Download or read book Handbook of Hardware Software Codesign written by Soonhoi Ha and published by Springer. This book was released on 2017-10-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents fundamental knowledge on the hardware/software (HW/SW) codesign methodology. Contributing expert authors look at key techniques in the design flow as well as selected codesign tools and design environments, building on basic knowledge to consider the latest techniques. The book enables readers to gain real benefits from the HW/SW codesign methodology through explanations and case studies which demonstrate its usefulness. Readers are invited to follow the progress of design techniques through this work, which assists readers in following current research directions and learning about state-of-the-art techniques. Students and researchers will appreciate the wide spectrum of subjects that belong to the design methodology from this handbook.
Download or read book A Practical Introduction to Hardware Software Codesign written by Patrick R. Schaumont and published by Springer Science & Business Media. This book was released on 2010-09-09 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a practical book for computer engineers who want to understand or implement hardware/software systems. It focuses on problems that require one to combine hardware design with software design – such problems can be solved with hardware/software codesign. When used properly, hardware/software co- sign works better than hardware design or software design alone: it can improve the overall performance of digital systems, and it can shorten their design time. Hardware/software codesign can help a designer to make trade-offs between the ?exibility and the performanceof a digital system. To achieve this, a designer needs to combine two radically different ways of design: the sequential way of dec- position in time, using software, with the parallel way of decomposition in space, using hardware. Intended Audience This book assumes that you have a basic understandingof hardware that you are - miliar with standard digital hardware componentssuch as registers, logic gates, and components such as multiplexers and arithmetic operators. The book also assumes that you know how to write a program in C. These topics are usually covered in an introductory course on computer engineering or in a combination of courses on digital design and software engineering.
Download or read book Hardware Software Co Design of Embedded Systems written by F. Balarin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are informally defined as a collection of programmable parts surrounded by ASICs and other standard components, that interact continuously with an environment through sensors and actuators. The programmable parts include micro-controllers and Digital Signal Processors (DSPs). Embedded systems are often used in life-critical situations, where reliability and safety are more important criteria than performance. Today, embedded systems are designed with an ad hoc approach that is heavily based on earlier experience with similar products and on manual design. Use of higher-level languages such as C helps structure the design somewhat, but with increasing complexity it is not sufficient. Formal verification and automatic synthesis of implementations are the surest ways to guarantee safety. Thus, the POLIS system which is a co-design environment for embedded systems is based on a formal model of computation. POLIS was initiated in 1988 as a research project at the University of California at Berkeley and, over the years, grew into a full design methodology with a software system supporting it. Hardware-Software Co-Design of Embedded Systems: The POLIS Approach is intended to give a complete overview of the POLIS system including its formal and algorithmic aspects. Hardware-Software Co-Design of Embedded Systems: The POLIS Approach will be of interest to embedded system designers (automotive electronics, consumer electronics and telecommunications), micro-controller designers, CAD developers and students.
Download or read book Readings in Hardware Software Co Design written by Giovanni De Micheli and published by Morgan Kaufmann. This book was released on 2002 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title serves as an introduction ans reference for the field, with the papers that have shaped the hardware/software co-design since its inception in the early 90s.
Download or read book The Codesign of Embedded Systems A Unified Hardware Software Representation written by Sanjaya Kumar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current practice dictates the separation of the hardware and software development paths early in the design cycle. These paths remain independent with very little interaction occurring between them until system integration. In particular, hardware is often specified without fully appreciating the computational requirements of the software. Also, software development does not influence hardware development and does not track changes made during the hardware design phase. Thus, the ability to explore hardware/software tradeoffs is restricted, such as the movement of functionality from the software domain to the hardware domain (and vice-versa) or the modification of the hardware/software interface. As a result, problems that are encountered during system integration may require modification of the software and/or hardware, resulting in potentially significant cost increases and schedule overruns. To address the problems described above, a cooperative design approach, one that utilizes a unified view of hardware and software, is described. This approach is called hardware/software codesign. The Codesign of Embedded Systems develops several fundamental hardware/software codesign concepts and a methodology that supports them. A unified representation, referred to as a decomposition graph, is presented which can be used to describe hardware or software using either functional abstractions or data abstractions. Using a unified representation based on functional abstractions, an abstract hardware/software model has been implemented in a common simulation environment called ADEPT (Advanced Design Environment Prototyping Tool). This model permits early hardware/software evaluation and tradeoff exploration. Techniques have been developed which support the identification of software bottlenecks and the evaluation of design alternatives with respect to multiple metrics. The application of the model is demonstrated on several examples. A unified representation based on data abstractions is also explored. This work leads to investigations regarding the application of object-oriented techniques to hardware design. The Codesign of Embedded Systems: A Unified Hardware/Software Representation describes a novel approach to a topic of immense importance to CAD researchers and designers alike.
