Download or read book Distributed Debugging An Integrated Approach written by Stephen Lesavich and published by Coconut Avenue, Inc.. This book was released on 1991-03-15 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and development of digital computer software for distributed concurrent programming environments has increased significantly in the past few years. The presence of remote processors and concurrency greatly complicates the creation, analysis, testing, and debugging of all software produced for these environments. It appears that few tools developed for sequential environments are adequate for debugging software programs in a distributed concurrent environment. The distributed concurrent environment also presents the need for special debugging tools that were not needed for sequential environments. This research will present a new model for debugging programs in a distributed concurrent programming environment. This new model was used to design, develop, and implement an integrated, cooperating set of concurrent debugging tools. The new debugging model and tool set were used in a distributed Concurrent C development environment running under the UNIX® operating system and connected by an Ethernet local area network. Actual results obtained from using the new debugging scheme and integrated debugging tool set to detect, locate, and correct software faults in distributed Concurrent C programs are also presented.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Distributed Tracing in Practice written by Austin Parker and published by O'Reilly Media. This book was released on 2020-04-13 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most applications today are distributed in some fashion. Monitoring the health and performance of these distributed architectures requires a new approach. Enter distributed tracing, a method of profiling and monitoring applications—especially those that use microservice architectures. There’s just one problem: distributed tracing can be hard. But it doesn’t have to be. With this practical guide, you’ll learn what distributed tracing is and how to use it to understand the performance and operation of your software. Key players at Lightstep walk you through instrumenting your code for tracing, collecting the data that your instrumentation produces, and turning it into useful, operational insights. If you want to start implementing distributed tracing, this book tells you what you need to know. You’ll learn: The pieces of a distributed tracing deployment: Instrumentation, data collection, and delivering value Best practices for instrumentation (the methods for generating trace data from your service) How to deal with or avoid overhead, costs, and sampling How to work with spans (the building blocks of request-based distributed traces) and choose span characteristics that lead to valuable traces Where distributed tracing is headed in the future
Download or read book Parallel Program Development for Cluster Computing written by José Cardoso Cunha and published by Nova Publishers. This book was released on 2001 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is divided into two parts, the first one covering the concepts and methodologies, and the second describing the tools and integrated environments that were developed in those projects. In this way, we hope that the reader will find the book useful not only concerning an identification of current trends in parallel program development, but also concerning their practical illustration through concrete tools and environments.
Download or read book Official Gazette of the United States Patent and Trademark Office written by United States. Patent and Trademark Office and published by . This book was released on 2000 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PART 99 written by Wilson C. H. Cheng and published by . This book was released on 2000 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Australasian Conference on Parallel and Real-Time Systems is the premier event in this research area in the Pacific. This book is the proceedings of the 6th annual event held in Melbourne in November -December 1999. The primary aim of the conference is to bring together Australasian and International researchers, who are actively involved in research on parallel and real-time systems. The topic interest to the conference include: parallel architectures and algorithms, object-oriented real-time and parallel computing, Multimedia systems, mobile computing, heterogeneous systems, computing and distributed computing.
Download or read book Advanced Methods Techniques and Applications in Modeling and Simulation written by Jong-Hyun Kim and published by Springer Science & Business Media. This book was released on 2012-10-04 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of research accomplishments in the fields of modeling, simulation, and their applications, as presented at AsiaSim 2011 (Asia Simulation Conference 2011). The conference, held in Seoul, Korea, November 16–18, was organized by ASIASIM (Federation of Asian Simulation Societies), KSS (Korea Society for Simulation), CASS (Chinese Association for System Simulation), and JSST (Japan Society for Simulation Technology). AsiaSim 2011 provided a forum for scientists, academicians, and professionals from the Asia-Pacific region and other parts of the world to share their latest exciting research findings in modeling and simulation methodologies, techniques, and their tools and applications in military, communication network, industry, and general engineering problems.
Download or read book Integrated Formal Methods written by Erika Ábrahám and published by Springer. This book was released on 2016-05-23 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th International Conference on Integrated Formal Methods, IFM 2016, held in Reykjavik, Iceland, in June 2016. The 33 papers presented in this volume were carefully reviewed and selected from 99 submissions. They were organized in topical sections named: invited contributions; program verification; probabilistic systems; concurrency; safety and liveness; model learning; SAT and SMT solving; testing; theorem proving and constraint satisfaction; case studies.
Download or read book Advanced Debugging Methods written by Raimondas Lencevicius and published by Springer Science & Business Media. This book was released on 2012-09-07 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Object relationships in modern software systems are becoming increasingly numerous and complex, and program errors due to violations of object relationships are difficult to detect. Programmers need new tools that allow them to explore objects in a large system more efficiently and to detect broken object relationships instantaneously. Such tools incorporate approaches used in such areas as data visualization, pattern matching and extraction, database querying, active databases, and rule-based programming. The query-based debugging approach developed by the author of this book is another powerful yet efficient tool to be added to the developer's tool chest. Advanced Debugging Methods presents practice and tools for debugging computer programs. This book proposes new powerful approaches that simplify the daunting task of debugging complex software systems. Although debugging has been addressed in numerous research papers, many of its methods have yet to be explored in a book-length format. This book helps to fill this gap by presenting an overview of existing debugging tools with motivating examples and case studies, as well as presenting new, state-of-the-art debugging methods. Advanced Debugging Methods will be of use to software developers looking for tools to be applied in cutting edge practice; system architects looking at the relationship between software design and debugging; tools and programming language researchers looking for new ideas in run-time tool implementation as well as detailed descriptions of advanced implementations; and university professors and graduate students who will use this book as supplementary reading for graduate courses in programming tools, language implementation, and advanced object-oriented systems. Advanced Debugging Methods is also a handy reference of currently existing debugging methodologies as well as a springboard for cutting-edge research to simplify the difficult task of debugging and to facilitate the development of more robust software systems.
