Download or read book A Model for Predicting Life Cycles of Concrete Bridge Decks Exposed to De icing Salts written by Donald E. Forbes and published by . This book was released on 1979 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bridge Service Life Design written by Elizabeth Rose Bales and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: High costs and traffic disruption associated with the deterioration of reinforced concrete bridge decks because of corrosion have sparked renewed interest in service life design. Reinforced concrete bridge decks are exposed to chlorides from deicing salts; when the chlorides reach the steel reinforcement, they initiate corrosion. This study supports the adoption of the methodology described in fib Bulletin 34, Model Code for Service Life Design, for reinforced concrete bridge decks in Virginia. Concrete mixture properties and environmental exposure conditions were characterized. Values particular to regions within Virginia and suggested default values were identified and organized in a database to support the development of service life design guidelines. The predicted service life for eight bridge decks using low-cracking concrete and corrosion-resistant reinforcement (VDOT Reinforcement Class I, MMFX, ASTM 1035) was evaluated. The service life model was also implemented in a life-cycle cost analysis for a case study bridge, which found superior reliability of corrosion-resistant reinforcement from a life-cycle perspective. In addition to supporting the implementation of service life design, several investigations identified key assumptions and variables in the service life model and identified critical areas for future characterization. The partial differential equation for apparent chloride diffusion was solved with both an approximate analytical approach and a numerical approach. Delays in the application of deicing salt were investigated using the numerical approach, and a ramp-type function for surface chloride concentration was explored using the analytical approach. Aging coefficients based on curing were also considered. A sensitivity analysis identified the aging coefficient and the surface chloride concentration as the most critical variables. The study concluded that sufficient data are available to implement the fib Model Code for Service Life Design, but that caution in interpreting results is warranted because of the high uncertainty associated with the most critical variables. According to the results of the service life analyses, the regional climatic variability and differences in mix design across Virginia indicate that a "one-size-fits-all" approach to bridge deck specifications may not be appropriate. The use of corrosion-resistant steel and low-cracking concrete mixtures can provide a substantial (greater than 100 years) bridge deck service life

Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 24 (thesis year 1979) a total of 10,033 theses titles from 26 Canadian and 215 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 24 reports these submitted in 1979, on occasion, certain universities do report theses submitted in previous years but not reported at the time.

Download or read book PRO 16 International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures written by D. Naus and published by RILEM Publications. This book was released on 2000 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Relating Material Properties to Exposure Conditions for Predicting Service Life in Concrete Bridge Decks in Indiana written by Vinit Barde and published by Purdue University Press. This book was released on 2007-12-01 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges in the US are deteriorating at an alarming rate. It has been estimated that transportation agencies across the US invest more than 5 billion dollars on concrete bridge repair and renovation annually. To meet the needs of transportation industry, high performance concrete (HPC) has been developed for the construction of bridges. However, the link between material properties and field performance is not completely established. Goodspeed et al. [1996] defined the performance of concrete using four material parameters that describe durability and four material parameters that describe mechanical properties. However, material properties alone cannot entirely define field performance. Rather some consideration is needed to quantify the conditions to which the concrete will be exposed. The exposure conditions vary based on the geographical location. This work relates material properties with the exposure conditions typical of those in the state of Indiana to estimate the performance of concrete bridge decks. The exposure conditions in the state of Indiana were assessed. Specifically, temperature, rainfall, wetting events, freeze thaw cycles, and relative humidity have been classified. To assess the variation in these parameters across the state, contour maps were developed using information from cities in the state of Indiana as well as cities in surrounding states. The eight parameters suggested by Goodspeed et al. [1996] were reviewed. Three key distresses behavior (chloride ingress, freezing and thawing, and shrinkage cracking) have been investigated in depth. Relationships have been developed to relate measured material properties (from the results of AASHTO/ASTM tests) with the predicted performance of the concrete structure under different exposure condition. First, a model is presented that relates the results of Rapid Chloride Permeability Test (RCPT) with the anticipated service life of bridge deck against corrosion due to chloride ingress. Second, a model is presented that relates results of sorptivity, porosity, and critical saturation with the anticipated service life of concrete exposed to freezing and thawing. Third, a model is presented that relates the shrinkage of concrete with the potential for premature cracking. The results of each of the models have been presented for conditions that are typical of the state of Indiana.

