Download or read book A Method for Automated Basic Engineering of Intelligent Electronic Devices written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Automation and Systems Engineering written by Sio-Iong Ao and published by Springer Science & Business Media. This book was released on 2011-08-23 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent systems are required to facilitate the use of information provided by the internet and other computer based technologies. This book describes the state-of-the-art in Intelligent Automation and Systems Engineering. Topics covered include Intelligent decision making, Automation, Robotics, Expert systems, Fuzzy systems, Knowledge-based systems, Knowledge extraction, Large database management, Data analysis tools, Computational biology, Optimization algorithms, Experimental designs, Complex system identification, Computational modeling, Systems simulation, Decision modeling, and industrial applications.

Download or read book Digital Twin Enabled Smart Control Engineering written by Jairo Viola and published by Springer Nature. This book was released on 2023-03-13 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a novel design framework for the development of Digital Twin (DT) models for process- and motion-control applications. It is based on system-data acquisition using cutting-edge computing technologies, modelling of physical-system behavior through detailed simultaneous simulation of different aspects of the system, and optimal dynamic behavior-matching of the process. The design framework is enhanced with real-time data analytics to improve the performance of the DT’s behavior-matching with the real system or physical twin. The methods of creating a DT detailed in Digital-Twin-Enabled Smart Control Engineering make possible the study of a system for real-time controller tuning and fault detection. They also facilitate life-cycle analysis for multiple critical and dangerous conditions that cannot be explored in the corresponding real system or physical twin. The authors show how a DT can be exploited to enable self-optimizing capabilities in feedback control systems. The DT framework and the control-performance assessment, fault diagnosis and prognosis, remaining-useful-life analysis, and self-optimizing control abilities it allows are validated with both process- and motion-control systems and their DTs. Supporting MATLAB-based material for a case study and an expanded introduction to the basic elements of DTs can be accessed on an associated website. This book helps university researchers from many areas of engineering to develop new tools for control design and reliability and life-cycle assessment and helps practicing engineers working with robotic, manufacturing and processing, and mechatronic systems to maintain and develop the mechanical tools they use.

Download or read book Applications of Intelligent Control to Engineering Systems written by Kimon P. Valavanis and published by Springer Science & Business Media. This book was released on 2009-06-11 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the work of top scientists in the field of intelligent control and its applications, prognostics, diagnostics, condition based maintenance and unmanned systems. It includes results, and presents how theory is applied to solve real problems.

Download or read book Intelligent Electronic Devices written by Teen-Hang Meen and published by . This book was released on 2020 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a modern technological society, electronic engineering and design innovations are both academic and practical engineering fields that involve systematic technological materialization through scientific principles and engineering designs. Engineers and designers must work together with a variety of other professionals in their quest to find systems solutions to complex problems. Rapid advances in science and technology have broadened the horizons of engineering while simultaneously creating a multitude of challenging problems in every aspect of modern life. Current research is interdisciplinary in nature, reflecting a combination of concepts and methods that often span several areas of mechanics, mathematics, electrical engineering, control engineering, and other scientific disciplines. In addition, the 2nd IEEE International Conference on Knowledge Innovation and Invention 2019 (IEEE ICKII 2019) was held in Seoul, South Korea, on 12-15 July, 2019. This book, “Intelligent Electronic Devices”, includes 13 excellent papers form 260 papers presented in this conference about intelligent electronic devices. The main goals of this book were to encourage scientists to publish their experimental and theoretical results in as much detail as possible and to provide new scientific knowledge relevant to the topics of electronics.

Download or read book Artificial Intelligence And Automation written by Nikolas G Bourbakis and published by World Scientific. This book was released on 1998-05-05 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents:A New Way to Acquire Knowledge (H-Y Wang)An SPN Knowledge Representation Scheme (J Gattiker & N Bourbakis)On the Deep Structures of Word Problems and Their Construction (F Gomez)Resolving Conflicts in Inheritance Reasoning with Statistical Approach (C W Lee)Integrating High and Low Level Computer Vision for Scene Understanding (R Malik & S So)The Evolution of Commercial AI Tools: The First Decade (F Hayes-Roth)Reengineering: The AI Generation — Billions on the Table (J S Minor Jr)An Intelligent Tool for Discovering Data Dependencies in Relational DBS (P Gavaskar & F Golshani)A Case-Based Reasoning (CBR) Tool to Assist Traffic Flow (B Das & S Bayles)A Study of Financial Expert System Based on Flops (T Kaneko & K Takenaka)An Associative Data Parallel Compilation Model for Tight Integration of High Performance Knowledge Retrieval and Computation (A K Bansal)Software Automation: From Silly to Intelligent (J-F Xu et al.)Software Engineering Using Artificial Intelligence: The Knowledge Based Software Assistant (D White)Knowledge Based Derivation of Programs from Specifications (T Weight et al.)Automatic Functional Model Generation for Parallel Fault Design Error Simulations (S-E Chang & S A Szygenda)Visual Reverse Engineering Using SPNs for Automated Diagnosis and Functional Simulation of Digital Circuits (J Gattiker & S Mertoguno)The Impact of AI in VLSI Design Automation (M Mortazavi & N Bourbakis)The Automated Acquisition of Subcategorizations of Verbs, Nouns and Adjectives from Sample Sentences (F Gomez)General Method for Planning and Rendezvous Problems (K I Trovato)Learning to Improve Path Planning Performance (P C Chen)Incremental Adaptation as a Method to Improve Reactive Behavior (A J Hendriks & D M Lyons)An SPN-Neural Planning Methodology for Coordination of Multiple Robotic Arms with Constrained Placement (N Bourbakis & A Tascillo) Readership: Computer scientists, artificial intelligence practitioners and robotics users. keywords:

