisition techniques, such as elastography and photon-counting measurements. In this dissertation, I discuss (1) the development of two novel types of cold-cathode x-ray sources: an ultraviolet photocathode-based source, and a silicon field emission chip; (2) novel methods for planar x-ray image acquisition, including a demonstration of dynamic x-ray elastography using a pulsed photocathode x-ray source; and (3) applications of modern signal processing techniques to the tomographic image reconstruction problem. In an epilogue, I discuss our research on N95 respirator sterilization and re-use for crisis situations.
Download or read book Applications of X ray Computed Tomography in the Geosciences written by Florias Mees and published by Geological Society of London. This book was released on 2003 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography (CT) is a technique that allows non-destructive imaging and quantification of internal features of objects. X-ray CT reveals differences in density and atomic composition and can therefore be used for the study of porosity, the relative distribution of contrasting solid phases and the penetration of injected solutions. In this book, various applications of X-ray CT in the geosciences are illustrated by papers covering a wide range of disciplines, including petrology, soil science, petroleum geology, geomechanics and sedimentology.
Download or read book X Ray Computed Tomography in Biomedical Engineering written by Robert Cierniak and published by Springer Science & Business Media. This book was released on 2011-01-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computed Tomography gives a detailed overview of various aspects of computed tomography. It discusses X-ray CT tomography from a historical point of view, the design and physical operating principles of computed tomography apparatus, the algorithms of image reconstruction and the quality assessment criteria of tomography scanners. Algorithms of image reconstruction from projections, a crucial problem in medical imaging, are considered in depth. The author gives descriptions of the reconstruction methods related to tomography scanners with a parallel X-ray beam, trough solutions with fan-shaped beam and successive modifications of spiral scanners. Computed Tomography contains a dedicated chapter for those readers who are interested in computer simulations based on studies of reconstruction algorithms. The information included in this chapter will enable readers to create a simulation environment in which virtual tomography projections can be obtained in all basic projection systems. This monograph is a valuable study on computed tomography that will be of interest to advanced students and researchers in the fields of biomedical engineering, medical electronics, computer science and medicine.
Download or read book Transactions of the American Nuclear Society written by American Nuclear Society and published by . This book was released on 2001 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clinical Applications of SPECT CT written by International Atomic Energy Agency and published by . This book was released on 2008 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated single photon emission computed tomography and computed tomography (SPECT/CT) has emerged as an important diagnostic tool in medical imaging, where morphological markers are superimposed on anatomical images to allow a more thorough examination and higher levels of diagnostic accuracy. This TECDOC presents an overview of the SPECT/CT technology for use by nuclear medicine physicians, radiologists and clinical practitioners. The publication also covers the current medical status of SPECT/CT imaging, the role of this technology in the clinical management of patients and possible trends for future development.
Download or read book CT Scanning written by Karupppasamy Subburaj and published by BoD – Books on Demand. This book was released on 2011-10-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its introduction in 1972, X-ray computed tomography (CT) has evolved into an essential diagnostic imaging tool for a continually increasing variety of clinical applications. The goal of this book was not simply to summarize currently available CT imaging techniques but also to provide clinical perspectives, advances in hybrid technologies, new applications other than medicine and an outlook on future developments. Major experts in this growing field contributed to this book, which is geared to radiologists, orthopedic surgeons, engineers, and clinical and basic researchers. We believe that CT scanning is an effective and essential tools in treatment planning, basic understanding of physiology, and and tackling the ever-increasing challenge of diagnosis in our society.
Download or read book Industrial X Ray Computed Tomography written by Simone Carmignato and published by Springer. This book was released on 2017-10-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.