Download or read book Bridge Deck Service Life Prediction and Costs written by and published by . This book was released on 2007 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: The service life of Virginia's concrete bridge decks is generally controlled by chloride-induced corrosion of the reinforcing steel as a result of the application of winter maintenance deicing salts. A chloride corrosion model accounting for the variable input parameters using Monte Carlo resampling was developed. The model was validated using condition surveys from 10 Virginia bridge decks built with bare steel. The influence of changes in the construction specifications of w/c = 0.47 and 0.45 and w/cm = 0.45 and a cover depth increase from 2 to 2.75 inches was determined. Decks built under the specification of w/cm = 0.45 (using slag or fly ash) and a 2.75 inch cover depth have a maintenance free service life of greater than 100 years, regardless of the type of reinforcing steel. Galvanized, MMFX-2, and stainless steel, in order of increasing reliability of a service life of greater than 100 years, will provide a redundant corrosion protection system. Life cycle cost analyses were conducted for polymer concrete and portland cement based overlays as maintenance activities. The most economical alternative is dependent on individual structure conditions. The study developed a model and computer software that can be used to determine the time to first repair and rehabilitation of individual bridge decks taking into account the time for corrosion initiation, time from initiation to cracking, and time for corrosion damage to propagate to a state requiring repair.

Download or read book Bridge Maintenance Safety Management Life Cycle Sustainability and Innovations written by Hiroshi Yokota and published by CRC Press. This book was released on 2021-04-20 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations contains lectures and papers presented at the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), held in Sapporo, Hokkaido, Japan, April 11–15, 2021. This volume consists of a book of extended abstracts and a USB card containing the full papers of 571 contributions presented at IABMAS 2020, including the T.Y. Lin Lecture, 9 Keynote Lectures, and 561 technical papers from 40 countries. The contributions presented at IABMAS 2020 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of maintenance, safety, management, life-cycle sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle sustainability, standardization, analytical models, bridge management systems, service life prediction, maintenance and management strategies, structural health monitoring, non-destructive testing and field testing, safety, resilience, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, and application of information and computer technology and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on maintenance, safety, management, life-cycle sustainability and technological innovations of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including engineers, researchers, academics and students from all areas of bridge engineering.

Download or read book PRO 29 2nd International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures written by Dan J. Naus and published by RILEM Publications. This book was released on 2003 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Models for Predicting Corrosion induced Cracking Spalling delamination of Rehabilitated Rc Bridges Decks written by Kai Zhou and published by . This book was released on 2005 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Research in Uncertainty Modeling and Analysis written by Bilal M. Ayyub and published by Springer Science & Business Media. This book was released on 2007-12-29 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application areas of uncertainty are numerous and diverse, including all fields of engineering, computer science, systems control and finance. Determining appropriate ways and methods of dealing with uncertainty has been a constant challenge. The theme for this book is better understanding and the application of uncertainty theories. This book, with invited chapters, deals with the uncertainty phenomena in diverse fields. The book is an outgrowth of the Fourth International Symposium on Uncertainty Modeling and Analysis (ISUMA), which was held at the center of Adult Education, College Park, Maryland, in September 2003. All of the chapters have been carefully edited, following a review process in which the editorial committee scrutinized each chapter. The contents of the book are reported in twenty-three chapters, covering more than . . ... pages. This book is divided into six main sections. Part I (Chapters 1-4) presents the philosophical and theoretical foundation of uncertainty, new computational directions in neural networks, and some theoretical foundation of fuzzy systems. Part I1 (Chapters 5-8) reports on biomedical and chemical engineering applications. The sections looks at noise reduction techniques using hidden Markov models, evaluation of biomedical signals using neural networks, and changes in medical image detection using Markov Random Field and Mean Field theory. One of the chapters reports on optimization in chemical engineering processes.

Download or read book Life Cycle Civil Engineering written by Fabio Biondini and published by CRC Press. This book was released on 2008-05-28 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life-Cycle Civil Engineering contains the papers presented at the First International Symposium on Life-Cycle Civil Engineering (IALCCE 08), held in Villa Monastero, Varenna, Lake Como, Italy, 10-14 June, 2008. It consists of a book and a CD-ROM containing 150 papers, including eight keynote papers and 142 technical contributions from 28 countries.

Download or read book Innovation Communication and Engineering written by Teen-Hang Meen and published by CRC Press. This book was released on 2013-10-08 with total page 2334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the proceedings of the 2013 International Conference on Innovation, Communication and Engineering (ICICE 2013). This conference was organized by the China University of Petroleum (Huadong/East China) and the Taiwanese Institute of Knowledge Innovation, and was held in Qingdao, Shandong, P.R. China, October 26 - November 1, 2013. The conference received 653 submitted papers from 10 countries, of which 214 papers were selected by the committees to be presented at ICICE 2013. The conference provided a unified communication platform for researchers in a wide range of fields from information technology, communication science, and applied mathematics, to computer science, advanced material science, design and engineering. This volume enables interdisciplinary collaboration between science and engineering technologists in academia and industry as well as networking internationally. Consists of a book of abstracts (260 pp.) and a USB flash card with full papers (912 pp.).