Download or read book Advances in Intelligent Autonomous Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 1999-03-31 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of twenty-three timely contributions covers a well-selected repertory of topics within the autonomous systems field. The book discusses a range of design, construction, control, and operation problems along with a multiplicity of well-established and novel solutions.

Download or read book Intelligent Automation and Systems Engineering written by Sio-Iong Ao and published by Springer. This book was released on 2011-08-19 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent systems are required to facilitate the use of information provided by the internet and other computer based technologies. This book describes the state-of-the-art in Intelligent Automation and Systems Engineering. Topics covered include Intelligent decision making, Automation, Robotics, Expert systems, Fuzzy systems, Knowledge-based systems, Knowledge extraction, Large database management, Data analysis tools, Computational biology, Optimization algorithms, Experimental designs, Complex system identification, Computational modeling, Systems simulation, Decision modeling, and industrial applications.

Download or read book Essential Electronic Design Automation EDA written by Mark Birnbaum and published by Prentice Hall Professional. This book was released on 2004 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: & Describes the engineering needs addressed by the individual EDA tools and covers EDA from both the provider and user viewpoints. & & Learn the importance of marketing and business trends in the EDA industry. & & The EDA consortium is made up of major corporations including SUN, HP, and Intel.

Download or read book Handbook of Research on Advanced Intelligent Control Engineering and Automation written by Azar, Ahmad Taher and published by IGI Global. This book was released on 2014-11-30 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: In industrial engineering and manufacturing, control of individual processes and systems is crucial to developing a quality final product. Rapid developments in technology are pioneering new techniques of research in control and automation with multi-disciplinary applications in electrical, electronic, chemical, mechanical, aerospace, and instrumentation engineering. The Handbook of Research on Advanced Intelligent Control Engineering and Automation presents the latest research into intelligent control technologies with the goal of advancing knowledge and applications in various domains. This text will serve as a reference book for scientists, engineers, and researchers, as it features many applications of new computational and mathematical tools for solving complicated problems of mathematical modeling, simulation, and control.

Download or read book Intelligent Systems and Signal Processing in Power Engineering written by Abhisek Ukil and published by Springer Science & Business Media. This book was released on 2007-09-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly experienced author sets out to build a bridge between two inter-disciplinary power engineering practices. The book looks into two major fields used in modern power systems: intelligent systems and the signal processing. The intelligent systems section comprises fuzzy logic, neural network and support vector machine. The author looks at relevant theories on the topics without assuming much particular background. Following the theoretical basics, he studies their applications in various problems in power engineering, like, load forecasting, phase balancing, or disturbance analysis.

Download or read book Artificial Intelligence written by Cherry Bhargava and published by CRC Press. This book was released on 2021-07-28 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference text discusses the fundamental concepts of artificial intelligence and its applications in a single volume. Artificial Intelligence: Fundamentals and Applications presents a detailed discussion of basic aspects and ethics in the field of artificial intelligence and its applications in areas, including electronic devices and systems, consumer electronics, automobile engineering, manufacturing, robotics and automation, agriculture, banking, and predictive analysis. Aimed at senior undergraduate and graduate students in the field of electrical engineering, electronics engineering, manufacturing engineering, pharmacy, and healthcare, this text: Discusses advances in artificial intelligence and its applications. Presents the predictive analysis and data analysis using artificial intelligence. Covers the algorithms and pseudo-codes for different domains. Discusses the latest development of artificial intelligence in the field of practical speech recognition, machine translation, autonomous vehicles, and household robotics. Covers the applications of artificial intelligence in fields, including pharmacy and healthcare, electronic devices and systems, manufacturing, consumer electronics, and robotics.

Download or read book Substation Automation Systems written by Evelio Padilla and published by John Wiley & Sons. This book was released on 2015-09-22 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substation Automation Systems: Design and Implementation aims to close the gap created by fast changing technologies impacting on a series of legacy principles related to how substation secondary systems are conceived and implemented. It is intended to help those who have to define and implement SAS, whilst also conforming to the current industry best practice standards. Key features: Project-oriented approach to all practical aspects of SAS design and project development. Uniquely focusses on the rapidly changing control aspect of substation design, using novel communication technologies and IEDs (Intelligent Electronic Devices). Covers the complete chain of SAS components and related equipment instead of purely concentrating on intelligent electronic devices and communication networks. Discusses control and monitoring facilities for auxiliary power systems. Contributes significantly to the understanding of the standard IEC 61850, which is viewed as a “black box” for a significant number of professionals around the world. Explains standard IEC 61850 – Communication networks and systems for power utility automation – to support all new systems networked to perform control, monitoring, automation, metering and protection functions. Written for practical application, this book is a valuable resource for professionals operating within different SAS project stages including the: specification process; contracting process; design and engineering process; integration process; testing process and the operation and maintenance process.

