Download or read book A Model based Tool Management System for Flexible Manufacturing Systems written by Ziad Yammine and published by . This book was released on 1991 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tool Management Systems Design For Flexible Manufacturing Systems written by PAUL G. RANKY and published by . This book was released on 1986 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Tool Management System Design for Flexible Manufacturing Systems FMS written by Paul G. Ranky and published by . This book was released on 1986 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Simulation and Control of Flexible Manufacturing Systems written by MengChu Zhou and published by World Scientific. This book was released on 1999 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.

Download or read book Flexible Manufacturing Systems written by Horst Tempelmeier and published by Wiley-Interscience. This book was released on 1993-10-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now, this comprehensive and systematic overview of both the design models and quantitative solution methods for FMS support, configuration, and operation rectifies that problem. Students, production managers/planners, and FMS installation planners can now find everything they need in one authoritative and up-to-date source.

Download or read book Flexible Manufacturing Systems in Practice written by Joseph Talavage and published by CRC Press. This book was released on 2020-09-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for all those interested in flexible manufacturing systems (FMS) and other forms of computerized manufacturing systems (CMS). It deals with many aspects of the design, operation, and simulation of FMS and explains the origins of FMS.

Download or read book Design and Development of a Tool Management System in Flexible Manufacturing Systems written by Liu Chao-Liang and published by . This book was released on 1993 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Design and Operation of FMS written by Paul Ránky and published by . This book was released on 1983 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tool Management Systems in Flexible Manufacturing Systems written by Firas Ghussein and published by . This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flexible Manufacturing Systems written by Hans-Jürgen Warnecke and published by . This book was released on 1988 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hemodynamics makes it possible to characterize in a quantitative way, the function of the heart and arterial system, thereby producing information about what genetic and molecular processes are of importance for cardiovascular function. Snapshots of Hemodynamics: An Aid for Clinical Research and Graduate Education by Nico Westerhof, Nikos Stergiopulos and Mark I. M. Noble is a quick reference guide designed to help basic and clinical researchers as well as graduate students to understand hemodynamics. The layout of the book provides short and independent chapters that provide teaching diagrams as well as clear descriptions of the essentials of basic and applied principles of hemodynamics. References are provided at the end of each chapter for further reading and reference.

Download or read book Computer Assisted Management and Control of Manufacturing Systems written by Spyros G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modem manufacturing systems involve many processes and operations that can be monitored and controlled at several levels of intelligence. At the highest level there is a computer that supervises the various manufacturing functions, whereas at the lowest level there are stand alone computer controlled systems of manufacturing processes and robotic cells. Until recenty computer-aided manufacturing systems constituted isolated "islands" of automation, each oriented to a particular application, but present day systems offer integrated approaches to manufacturing and enterprise operations. These modem systems, known as computer-integrated manufacturing (CIM) systems, can easily meet the current performance and manufacturing competitiveness requirements under strong environmental changes. CIM systems are much of a challenge, and imply a systemic approach to the design and operation of a manufacturing enterprise. Actualy, a CIM system must take into account in a unified way the following three views : the user view, the technology view, and the enterprise view. This means that CIM includes both the engineering and enterprise planning and control activities, as well as the information flow activities across all the stages of the system.

Download or read book Simulation of Tool Management in Flexible Manufacturing System written by N- T. Wang and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flexible Manufacturing Systems Handbook written by Charles Stark Draper Laboratory. Automation and Management Systems Division and published by William Andrew. This book was released on 1984 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes flexible manufacturing systems, representing a relatively new method for increasing productivity. Originated in the 1960's, the technology is now proven & increasingly available. FMSs are particularly attractive to manufacturers producing in middle volume ranges.

Download or read book Modeling Manufacturing Systems written by Paolo Brandimarte and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced modeling techniques are a necessary tool in order to design and manage manufacturing systems effectively. This book contains a set of tutorial chapters on topics ranging from aggregate production planning to real time control, including predictive and reactive scheduling, flow management in assembly systems, simulation of robotic cells, design of manufacturing systems under uncertainty and a historical perspective on production management philosophies. The book will be of interest both to researchers and practitioners, including graduate students in Manufacturing Engineering and Operations Research.

Download or read book Implementing Flexible Manufacturing Systems written by Nigel R. Greenwood and published by John Wiley & Sons. This book was released on 1988 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible Manufacturing Systems (FMS) are computer-controlled, automated production lines capable of varied outputs: they put together computing software, robotics, manufacturing technology with existing engineering design skills to produce a very flexible system. Based on the author's own practical experience, this book provides a general insider's appreciation in keeping with current thinking in engineering education which will be suitable for advanced students. For the professional engineer, it stresses commercial as well as technical considerations.

Download or read book Flexible Manufacturing Systems in Practice written by Roger Bonetto and published by Core/Mechanical. This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: