Download or read book Journal of Rehabilitation Research Development written by and published by . This book was released on 2011 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Trends and Applications in Artificial Intelligence written by Fausto Pedro García Márquez and published by Springer Nature. This book was released on with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dielectric Elastomers as Electromechanical Transducers written by Federico Carpi and published by Elsevier. This book was released on 2011-09-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Elastomers as Electromechanical Transducers provides a comprehensive and updated insight into dielectric elastomers; one of the most promising classes of polymer-based smart materials and technologies. This technology can be used in a very broad range of applications, from robotics and automation to the biomedical field. The need for improved transducer performance has resulted in considerable efforts towards the development of devices relying on materials with intrinsic transduction properties. These materials, often termed as "smart or "intelligent, include improved piezoelectrics and magnetostrictive or shape-memory materials. Emerging electromechanical transduction technologies, based on so-called ElectroActive Polymers (EAP), have gained considerable attention. EAP offer the potential for performance exceeding other smart materials, while retaining the cost and versatility inherent to polymer materials. Within the EAP family, "dielectric elastomers, are of particular interest as they show good overall performance, simplicity of structure and robustness. Dielectric elastomer transducers are rapidly emerging as high-performance "pseudo-muscular actuators, useful for different kinds of tasks. Further, in addition to actuation, dielectric elastomers have also been shown to offer unique possibilities for improved generator and sensing devices. Dielectric elastomer transduction is enabling an enormous range of new applications that were precluded to any other EAP or smart-material technology until recently. This book provides a comprehensive and updated insight into dielectric elastomer transduction, covering all its fundamental aspects. The book deals with transduction principles, basic materials properties, design of efficient device architectures, material and device modelling, along with applications. - Concise and comprehensive treatment for practitioners and academics - Guides the reader through the latest developments in electroactive-polymer-based technology - Designed for ease of use with sections on fundamentals, materials, devices, models and applications
Download or read book Orthotics and Prosthetics in Rehabilitation written by Michelle M. Lusardi and published by Butterworth-Heinemann. This book was released on 2007 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether you are a student or a clinician, if you work with patients with neuromuscular and musculoskeletal impairments, you will find this text supplies a strong foundation in and appreciation for the field of orthotics and prosthetics that will give you the critical skills you need when working with this unique client population.
Download or read book Advances in Engineering Materials written by Bhupendra Prakash Sharma and published by Springer Nature. This book was released on 2021-04-16 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). This book, in particular, focuses on characterizing materials using novel techniques. It covers a variety of advanced materials, viz. composites, coatings, nanomaterials, materials for fuel cells, biomaterials among others. The book also discusses advanced characterization techniques like X-ray photoelectron, UV spectroscopy, scanning electron, atomic power, transmission electron and laser confocal scanning fluorescence microscopy, and gel electrophoresis chromatography. This book gives the readers an insight into advanced material processes and characterizations with special emphasis on nanotechnology.
Download or read book Rehabilitation R D Progress Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Full Stride written by Victoria Tepe and published by Springer. This book was released on 2017-09-22 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ground-breaking title begins with an introductory overview of the Lower Extremity Gait Systems (LEGS) project, identifying concerns and observations as context for the reader to consider topics and challenges detailed in later chapters. Next are chapters that explore relevant military and civilian needs, and an essential historical context of the capabilities and limitations of contemporary prosthetics. The section concludes with an overview of essential components used in passive and active lower limb prosthetics, including sockets, foot, ankle, and knee systems, as well as emerging bionic systems. A second section considers research and development in orthotics, synthetic and biological materials, volitional control, and wearable robotics (also known as exoskeletons). Finally, expert authors explore advanced science and emerging medical perspectives in research related to limb salvage, osseointegration, limb transplantation, and tissue engineering. Designed for medical practitioners, engineers, students, and researchers who use or develop prosthetic technology for civilian or military amputees, Full Stride: Advancing the State of the Art in Lower Extremity Gait Systems will be of great interest to trauma specialists, orthopedists, rehabilitation specialists, nursing staff and physical therapists, as well as researchers and scientists who specialize in fields that shape and inform advanced prosthetic device development such as materials sciences, engineering (electrical, mechanical, biomedical), robotics, and human physiology.
Download or read book Ergonomics for Improved Productivity written by Mohammad Muzammil and published by Springer Nature. This book was released on 2021-03-23 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: p="" This highly informative and carefully presented book focuses on the fields of ergonomics/human factors and discusses the future of the community vis-à-vis health problems, productivity, aging, etc. Ergonomic intercession must be seen in light of its effect on productivity because ergonomic solutions will improve productivity as the reduction of environmental stressors, awkward postures and efforts lead to a reduction in task execution time. The book provides promising evidence that the field of ergonomics continues to thrive and develop deeper insights into how work environments, products and systems can be developed to meet needs, demands and limitations of humans and how they can support productivity improvements. Some of the themes covered are anthropometry and workplace design, biomechanics and modelling in ergonomics, cognitive and environmental ergonomics, ergonomic intervention and productivity, ergonomics in transport, mining, agriculture and forestry, health systems, work physiology and sports ergonomics, etc. This book is beneficial to academicians, policymakers and the industry alike. ^
Download or read book Computational Biomechanics of the Musculoskeletal System written by Ming Zhang and published by CRC Press. This book was released on 2014-09-11 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational biomechanics is an emerging research field that seeks to understand the complex biomechanical behaviors of normal and pathological human joints to come up with new methods of orthopedic treatment and rehabilitation.Computational Biomechanics of the Musculoskeletal System collects the latest research and cutting-edge techniques used in
Download or read book Proceedings of the Annual Conference written by RESNA (Association). Conference and published by . This book was released on 1995 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Arthrogryposis written by Lynn T. Staheli and published by Cambridge University Press. This book was released on 1998-04-28 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term arthrogryposis describes a range of congenital contractures that lead to childhood deformities. It encompasses a number of syndromes and sporadic deformities that are rare individually but collectively are not uncommon. Yet, the existing medical literature on arthrogryposis is sparse and often confusing. The aim of this book is to provide individuals affected with arthrogryposis, their families, and health care professionals with a helpful guide to better understand the condition and its therapy. With this goal in mind, the editors have taken great care to ensure that the presentation of complex clinical information is at once scientifically accurate, patient oriented, and accessible to readers without a medical background. The book is authored primarily by members of the medical staff of the Arthrogryposis Clinic at Children's Hospital and Medical Center in Seattle, Washington, one of the leading teams in the management of the condition, and will be an invaluable resource for both health care professionals and families of affected individuals.
Download or read book Orthopaedic Biomechanics written by Beth A. Winkelstein and published by CRC Press. This book was released on 2012-12-18 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the strong current attention of orthopaedic, biomechanical, and biomedical engineering research on translational capabilities for the diagnosis, prevention, and treatment of clinical disease states, the need for reviews of the state-of-art and current needs in orthopaedics is very timely. Orthopaedic Biomechanics provides an in-depth review of the current knowledge of orthopaedic biomechanics across all tissues in the musculoskeletal system, at all size scales, and with direct relevance to engineering and clinical applications. Discussing the relationship between mechanical loading, function, and biological performance, it first reviews basic structure-function relationships for most major orthopedic tissue types followed by the most-relevant structures of the body. It then addresses multiscale modeling and biologic considerations. It concludes with a look at applications of biomechanics, focusing on recent advances in theory, technology and applied engineering approaches. With contributions from leaders in the field, the book presents state-of-the-art findings, techniques, and perspectives. Much of orthopaedic, biomechanical, and biomedical engineering research is directed at the translational capabilities for the "real world". Addressing this from the perspective of diagnostics, prevention, and treatment in orthopaedic biomechanics, the book supplies novel perspectives for the interdisciplinary approaches required to translate orthopaedic biomechanics to today’s real world.
