Download or read book A Mite Based Translinear Fpaa and Its Practical Implementation written by David Abramson and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: While the development of reconfigurable analog platforms is a blossoming field, the tradeoff between usability and flexibility continues to be a major barrier. Field Programmable Analog Arrays (FPAAs) built with translinear elements offer a promising solution to this problem. These FPAAs can be built to use previously developed synthesis procedures for translinear circuits. Furthermore, large-scale translinear FPAAs can be built using floating-gate transistors as both the computational elements and the reconfigurable interconnect network. Two FPAAs, built using Multiple Input Translinear Elements (MITEs), have been designed, fabricated, and tested. These devices have been programmed to implement various circuits including multipliers, squaring circuits, current splitters, and filters. In addition, synthesis, place-and-route, and programming tools have been created in order to implement a reconfigurable system where the circuits implemented are described only by equations. Supporting circuitry for interfacing with current-mode, translinear FPAAs has also been developed. This circuitry included a voltage-to-current converter, a current-to-voltage converter, and a pipelined analog-to-digital converter. The continued development of translinear FPAAs will lead to a reconfigurable analog system that allows for a large portion of the design to be abstracted away from the user.

Download or read book Proceedings of the Second International Scientific Conference Intelligent Information Technologies for Industry IITI 17 written by Ajith Abraham and published by Springer. This book was released on 2017-09-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Advances in Intelligent Systems and Computing highlights key scientific achievements and innovations in all areas of automation, informatization, computer science, and artificial intelligence. It gathers papers presented at the IITI 2017, the Second International Conference on Intelligent Information Technologies for Industry, which was held in Varna, Bulgaria on September 14–16, 2017. The conference was jointly co-organized by Technical University of Varna (Bulgaria), Technical University of Sofia (Bulgaria), VSB Technical University of Ostrava (Czech Republic) and Rostov State Transport University (Russia). The IITI 2017 brought together international researchers and industrial practitioners interested in the development and implementation of modern technologies for automation, informatization, computer science, artificial intelligence, transport and power electrical engineering. In addition to advancing both fundamental research and innovative applications, the conference is intended to establish a new dissemination platform and an international network of researchers in these fields.

Download or read book Design of a Translinear Analog Signal Processor Using Multiple input Translinear Elements written by Hank Chung-Hung Chen and published by . This book was released on 1999 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analog RF and Mixed Signal Circuit Systematic Design written by Mourad Fakhfakh and published by Springer Science & Business Media. This book was released on 2013-02-03 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the fact that in the digital domain, designers can take full benefits of IPs and design automation tools to synthesize and design very complex systems, the analog designers’ task is still considered as a ‘handcraft’, cumbersome and very time consuming process. Thus, tremendous efforts are being deployed to develop new design methodologies in the analog/RF and mixed-signal domains. This book collects 16 state-of-the-art contributions devoted to the topic of systematic design of analog, RF and mixed signal circuits. Divided in the two parts Methodologies and Techniques recent theories, synthesis techniques and design methodologies, as well as new sizing approaches in the field of robust analog and mixed signal design automation are presented for researchers and R/D engineers.

Download or read book Big Data and Visual Analytics written by Sang C. Suh and published by Springer. This book was released on 2018-01-15 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides users with cutting edge methods and technologies in the area of big data and visual analytics, as well as an insight to the big data and data analytics research conducted by world-renowned researchers in this field. The authors present comprehensive educational resources on big data and visual analytics covering state-of-the art techniques on data analytics, data and information visualization, and visual analytics. Each chapter covers specific topics related to big data and data analytics as virtual data machine, security of big data, big data applications, high performance computing cluster, and big data implementation techniques. Every chapter includes a description of an unique contribution to the area of big data and visual analytics. This book is a valuable resource for researchers and professionals working in the area of big data, data analytics, and information visualization. Advanced-level students studying computer science will also find this book helpful as a secondary textbook or reference.

Download or read book Integrated Circuits for Analog Signal Processing written by Esteban Tlelo-Cuautle and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theory, design methods and novel applications for integrated circuits for analog signal processing. The discussion covers a wide variety of active devices, active elements and amplifiers, working in voltage mode, current mode and mixed mode. This includes voltage operational amplifiers, current operational amplifiers, operational transconductance amplifiers, operational transresistance amplifiers, current conveyors, current differencing transconductance amplifiers, etc. Design methods and challenges posed by nanometer technology are discussed and applications described, including signal amplification, filtering, data acquisition systems such as neural recording, sensor conditioning such as biomedical implants, actuator conditioning, noise generators, oscillators, mixers, etc. Presents analysis and synthesis methods to generate all circuit topologies from which the designer can select the best one for the desired application; Includes design guidelines for active devices/elements with low voltage and low power constraints; Offers guidelines for selecting the right active devices/elements in the design of linear and nonlinear circuits; Discusses optimization of the active devices/elements for process and manufacturing issues of nanometer technology.