Download or read book A Methodology for Hardware software Codesign written by Myron Decker King and published by . This book was released on 2013 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special purpose hardware is vital to embedded systems as it can simultaneously improve performance while reducing power consumption. The integration of special purpose hardware into applications running in software is difficult for a number of reasons. Some of the difficulty is due to the difference between the models used to program hardware and software, but great effort is also required to coordinate the simultaneous execution of the application running on the microprocessor with the accelerated kernel(s) running in hardware. To further compound the problem, current design methodologies for embedded applications require an early determination of the design partitioning which allows hardware and software to be developed simultaneously, each adhering to a rigid interface contract. This approach is problematic because often a good hardware-software decomposition is not known until deep into the design process. Fixed interfaces and the burden of reimplementation prevent the migration of functionality motivated by repartitioning. This thesis presents a two-part solution to the integration of special purpose hardware into applications running in software. The first part addresses the problem of generating infrastructure for hardware-accelerated applications. We present a methodology in which the application is represented as a dataflow graph and the computation at each node is specified for execution either in software or as specialized hardware using the programmer's language of choice. An interface compiler as been implemented which takes as input the FIFO edges of the graph and generates code to connect all the different parts of the program, including those which communicate across the hardware/software boundary. This methodology, which we demonstrate on an FPGA platform, enables programmers to effectively exploit hardware acceleration without ever leaving the application space. The second part of this thesis presents an implementation of the Bluespec Codesign Language (BCL) to address the difficulty of experimenting with hardware/software partitioning alternatives. Based on guarded atomic actions, BCL can be used to specify both hardware and low-level software. Based on Bluespec SystemVerilog (BSV) for which a hardware compiler by Bluespec Inc. is commercially available, BCL has been augmented with extensions to support more efficient software generation. In BCL, the programmer specifies the entire design, including the partitioning, allowing the compiler to synthesize efficient software and hardware, along with transactors for communication between the partitions. The benefit of using a single language to express the entire design is that a programmer can easily experiment with many different hardware/software decompositions without needing to re-write the application code. Used together, the BCL and interface compilers represent a comprehensive solution to the task of integrating specialized hardware into an application.
Download or read book Handbook of Hardware Software Codesign written by Soonhoi Ha and published by Springer. This book was released on 2018-02-25 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents fundamental knowledge on the hardware/software (HW/SW) codesign methodology. Contributing expert authors look at key techniques in the design flow as well as selected codesign tools and design environments, building on basic knowledge to consider the latest techniques. The book enables readers to gain real benefits from the HW/SW codesign methodology through explanations and case studies which demonstrate its usefulness. Readers are invited to follow the progress of design techniques through this work, which assists readers in following current research directions and learning about state-of-the-art techniques. Students and researchers will appreciate the wide spectrum of subjects that belong to the design methodology from this handbook.