Download or read book Multislice CT written by Konstantin Nikolaou and published by Springer. This book was released on 2019-08-06 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of this well-received book offers a comprehensive update on recent developments and trends in the clinical and scientific applications of multislice computed tomography. Following an initial section on the most significant current technical aspects and issues, detailed information is provided on a comprehensive range of diagnostic applications. Imaging of the head and neck, the cardiovascular system, the abdomen, and the lungs is covered in depth, describing the application of multislice CT in a variety of tumors and other pathologies. Emerging fields such as pediatric imaging and CT-guided interventions are fully addressed, and emergency CT is also covered. Radiation exposure, dual-energy imaging, contrast enhancement, image postprocessing, CT perfusion imaging, and CT angiography all receive close attention. The new edition has been comprehensively revised and complemented by contributions from highly experienced and well-known authors who offer diverse perspectives, highlighting the possibilities offered by the most modern multidetector CT systems. This book will be particularly useful for general users of CT systems who wish to upgrade and enhance not only their machines but also their knowledge.
Download or read book Medical Imaging Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2016-07-18 with total page 2118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical imaging has transformed the ways in which various conditions, injuries, and diseases are identified, monitored, and treated. As various types of digital visual representations continue to advance and improve, new opportunities for their use in medical practice will likewise evolve. Medical Imaging: Concepts, Methodologies, Tools, and Applications presents a compendium of research on digital imaging technologies in a variety of healthcare settings. This multi-volume work contains practical examples of implementation, emerging trends, case studies, and technological innovations essential for using imaging technologies for making medical decisions. This comprehensive publication is an essential resource for medical practitioners, digital imaging technologists, researchers, and medical students.
Download or read book Industrial Process Gamma Tomography written by International Atomic Energy Agency and published by . This book was released on 2008 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Physics of CT Dosimetry written by Robert L. Dixon and published by CRC Press. This book was released on 2019-03-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the physics of CT dosimetry and provides practical guidance on best practice for medical researchers and practitioners. A rigorous description of the basic physics of CT dosimetry is presented and illustrates flaws of the current methodology. It also contains helpful (and rigorous) shortcuts to reduce the measurement workload for medical physicists. The mathematical rigor is accompanied by easily-understood physical explanations and numerous illustrative figures. Features: Authored by a recognised expert in the field and award-winning teacher Includes derivations for tube current modulation and variable pitch as well as stationary table techniques Explores abnormalities present in dose-tracking software based on CTDI and presents methods to correct them
Download or read book Biosimulation in Biomedical Research Health Care and Drug Development written by Erik Mosekilde and published by Springer Science & Business Media. This book was released on 2011-11-01 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosimulation is an approach to biomedical research and the treatment of patients in which computer modeling goes hand in hand with experimental and clinical work. Constructed models are used to interpret experimental results and to accumulate information from experiment to experiment. This book explains the concepts used in the modeling of biological phenomena and goes on to present a series of well-documented models of the regulation of various genetic, cellular and physiological processes. The way how the use of computer models allows optimization of cancer treatment for individual patients is discussed and models of interacting nerve cells that can be used to design new treatments for patients with Parkinson's disease are explained. Furthermore this volume provides an overview on the use of models in industry, and presents the view of regulatory agencies on the topic.
Download or read book 99mTc Sestamibi written by Jan Bucerius and published by Springer Science & Business Media. This book was released on 2011-09-22 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: 99mTc-sestamibi is a single-photon emission computed tomography (SPECT) radiotracer that is widely used for the imaging of myocardial perfusion, as well as a variety of malignant and benign diseases. 99mTc-Sestamibi – Clinical Applications provides a detailed and informative overview of almost all the oncologic and non-oncologic applications of 99mTc-sestamibi SPECT, including several relatively rare indications. Different disease-related protocols for 99mTc-sestamibi SPECT are presented, and for each disease a comprehensive summary of the relevant pathology and epidemiology is provided. Throughout, there is a strong emphasis on the practical aspects of use of this popular tracer, including instructions for the preparation of several commercially available tracer kits. Clinical practitioners will find this book to be an invaluable guide to the application and benefits of 99mTc-sestamibi SPECT in both the inpatient and the outpatient setting.