Download or read book Innovations in Biomedical Engineering written by Marek Gzik and published by Springer Nature. This book was released on 2022-05-31 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest developments in the field of biomedical engineering and includes practical solutions and strictly scientific considerations. The development of new methods of treatment, advanced diagnostics or personalized rehabilitation requires close cooperation of experts from many fields, including, among others, medicine, biotechnology and finally biomedical engineering. The latter, combining many fields of science, such as computer science, materials science, biomechanics, electronics not only enables the development and production of modern medical equipment, but also participates in the development of new directions and methods of treatment. The presented monograph is a collection of scientific papers on the use of engineering methods in medicine. The topics of the work include both practical solutions and strictly scientific considerations expanding knowledge about the functioning of the human body. We believe that the presented works will have an impact on the development of the field of science, which is biomedical engineering, constituting a contribution to the discussion on the directions of development of cooperation between doctors, physiotherapists and engineers. We would also like to thank all the people who contributed to the creation of this monograph—both the authors of all the works and those involved in technical works.
Download or read book Recent Advances in Mechanical Engineering written by Sanjay Yadav and published by Springer Nature. This book was released on with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gait Analysis written by Jacquelin Perry and published by CRC Press. This book was released on 2024-06-01 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extensive and ground-breaking work of Dr. Jacquelin Perry is encompassed and detailed in the world renowned text, Gait Analysis: Normal and Pathological Function. The medical, healthcare, and rehabilitation professions key text for over 18 years on gait.... Now available in a much anticipated New Second Edition Dr. Jacquelin Perry is joined by Dr. Judith Burnfield to present today's latest research findings on human gait. Gait Analysis, Second Edition has been updated and expanded to focus on current research, more sophisticated methods, and the latest equipment available to analyze gait. What is New: • A new chapter covering running • Synergy of motion between the two limbs • A new chapter covering pediatrics • A new chapter covering stair negotiation • New and updated clinical examples • A section on power inside each chapter covering normal gait • New methods and equipment to analyze gait This Second Edition to Gait Analysis offers a re-organization of the chapters and presentation of material in a more user-friendly, yet comprehensive format. Essential information is provided describing gait functions, and clinical examples to identify and interpret gait deviations. Learning is further reinforced with images and photographs. Features: • Six sections cover the fundamentals, normal gait, pathological gait, clinical considerations, advanced locomotor functions, and gait analysis systems • Clinical significance of the most common pathological gait patterns • Over 470 illustrations and photographs, as well as 40 tables • Patient examples to illustrate elements of normal and pathological gait Tens of thousands of orthopedic, orthotic and prosthetic, physical therapy, and other rehabilitation professionals have kept a copy of Gait Analysis by their side for over 18 years...join the thousands more who will bring the Second Edition into their clinics, classrooms, and personal collections.
Download or read book Computational Biomechanics of the Musculoskeletal System written by Ming Zhang and published by CRC Press. This book was released on 2014-09-11 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational biomechanics is an emerging research field that seeks to understand the complex biomechanical behaviors of normal and pathological human joints to come up with new methods of orthopedic treatment and rehabilitation. Computational Biomechanics of the Musculoskeletal System collects the latest research and cutting-edge techniques used in computational biomechanics, focusing on orthopedic and rehabilitation engineering applications. The book covers state-of-the-art techniques and the latest research related to computational biomechanics, in particular finite element analysis and its potential applications in orthopedics and rehabilitation engineering. It offers a glimpse into the exciting potentials for computational modeling in medical research and biomechanical simulation. The book is organized according to anatomical location—foot and ankle, knee, hip, spine, and head and teeth. Each chapter details the scientific questions/medical problems addressed by modeling, basic anatomy of the body part, computational model development and techniques used, related experimental studies for model setup and validation, and clinical applications. Plenty of useful biomechanical information is provided for a variety of applications, especially for the optimal design of body support devices and prosthetic implants. This book is an excellent resource for engineering students and young researchers in bioengineering. Clinicians involved in orthopedics and rehabilitation engineering may find this work to be both informative and highly relevant to their clinical practice.