Download or read book A New Methodology for System Level Hardware software Codesign written by Mara Tanelli and published by . This book was released on 2003 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hardware Software Co Design for Data Flow Dominated Embedded Systems written by Ralf Niemann and published by Springer Science & Business Media. This book was released on 1998-10-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces different tasks of hardware/software co-design, including system specification, hardware/software partitioning, co-synthesis, and co-simulation. Summarizes and classifies co-design tools and methods for these tasks, and presents the co-design tool COOL, useful for solving co-design tasks for the class of data-flow dominated embedded systems. Primary emphasis is on hardware/software partitioning and the co-synthesis phase and their coupling. A mathematical formulation of the hardware/software partitioning problem is given, and several novel approaches are presented and compared for solving the partitioning problem. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book System Level Hardware Software Co Design written by Joris van den Hurk and published by Springer Science & Business Media. This book was released on 1997-12-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hierarchical design methods were originally introduced for the design of digital ICs, and they appeared to provide for significant advances in design productivity, Time-to-Market, and first-time right design. These concepts have gained increasing importance in the semiconductor industry in recent years. In the course of time, the supportive quality of hierarchical methods and their advantages were confirmed. System Level Hardware/Software Co-design: An Industrial Approach demonstrates the applicability of hierarchical methods to hardware / software codesign, and mixed analogue / digital design following a similar approach. Hierarchical design methods provide for high levels of design support, both in a qualitative and a quantitative sense. In the qualitative sense, the presented methods support all phases in the product life cycle of electronic products, ranging from requirements analysis to application support. Hierarchical methods furthermore allow for efficient digital hardware design, hardware / software codesign, and mixed analogue / digital design, on the basis of commercially available formalisms and design tools. In the quantitative sense, hierarchical methods have prompted a substantial increase in design productivity. System Level Hardware/Software Co-design: An Industrial Approach reports on a six year study during which time the number of square millimeters of normalized complexity an individual designer contributed every week rose by more than a factor of five. Hierarchical methods therefore enabled designers to keep track of the ever increasing design complexity, while effectively reducing the number of design iterations in the form of redesigns. System Level Hardware/Software Co-design: An Industrial Approach is the first book to provide a comprehensive, coherent system design methodology that has been proven to increase productivity in industrial practice. The book will be of interest to all managers, designers and researchers working in the semiconductor industry.
Download or read book Hardware Software Co Design and Co Verification written by Jean-Michel Bergé and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Co-Design is the set of emerging techniques which allows for the simultaneous design of Hardware and Software. In many cases where the application is very demanding in terms of various performances (time, surface, power consumption), trade-offs between dedicated hardware and dedicated software are becoming increasingly difficult to decide upon in the early stages of a design. Verification techniques - such as simulation or proof techniques - that have proven necessary in the hardware design must be dramatically adapted to the simultaneous verification of Software and Hardware. Describing the latest tools available for both Co-Design and Co-Verification of systems, Hardware/Software Co-Design and Co-Verification offers a complete look at this evolving set of procedures for CAD environments. The book considers all trade-offs that have to be made when co-designing a system. Several models are presented for determining the optimum solution to any co-design problem, including partitioning, architecture synthesis and code generation. When deciding on trade-offs, one of the main factors to be considered is the flow of communication, especially to and from the outside world. This involves the modeling of communication protocols. An approach to the synthesis of interface circuits in the context of co-design is presented. Other chapters present a co-design oriented flexible component data-base and retrieval methods; a case study of an ethernet bridge, designed using LOTOS and co-design methodologies and finally a programmable user interface based on monitors. Hardware/Software Co-Design and Co-Verification will help designers and researchers to understand these latest techniques in system design and as such will be of interest to all involved in embedded system design.
Download or read book The Codesign of Embedded Systems A Unified Hardware Software Representation written by Sanjaya Kumar and published by Springer. This book was released on 1995-11-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current practice dictates the separation of the hardware and software development paths early in the design cycle. These paths remain independent with very little interaction occurring between them until system integration. In particular, hardware is often specified without fully appreciating the computational requirements of the software. Also, software development does not influence hardware development and does not track changes made during the hardware design phase. Thus, the ability to explore hardware/software tradeoffs is restricted, such as the movement of functionality from the software domain to the hardware domain (and vice-versa) or the modification of the hardware/software interface. As a result, problems that are encountered during system integration may require modification of the software and/or hardware, resulting in potentially significant cost increases and schedule overruns. To address the problems described above, a cooperative design approach, one that utilizes a unified view of hardware and software, is described. This approach is called hardware/software codesign. The Codesign of Embedded Systems develops several fundamental hardware/software codesign concepts and a methodology that supports them. A unified representation, referred to as a decomposition graph, is presented which can be used to describe hardware or software using either functional abstractions or data abstractions. Using a unified representation based on functional abstractions, an abstract hardware/software model has been implemented in a common simulation environment called ADEPT (Advanced Design Environment Prototyping Tool). This model permits early hardware/software evaluation and tradeoff exploration. Techniques have been developed which support the identification of software bottlenecks and the evaluation of design alternatives with respect to multiple metrics. The application of the model is demonstrated on several examples. A unified representation based on data abstractions is also explored. This work leads to investigations regarding the application of object-oriented techniques to hardware design. The Codesign of Embedded Systems: A Unified Hardware/Software Representation describes a novel approach to a topic of immense importance to CAD researchers and designers alike.