Download or read book Intelligent Digital Oil and Gas Fields written by Gustavo Carvajal and published by Gulf Professional Publishing. This book was released on 2017-12-05 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Digital Oil and Gas Fields: Concepts, Collaboration, and Right-time Decisions delivers to the reader a roadmap through the fast-paced changes in the digital oil field landscape of technology in the form of new sensors, well mechanics such as downhole valves, data analytics and models for dealing with a barrage of data, and changes in the way professionals collaborate on decisions. The book introduces the new age of digital oil and gas technology and process components and provides a backdrop to the value and experience industry has achieved from these in the last few years. The book then takes the reader on a journey first at a well level through instrumentation and measurement for real-time data acquisition, and then provides practical information on analytics on the real-time data. Artificial intelligence techniques provide insights from the data. The road then travels to the "integrated asset" by detailing how companies utilize Integrated Asset Models to manage assets (reservoirs) within DOF context. From model to practice, new ways to operate smart wells enable optimizing the asset. Intelligent Digital Oil and Gas Fields is packed with examples and lessons learned from various case studies and provides extensive references for further reading and a final chapter on the "next generation digital oil field," e.g., cloud computing, big data analytics and advances in nanotechnology. This book is a reference that can help managers, engineers, operations, and IT experts understand specifics on how to filter data to create useful information, address analytics, and link workflows across the production value chain enabling teams to make better decisions with a higher degree of certainty and reduced risk. Covers multiple examples and lessons learned from a variety of reservoirs from around the world and production situations Includes techniques on change management and collaboration Delivers real and readily applicable knowledge on technical equipment, workflows and data challenges such as acquisition and quality control that make up the digital oil and gas field solutions of today Describes collaborative systems and ways of working and how companies are transitioning work force to use the technology and making more optimal decisions

Download or read book Substation Automation Systems written by Evelio Padilla and published by John Wiley & Sons. This book was released on 2015-09-22 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substation Automation Systems: Design and Implementation aims to close the gap created by fast changing technologies impacting on a series of legacy principles related to how substation secondary systems are conceived and implemented. It is intended to help those who have to define and implement SAS, whilst also conforming to the current industry best practice standards. Key features: Project-oriented approach to all practical aspects of SAS design and project development. Uniquely focusses on the rapidly changing control aspect of substation design, using novel communication technologies and IEDs (Intelligent Electronic Devices). Covers the complete chain of SAS components and related equipment instead of purely concentrating on intelligent electronic devices and communication networks. Discusses control and monitoring facilities for auxiliary power systems. Contributes significantly to the understanding of the standard IEC 61850, which is viewed as a “black box” for a significant number of professionals around the world. Explains standard IEC 61850 – Communication networks and systems for power utility automation – to support all new systems networked to perform control, monitoring, automation, metering and protection functions. Written for practical application, this book is a valuable resource for professionals operating within different SAS project stages including the: specification process; contracting process; design and engineering process; integration process; testing process and the operation and maintenance process.

Download or read book IEC 61850 Based Smart Substations written by Yubo Yuan and published by Academic Press. This book was released on 2019-06-12 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: IEC 61850-Based Smart Substations: Principles, Testing, Operation and Maintenance systematically presents principles, testing approaches, and the operation and maintenance technologies of such substations from the perspective of real-world application. The book consists of chapters that cover a review of IEC 61850 based smart substations, substation configuration technology, principles and testing technologies for the smart substation, process bus, substation level, time setting and synchronization, and cybersecurity. It gives detailed information on testing processes and approaches, operation and maintenance technologies, and insights gained through practical experience. As IEC 61850 based smart substations have played a significant role in smart grids, realizing information sharing and device interoperation, this book provides a timely resource on the topics at hand. Contributes to the overall understanding of standard IEC 61850, analyzing principles and features Introduces best practices derived from hundreds of smart substation engineering applications Summarizes current research and insights gained from practical experience in the testing, operation and maintenance of smart substation projects in China Gives systematic and detailed information on testing technology Introduces novel technologies for next-generation substations

Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Automatic Control written by Bo Huang and published by Springer. This book was released on 2016-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of instrument electrical and automatic control system, the 5th International Conference on Electrical Engineering and Automatic Control (CEEAC) was established at the crossroads of information technology and control technology, and seeks to effectively apply information technology to a sweeping trend that views control as the core of intelligent manufacturing and life. This book takes a look forward into advanced manufacturing development, an area shaped by intelligent manufacturing. It highlights the application and promotion of process control represented by traditional industries, such as the steel industry and petrochemical industry; the technical equipment and system cooperative control represented by robot technology and multi-axis CNC; and the control and support of emerging process technologies represented by laser melting and stacking, as well as the emerging industry represented by sustainable and intelligent life. The book places particular emphasis on the micro-segments field, such as intelligent micro-grids, new energy vehicles, and the Internet of Things.