Download or read book Neuromorphic Engineering Systems and Applications written by André van Schaik and published by Frontiers Media SA. This book was released on 2015-07-05 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neuromorphic engineering has just reached its 25th year as a discipline. In the first two decades neuromorphic engineers focused on building models of sensors, such as silicon cochleas and retinas, and building blocks such as silicon neurons and synapses. These designs have honed our skills in implementing sensors and neural networks in VLSI using analog and mixed mode circuits. Over the last decade the address event representation has been used to interface devices and computers from different designers and even different groups. This facility has been essential for our ability to combine sensors, neural networks, and actuators into neuromorphic systems. More recently, several big projects have emerged to build very large scale neuromorphic systems. The Telluride Neuromorphic Engineering Workshop (since 1994) and the CapoCaccia Cognitive Neuromorphic Engineering Workshop (since 2009) have been instrumental not only in creating a strongly connected research community, but also in introducing different groups to each other’s hardware. Many neuromorphic systems are first created at one of these workshops. With this special research topic, we showcase the state-of-the-art in neuromorphic systems.

Download or read book Analysis and Synthesis of MOS Translinear Circuits written by Remco J. Wiegerink and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its roots in an idea first formulated by Barrie Gilbert in 1975. He showed how bipolar analog circuits can realize nonlinear and computational functions. This extended the analog art from linear to nonlinear applications, hence the name trans linear circuits. Not only did this new principle enable marvellous signal processing functions to be accurately implemented, but also the circuits were simple and practical. The perennial problems of analog Ie design, namely temperature sensitivity, processing spread, device nonlinearity and paracitic capacitance were solved to a large extent. Using the trans linear principle in circuit design requires changing your point of view in two ways. First, the grossly nonlinear characteristic of transistors is viewed as an asset rather than as a harmful property. Second, no longer are the signals represented by voltages, but by currents. In fact, the attendant voltage changes are distorted but, as they are very small, they are only of secondary interest. Understanding and analyzing a given trans linear circuit is fairly straightforward. But what about the converse situation: suppose you're given some nonlinear or computational function to implement? How to find a suitable translinear circuit realization? The general problem of analog circuit synthesis is a difficult one and is receiving much attention nowadays. Some years ago, I had the opportunity to investigate methods for designing bipolar trans linear circuits. It turned out that translinear networks have some unique topological properties. Using these properties it was possible to establish heuristic synthesis procedures.

Download or read book Modeling and Simulation in Scilab Scicos with ScicosLab 4 4 written by Stephen L. Campbell and published by Springer Science & Business Media. This book was released on 2009-12-21 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scilab and its Scicos block diagram graphical editor, with a special emphasis on modeling and simulation tools. The first part is a detailed Scilab tutorial, and the second is dedicated to modeling and simulation of dynamical systems in Scicos. The concepts are illustrated through numerous examples, and all code used in the book is available to the reader.

Download or read book System on Chip for Real Time Applications written by Wael Badawy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-on-Chip for Real-Time Applications will be of interest to engineers, both in industry and academia, working in the area of SoC VLSI design and application. It will also be useful to graduate and undergraduate students in electrical and computer engineering and computer science. A selected set of papers from the 2nd International Workshop on Real-Time Applications were used to form the basis of this book. It is organized into the following chapters: -Introduction; -Design Reuse; -Modeling; -Architecture; -Design Techniques; -Memory; -Circuits; -Low Power; -Interconnect and Technology; -MEMS. System-on-Chip for Real-Time Applications contains many signal processing applications and will be of particular interest to those working in that community.

Download or read book MOSFET Modeling BSIM3 User s Guide written by Yuhua Cheng and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuit simulation is essential in integrated circuit design, and the accuracy of circuit simulation depends on the accuracy of the transistor model. BSIM3v3 (BSIM for Berkeley Short-channel IGFET Model) has been selected as the first MOSFET model for standardization by the Compact Model Council, a consortium of leading companies in semiconductor and design tools. In the next few years, many fabless and integrated semiconductor companies are expected to switch from dozens of other MOSFET models to BSIM3. This will require many device engineers and most circuit designers to learn the basics of BSIM3. MOSFET Modeling & BSIM3 User's Guide explains the detailed physical effects that are important in modeling MOSFETs, and presents the derivations of compact model expressions so that users can understand the physical meaning of the model equations and parameters. It is the first book devoted to BSIM3. It treats the BSIM3 model in detail as used in digital, analog and RF circuit design. It covers the complete set of models, i.e., I-V model, capacitance model, noise model, parasitics model, substrate current model, temperature effect model and non quasi-static model. MOSFET Modeling & BSIM3 User's Guide not only addresses the device modeling issues but also provides a user's guide to the device or circuit design engineers who use the BSIM3 model in digital/analog circuit design, RF modeling, statistical modeling, and technology prediction. This book is written for circuit designers and device engineers, as well as device scientists worldwide. It is also suitable as a reference for graduate courses and courses in circuit design or device modelling. Furthermore, it can be used as a textbook for industry courses devoted to BSIM3. MOSFET Modeling & BSIM3 User's Guide is comprehensive and practical. It is balanced between the background information and advanced discussion of BSIM3. It is helpful to experts and students alike.