Download or read book Formal Methods for Open Object Based Distributed Systems V written by Bart Jacobs and published by Springer. This book was released on 2013-04-17 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formal Methods for Open Object-Based Distributed Systems V brings together research in three important and related fields: Formal methods; Distributed systems; Object-based technology. Such a convergence is representative of recent advances in the field of distributed systems, and provides links between several scientific and technological communities. The wide scope of topics covered in this volume range in subject from UML to object-based languages and calculi and security, and in approach from specification to case studies and verification. This volume comprises the proceedings of the Fifth International Conference on Formal Methods for Open Object-Based Distributed Systems (FMOODS 2002), which was sponsored by the International Federation for Information Processing (IFIP) and held in Enschede, The Netherlands in March 2002.
Download or read book Fundamental Approaches to Software Engineering written by Marsha Chechik and published by Springer. This book was released on 2009-03-28 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th International Conference on Fundamental Approaches to Software Engineering, FASE 2009, held in York, UK, in March 2009, as part of ETAPS 2009, the European Joint Conferences on Theory and Practice of Software. The 30 revised full papers presented together with 2 tool demonstrations were carefully reviewed and selected from 123 regluar and 9 tool paper submissions. The topics addressed are model-driven development, synthesis and adaptation, modeling, testing and debugging, model analysis, patterns, security, queries and error handling, and tools (demos) and program analysis.
Download or read book Languages and Compilers for Parallel Computing written by Utpal Banerjee and published by Springer Science & Business Media. This book was released on 1994-01-28 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers selected for presentation at the Sixth Annual Workshop on Languages and Compilers for Parallel Computing. The workshop washosted by the Oregon Graduate Institute of Science and Technology. All the major research efforts in parallel languages and compilers are represented in this workshop series. The 36 papers in the volume aregrouped under nine headings: dynamic data structures, parallel languages, High Performance Fortran, loop transformation, logic and dataflow language implementations, fine grain parallelism, scalar analysis, parallelizing compilers, and analysis of parallel programs. The book represents a valuable snapshot of the state of research in the field in 1993.
Download or read book Large Scale Distributed Computing and Applications Models and Trends written by Cristea, Valentin and published by IGI Global. This book was released on 2010-05-31 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many applications follow the distributed computing paradigm, in which parts of the application are executed on different network-interconnected computers. The extension of these applications in terms of number of users or size has led to an unprecedented increase in the scale of the infrastructure that supports them. Large-Scale Distributed Computing and Applications: Models and Trends offers a coherent and realistic image of today's research results in large scale distributed systems, explains state-of-the-art technological solutions for the main issues regarding large scale distributed systems, and presents the benefits of using large scale distributed systems and the development process of scientific and commercial distributed applications.
Download or read book Predictably Dependable Computing Systems written by Brian Randell and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contributions to Hardware and Software Reliability written by P. K. Kapur and published by World Scientific. This book was released on 1999 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: With better computing facilities now available, there is an ever-increasing need to ensure that elegant theoretical results on hardware reliability are computationally available. This book discusses those aspects which have relevance to computing systems and those where numerical computation was a problem. It is also well known that nearly 70% of the cost goes into software development and hence software reliability assumes special importance. The book not only gives an extensive review of the literature on software reliability but also provides direction in developing models which are flexible and can be used in a variety of testing environments. Besides, several alternative formulations of the release time problem are discussed along with variants such as allocation of testing effort resources to different modules of the software, or the testing effort control problem. Software reliability has now emerged as an independent discipline and requires a strong partnership between computer scientists, statisticians and operational researchers. This aspect is broadly highlighted in the book.
Download or read book Software Maintenance A Management Perspective written by Phaneendra Nath Vellanky and published by Universal-Publishers. This book was released on 2007-10-23 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer systems play an important role in our society. Software drives those systems. Massive investments of time and resources are made in developing and implementing these systems. Maintenance is inevitable. It is hard and costly. Considerable resources are required to keep the systems active and dependable. We cannot maintain software unless maintainability characters are built into the products and processes. There is an urgent need to reinforce software development practices based on quality and reliability principles. Though maintenance is a mini development lifecycle, it has its own problems. Maintenance issues need corresponding tools and techniques to address them. Software professionals are key players in maintenance. While development is an art and science, maintenance is a craft. We need to develop maintenance personnel to master this craft. Technology impact is very high in systems world today. We can no longer conduct business in the way we did before. That calls for reengineering systems and software. Even reengineered software needs maintenance, soon after its implementation. We have to take business knowledge, procedures, and data into the newly reengineered world. Software maintenance people can play an important role in this migration process. Software technology is moving into global and distributed networking environments. Client/server systems and object-orientation are on their way. Massively parallel processing systems and networking resources are changing database services into corporate data warehouses. Software engineering environments, rapid application development tools are changing the way we used to develop and maintain software. Software maintenance is moving from code maintenance to design maintenance, even onto specification maintenance. Modifications today are made at specification level, regenating the software components, testing and integrating them with the system. Eventually software maintenance has to manage the evolution and evolutionary characteristics of software systems. Software professionals have to maintain not only the software, but the momentum of change in systems and software. In this study, we observe various issues, tools and techniques, and the emerging trends in software technology with particular reference to maintenance. We are not searching for specific solutions. We are identifying issues and finding ways to manage them, live with them, and control their negative impact.