Download or read book Life Cycle of Structures and Infrastructure Systems written by Fabio Biondini and published by CRC Press. This book was released on 2023-06-28 with total page 6293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life-Cycle of Structures and Infrastructure Systems contains the lectures and papers presented at IALCCE 2023- The Eighth International Symposium on Life-Cycle Civil Engineering, held at Politecnico di Milano, Milan, Italy, 2-6 July, 2023. This book contains the full papers of 514 contributions presented at IALCCE 2023, including the Fazlur R. Khan Plenary Lecture, nine Keynote Lectures, and 504 technical papers from 45 countries. The papers cover recent advances and cutting-edge research in the field of life-cycle civil engineering, including emerging concepts and innovative applications related to life-cycle design, assessment, inspection, monitoring, repair, maintenance, rehabilitation, and management of structures and infrastructure systems under uncertainty. Major topics covered include life-cycle safety, reliability, risk, resilience and sustainability, life-cycle damaging processes, life-cycle design and assessment, life-cycle inspection and monitoring, life-cycle maintenance and management, life-cycle performance of special structures, life-cycle cost of structures and infrastructure systems, and life-cycle-oriented computational tools, among others. This Open Access Book provides both an up-to-date overview of the field of life-cycle civil engineering and significant contributions to the process of making more rational decisions to mitigate the life-cycle risk and improve the life-cycle reliability, resilience, and sustainability of structures and infrastructure systems exposed to multiple natural and human-made hazards in a changing climate. It will serve as a valuable reference to all concerned with life-cycle of civil engineering systems, including students, researchers, practicioners, consultants, contractors, decision makers, and representatives of managing bodies and public authorities from all branches of civil engineering.

Download or read book Predicting Service Life of Concrete Bridge Decks Subject to Reinforcement Corrosion written by PD. Cady and published by . This book was released on 1992 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deterioration of the nation's highway infrastructure is proceeding at an alarming rate. A major element of the problem involves chloride-induced corrosion of reinforcing steel in concrete bridge components. In order to rationally implement bridge management strategies, it is generally recognized that life-cycle cost analyses of viable alternatives are required. This necessitates the development of reliable means for predicting the service lives of alternative procedures. The major components of a rational model for predicting service life in this scenario center on the time for the chloride ion concentration to reach the corrosion threshold level at reinforcement locations and the corrosion reaction time necessary to produce loss of serviceability. Obviously, the definition of the terminal serviceability in terms of deterioration level also constitutes an important element of the model. This paper examines a semi-empirical deterioration model for predicting service life based on fundamental concepts, augmented with historical data.

Download or read book Concrete Bridge Protection and Rehabilitation written by Richard E. Weyers and published by . This book was released on 1994 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a study on estimating the service life cycle of reinforced concrete bridge components exposed to chloride-laden environments. Current treatment options are identified and an opinion survey was used to obtain first estimates of service life. To estimate the service life of untreated and rehabilitated bridge decks, data from 52 bridge decks distributed in different environmental conditions were collected. Models estimating the service life of untreated and rehabilitated bridge decks were developed and compared with models developed based on historical data and the time-to-rehabilitate model.

Download or read book Engineering Asset Management and Infrastructure Sustainability written by Joseph Mathew and published by Springer Science & Business Media. This book was released on 2012-05-11 with total page 1131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Asset Management 2010 represents state-of-the art trends and developments in the emerging field of engineering asset management as presented at the Fifth World Congress on Engineering Asset Management (WCEAM). The proceedings of the WCEAM 2010 is an excellent reference for practitioners, researchers and students in the multidisciplinary field of asset management, covering topics such as: Asset condition monitoring and intelligent maintenance Asset data warehousing, data mining and fusion Asset performance and level-of-service models Design and life-cycle integrity of physical assets Education and training in asset management Engineering standards in asset management Fault diagnosis and prognostics Financial analysis methods for physical assets Human dimensions in integrated asset management Information quality management Information systems and knowledge management Intelligent sensors and devices Maintenance strategies in asset management Optimisation decisions in asset management Risk management in asset management Strategic asset management Sustainability in asset management

Download or read book Maintenance Safety Risk Management and Life Cycle Performance of Bridges written by Nigel Powers and published by CRC Press. This book was released on 2018-07-04 with total page 5447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.