Download or read book MOSFET Modeling with SPICE written by Daniel Foty and published by Prentice Hall. This book was released on 1997 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will help CMOS circuit designers make the best possible use of SPICE models, and will prepare them for new models that may soon be introduced. Introduces SPICE modeling and its use in CMOS circuit design. Presents the formalism of model building and the semiconductor physics of MOS structures. Covers each important SPICE model, showing how to choose the appropriate model. Discusses the popular HSPICE Level 28, as well as Levels 1-3, BSIM 1-3, and MOS Model 9. Presents techniques for accounting for systematic process variations. Describes new model candidates, including the Power-Lane Model, the PCIM Model, and the EKV Model. Includes extensive examples throughout. Practicing engineers and scientists in the semiconductor industry; engineering faculty and students.

Download or read book ANALOG MOS INTEGRATED CIRCUITS FOR SIGNAL PROCESSING written by Roubik Gregorian and published by . This book was released on 2008-09-01 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: · Engineers· Managers· Technicians About The Book: The book describes the operating principles of analog MOS integrated circuits and how to design and use such circuits. The initial section explores general properties of analog MOS integrated circuits and the math and physics background required. The remainder of the book is devoted to the design of circuits. It includes such devices as switched-capacitor filters, analog-to-digital and digital-to-analog converters, amplifiers, modulators, oscillators, and others. Tables and numerical design examples clarify the step-by-step processes involved. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Download or read book VLSI Design written by Esteban Tlelo-Cuautle and published by BoD – Books on Demand. This book was released on 2012-01-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides some recent advances in design nanometer VLSI chips. The selected topics try to present some open problems and challenges with important topics ranging from design tools, new post-silicon devices, GPU-based parallel computing, emerging 3D integration, and antenna design. The book consists of two parts, with chapters such as: VLSI design for multi-sensor smart systems on a chip, Three-dimensional integrated circuits design for thousand-core processors, Parallel symbolic analysis of large analog circuits on GPU platforms, Algorithms for CAD tools VLSI design, A multilevel memetic algorithm for large SAT-encoded problems, etc.

Download or read book Selected Topics in RF Analog and Mixed Signal Circuits and Systems written by Kiran Gunnam and published by CRC Press. This book was released on 2022-09-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS process technology progress has led to a revolution towards new and innovative integrated circuits and systems. This trend is still moving forward for applications ranging from high-speed wireless and wireline data transfer down to ultra-low-power mobile applications for more interconnected world. The high performance analog and RF circuits and systems are at the heart of all these developments. Selected Topics in RF, Analog and Mixed Signal Circuits and Systems provides an overview and the state of the art developments on several selected topics in RF, analog and mixed signal circuits and system. The topics include ADC conversion and equalization for high-speed links, clock and data recovery for high speed wireline transmission with speeds in several Gb/s, signal generation for terahertz application, oscillator phase noise fundamentals and analog/digital PLL overview. Topics covered in the book include:Overview of Oscillator Phase NoiseClock and Data Recovery in High-Speed Wireline CommunicationPhase Lock Loop Design TechniquesTerahertz and mm-Wave Signal Generation, Synthesis and Amplification: Reaching the Fundamental LimitsEqualization and A/D conversion for high-speed links

Download or read book Fundamentals of Microelectronics written by Behzad Razavi and published by John Wiley & Sons. This book was released on 2013-04-08 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Microelectronics, 2nd Edition is designed to build a strong foundation in both design and analysis of electronic circuits this text offers conceptual understanding and mastery of the material by using modern examples to motivate and prepare readers for advanced courses and their careers. The books unique problem-solving framework enables readers to deconstruct complex problems into components that they are familiar with which builds the confidence and intuitive skills needed for success.

Download or read book Biomedical Circuits and Systems written by Eugenio Culurciello and published by Lulu.com. This book was released on 2013-09-09 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated circuit design for biomedical applications requires an interdisciplinary background, ranging from electrical engineering to material engineering to computer science. This book is written to help build the foundation for researchers, engineers, and students to further develop their interest and knowledge in this field. This book provides an overview of various biosensors by introducing fundamental building blocks for integrated biomedical systems. State-of-the-art projects for various applications and experience in developing these systems are explained in detail. Future design trends in this field is also discussed in this book.