Download or read book System Level Hardware Software Co Design written by Joris van den Hurk and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hierarchical design methods were originally introduced for the design of digital ICs, and they appeared to provide for significant advances in design productivity, Time-to-Market, and first-time right design. These concepts have gained increasing importance in the semiconductor industry in recent years. In the course of time, the supportive quality of hierarchical methods and their advantages were confirmed. System Level Hardware/Software Co-design: An Industrial Approach demonstrates the applicability of hierarchical methods to hardware / software codesign, and mixed analogue / digital design following a similar approach. Hierarchical design methods provide for high levels of design support, both in a qualitative and a quantitative sense. In the qualitative sense, the presented methods support all phases in the product life cycle of electronic products, ranging from requirements analysis to application support. Hierarchical methods furthermore allow for efficient digital hardware design, hardware / software codesign, and mixed analogue / digital design, on the basis of commercially available formalisms and design tools. In the quantitative sense, hierarchical methods have prompted a substantial increase in design productivity. System Level Hardware/Software Co-design: An Industrial Approach reports on a six year study during which time the number of square millimeters of normalized complexity an individual designer contributed every week rose by more than a factor of five. Hierarchical methods therefore enabled designers to keep track of the ever increasing design complexity, while effectively reducing the number of design iterations in the form of redesigns. System Level Hardware/Software Co-design: An Industrial Approach is the first book to provide a comprehensive, coherent system design methodology that has been proven to increase productivity in industrial practice. The book will be of interest to all managers, designers and researchers working in the semiconductor industry.
Download or read book Hardware Software Co Design written by Jørgen Staunstrup and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Hardware-Software Co-Design presents a number of issues of fundamental importance for the design of integrated hardware software products such as embedded, communication, and multimedia systems. This book is a comprehensive introduction to the fundamentals of hardware/software co-design. Co-design is still a new field but one which has substantially matured over the past few years. This book, written by leading international experts, covers all the major topics including: fundamental issues in co-design; hardware/software co-synthesis algorithms; prototyping and emulation; target architectures; compiler techniques; specification and verification; system-level specification. Special chapters describe in detail several leading-edge co-design systems including Cosyma, LYCOS, and Cosmos. Introduction to Hardware-Software Co-Design contains sufficient material for use by teachers and students in an advanced course of hardware/software co-design. It also contains extensive explanation of the fundamental concepts of the subject and the necessary background to bring practitioners up-to-date on this increasingly important topic.
Download or read book Reconfigurable Computing written by Joao Cardoso and published by Springer Science & Business Media. This book was released on 2011-08-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of modern embedded systems increases, it becomes less practical to design monolithic processing platforms. As a result, reconfigurable computing is being adopted widely for more flexible design. Reconfigurable Computers offer the spatial parallelism and fine-grained customizability of application-specific circuits with the postfabrication programmability of software. To make the most of this unique combination of performance and flexibility, designers need to be aware of both hardware and software issues. FPGA users must think not only about the gates needed to perform a computation but also about the software flow that supports the design process. The goal of this book is to help designers become comfortable with these issues, and thus be able to exploit the vast opportunities possible with reconfigurable logic.
Download or read book Proceedings of the Sixth International Workshop on Hardware Software Co Design CODES CASHE 98 written by IEEE Computer Society and published by I E E E. This book was released on 1998 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text on hardware and software co-design covers such topics as: system-level modelling; partitioning; communication and interface synthesis; co-simulation; scheduling; case studies; system on chip; and system level modelling.
Download or read book A Hardware software Codesign Methodology for Packet Processing Systems written by Tushar Gohad and published by . This book was released on 2005 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
